TOPMAQ 7000 Evaporative Air Cooler Instruction Manual

Evaporative Air Cooler
Operating Instructions
Model： -7000

Energy Conservation & Environment Protection

Passed ISO9001:2008 Quality Management System Certification CE Certification

Preface

Thank you for choosing our evaporative air cooler. We really appreciate your trust and support.
In order to help you better use this product, we recommend you carefully read this instruction book before using. If any change has occurred to the product appearance or
contents involved in this instruction book, please refer to the real product. Your understanding is much appreciated since further notice will not be provided. We do really hope that our product can bring convenience and comfort to you.

The principle of cooling

Using effective cooling pads as evaporator, this type of air cooler makes full use of the principle of evaporative cooling. As a result, it can not only lower the temperature effectively, but also filter the dust particles in the air to improve the air quality. Details about the cooling principle: Negative pressure is produced through the air draft by the fan. At the meantime, water is transported by the water pump to the water distributor and it can wet the whole surface of the cooling pads. The special angle of the cooling pads enable the water stream to flow to the side where hot air is absorbed. A large amount of heat will be absorbed when the hot air passes the water-soaked cooling pads, resulting in the cooler, moister and fresher air that will be sent out to the room since the temperature of the air is greatly lowered and the air itself gets filtered. Then the unevaporated water drops to the bottom, forming the water cycle.

Product List:

1. a piece of machinery
2. a remote control
3. an instruction book (warranty card included)

Energy-Saving and Environmentally-Friendly

Names of Various Fuctional Parts

the LCD Panel

Control Panel and Remote Control

Power Source Button
When the power source is connected, the power pattern will light up, the buzzer will ring once and the air cooler will be in standby mode.

1. On/Off Button
   Connect the power source and press the on/off button to start the air cooler. The default state is cooling state when the air cooler is used for the first time and the operating state will remain the same when used the next time. No matter what state the air cooler is in, it will stop working once the on/off button is pressed.

2. Cooling Button
   Press the cooling button, the air cooler enters into the cooling state and the cooling pattern lights up. The default wind speed is low wind speed.

3. Wind Speed Button
   Press the wind speed button to set the satisfying wind speed. Three types of wind speed are provided: high, medium and low. The wind speed pattern will display the corresponding wind speed.

4. Wind Direction Button
   The fan blades will swing from the left side to the right side and the wind swing pattern will light up when the wind direction button is pressed. Repress the button to stop the swing.

5. Wind Type Button
   Press the wind type button to change the wind type between the standard wind , the natural wind and the sleeping wind. The corresponding pattern will display on the screen. Standard Wind: The wind type will not change once one particular wind type is chosen. Natural Wind: The wind speed will change randomly among high, medium and low. Sleeping Wind: When the wind type is changed to sleeping wind when the operating wind speed is high, the wind speed will automatically change to medium wind after half an hour. Then the wind speed will automatically change to low wind after working in the state of medium wind for another half an hour and will maintain in the state of low wind as long as no further instruction is made.

6. **** Anion Button
   Press the anion button to release anions. The anion pattern lights up at the same time.

7.  Timer Button
   The timing function will be started and the timer pattern will light up when the wimer button is pressed. Press the button continuously to adjust the time from 1hour to 9hours. The time setbu the timer will display on the screen. When the time is adjusted to 9hours, the timing function will stop working by pressing the button a second time.

8. Light Button
   The light of the LCD is on by default. Press the light button to turn off the LCD and repress it to trun it on again.

Else

1. Sound Prompt
   The buzzer will ring once every time a button is pressed, no matter it is operated through the remote control ot the control panel.

2. Water Shortage Protection
   When the water level is below the warning line, the water pump will stop working, the buzzer will send out alarm sound and the water shortage pattern will also flash. The water pump will start to work again after water is added to the air cooler.

Installation and Use

1. Open the packing box and take out the air cooler.

2. Add Water: Open the water-adding hole on the left side of the air cooler (press it to open) and add water to the water tank. Control the amount of water added by observing the water level display and pay attention to the following three points.
   • Don’t splash water onto the motor or its surrounding area lest the electrical apparatus elements will be damaged.
   • Add no more water when the water level reaches “MAX”, or the extra water will spill from the air cooler.
   • Please use clean tap water.
   

