ITC 696T-FF-XXX Tread Step Light Instruction Manual

ITC 696T-FF-XXX Tread Step Light

PARTS/TOOLS NEEDED:

• Tread Step Light
  

• Drill & Drill Bit
  

• **Screws (Included)

**

IMPORTANT SAFETY INSTRUCTIONS. READ CAREFULLY FOR YOUR PROTECTION AND

SAVE ALL INSTRUCTIONS.

• Disconnect power before installing, adding or changing any component.
• To avoid a hazard to children, account for all parts and destroy all packing materials.
• It is recommended that fuse protection be added to the positive (+) input.

INSTALLATION

1. Determine the installation location for your light and mark the location of the holes needed. Center the wire exit hole between two screw holes.

2. Pre-drill a 1/4” hole for the wires.1 Pre-Drill 2 1/8” holes

3. Use the screws to attach the light housing to the desired location.
   

4. Snap the bezel on the light housing
   

5. Wire the light following the wiring diagram below.
   

For warranty information please visitwww.itc-us.com/warranty-return-
policy
DOC #: 710-00219 • Rev B • 11/02/2022
3030 Corporate Grove Dr.
Hudsonville, MI 49426
Phone: 616.396.1355
itc-us.com

Documents / Resources

| ITC 696T-FF-XXX Tread Step Light [pdf] Instruction Manual
696T-FF-XXX Tread Step Light, 696T-FF-XXX, Tread Step Light, Tread Light, Step Light, Light
---|---

References

• ITC Warranty & Return Policy

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>