3. Connect the air cooler to the power source to enter the standby mode. Press the on/off button to start the machine and press different buttons to set the desired wind speed, wind type, wind direction and to use any other function.

4. When the air cooler is in operation, you can press the on/off button to stop it and return to the standby mode.

5. You can also use the remote control to operate the machine. The function of the remote control is the same as the control panel.
   ①、You can start to use the remote control after you open the battery cove on its back and equip it with batteries.
   ②、When you are using the remote control, please direct it to the control panel. The effective remote control distance is 10 meters.
   ③、There is a place on the top of the machine where you can place the remote control in case it will fall down.

Functions and Configurations

| brand new evaporative cooling pads, pioneers in energy saving and
environment protection| | high-capacity water tank, offering long-time cooling
---|---|---|---
| carefully choose optimized wind tube, being more silent| | humanized design, easy to move
| blow wind out in big angles, feel more confortable| | cooling and humidity- adding effect being more obvious in a traditional air-conditioning room
| set the timer function, being more intelligent| | independent moisture- keeping function, feel better in dry weather
| control from a remote distance, convenient and practical| | the brand new LCD with latest functions
| three wind speed to be chosen, able to adjust at will| | three wind types to be chosen, able to feel more naturally
| anions and oxygen function, make people feel like in natural environment such as forests and waterfall regions, replenish people with “Air Vitamin” all the time

Functions and Traits of Anions

the Generating Process of Anions in Air Cooler
After the discharge of the brand new and efficient anion generator through the carbon fiber on the open-ended high voltage terminal, anions can be generated with the combination of the electron and the oxygen in the air. With the absorption of an oxygen molecule, the anion forms into an oxygen -carrying anion. The oxygen-carrying anion possesses great liveness because it is carring air, thus the oxygen-carrying anion is called “active oxygen”.

Anions—Important Elements of Healthy Air
Relevant scientific research indicates that anion content is the key element to the air quality. The anion content of the forests, waterfalls and seasides is over one thousand times of that of urban housing areas and office buildings, this is the reason why the outside air is much fresher. The active oxygen that is formed with the combination of anions is inclined to be absorbed by human organs. The active oxygen can promote human’s growth and development, prevent many diseases and raise human’s spirits, thus is an indispensable health guardian in human’s home life.
ion：Abbreviation for Anion S： Numbers of Anion CC： Milliliter

Site| Forests and Waterfall Regions| High Mountains and Seasides| Outdoors and Fields| Parks
---|---|---|---|---
Anion Content| 100000-500000 ion S/CC| 50000-100000 ion S/CC| 5000-50000 ion S/CC| 1000-2000 ion S/CC
Degree of Relations| Possess the ability of natural healing| Sterilize and decrease disease transmission| Enhance human immunnity and antibacterial ability| Maintain basic health need

• Avoid Air-condition Disease and Enjoy Healthy Life
  People who stay in a inclosed air-conditioning room for too long are likely to catch air- condition disease (with symptoms like dizziness, insomnia, neurasthenia, decline in immunity, lapse of memory and so on). So it’s not healthy to stay in air-conditioning rooms for a long time. It has been tested that the air cooler can generate 2000,000 anions every second. After several hours, the anion content in the room will be equal to that of the forests or the waterfall regions. It will help to improve the myocardial function and the lung function, improve sleep quality, promote metabolism and strengthen human body’s disease-resistant ability.

• Anions possess the effect of dust prevention and sterilization.
  The anions carrying negative charge are sent to every corner of the room by the air cooler and the negative charge will turn the positive charge-carrying smoke and dust into neutral particle, which will sink naturally after losing liveness. After the anion integrates with the bacteria, it will change its sturcture or ability and eventually cause the death of the bacteria. Thus the anions have the ability of dust prevention, sterilizatio and health care and it’s a optimal choice to use the air cooler with anion generating ability.

Precautions for Use

Users are advised to strictly follow the following precausions when using this product. Our company will not take responsibilities for the accidents caused by the nappropriate use.

1. The water level of the water tank mustn’t go over the “MAX” scale at any time. When the air cooler is in the state of cooling, don’t let the water level go below the “MIN” scale.

2. When the environmental temperature is too high, it’s better to choose the cooling function because it can not only lower the temperature but also add moisture to the air.

3. After adding water to the air cooler, avoid incline and collision when the machine is being positioned or moved so as not to spill the water. Turnover of the machine is forbidden so as to avoid accident.

4. Other objects (other than the remote control) are not allowed to be put on the air cooler. The air outlet is forbidden to be covered and obstacles mustn’t be positioned within one meter of the machine’s front and back.

5. If the “Cooling” function is turned on when there is no water in the water tank, the water pump will not work.

6. Please pull the power plug and cut off the electricity before any cleaning or maintenance is done.

7. When you are cleaning the machine appearance, please use wet cloth (or wet cloth with some cleanser essence). Don’t use any corrosive cleanser essence to clean the machine. Also drip washing and rinsing are strictly prohibitted.

8. If the machine topples with water inside, pull the power plug immediately. The air cooler can’t be turned on again before it is completely dried, or the machine may be damaged.

9. The back of the machine can’t be positioned near the wall or curtain, or the airflow will be blocked and the effect will be badly influenced.

10. Don’t shake or knock on the machine forcibly when the air cooler is in use, or the machine will stop working automatically and have to be turned on again.

11. Please pull the power plug when the machine is not in use.
    Attention: Any part of the control panel can’t be moistened. Please pull the power plug and cut off the electricity before cleaning since the pressure inside the machine is high.

12. If the power cord is damaged, please call the specialized people from the manufacturer or the maintenance department to avoid potential danger.

13. Please keep the following three points in mind when you are replacing or handling the remote control battery.
    （1）Replace the batteries with the ones with the same specifications when changing the batteries.
    Pay special attention to the polarity.
    （2）Don’t throw away the wasted battery casually in case it will pollute the environment.
    （3）If the remote control will not be used for a long time. Please take out the battery.

14. People who are physically weak or with slow response or mental disorders (children included) are allowed to use this product only under the supervision or help of the people who are responsible for their safety.

15. Children should be supervised to prevent them from playing with the machine.

Cleaning

• Dustproof Net
  Unplug the power source, screw off the screw on the upward side of the dustproof net and then pull the dustproof net backward after pressing its buckle to take down the dustproof net. Use mild soap water and soft brush to clean the dustproof net, dry it and then put it back to the air cooler.

• Cooling Pads
  Unplug the power source, take down the dustproof net and then take out the cooling pads. Clean the cooling pads with clean water and then put it back to the air cooler.
  Attention: The water pressure can’t be too high when cleaning. Don’t use acid or alkaline detergent to clean the cooling pads.

• Water Tank
  Unplug the power source and then the choke plug of the cleaning hole on the back of the machine to drain the waste water, then add clean water into the air cooler.
  Suggestion: Replace the water with clean water everyday in case undesirable smell will be produced.

Technical Parameters

-7000
output air flow| m3/ h| 7000
voltage/frequency| v/Hz| 220/50
output power| w| 150
water consumption| L/h| 5-6
water storage capacity| L| 70
boundary dimension| LxWxH(mm)| 840X560X1350
weight| Kg| 32
dimension of air outlet| LxH(mm)| 620X660
noise| dB(A)| ≤54
applying space| ㎡| 50-60
operating current| A| 1.50

Circuit Diagram

Evaporative Air Cooler Warranty Card
Warranty Terms
Thank you for choosing our evaporative air cooler. Please read the operating instructions and warranty terms carefully before using this product.

1. After buying this product, please send the completed User Receipt and the copy of invoice to our company. We will input the sales information to our database and we will offer the maintenance service free of charge for one year.
2. If the product need any maintenance, please send it to the dealers and show them the warranty card and invoice.
3. The following circumstances don’t belong to the free maintenance range.
   Malfunction or damage caused by disassembling the machine or replacing the inner spare and accessory parts arbitrarily.
   Malfunction or damage caused by using the machine in improper environment (such as voltage instability, low hydraulic pressure, water source containing impurities and so forth).
   Malfunction or damage caused by irresistible factors (such as fire disaster and earthquake and so forth).
   Malfunction or damage caused by improper installation or other human factors.

User Stub
Please fill out the following information of User Stub.
(Please keep this stub and show it when the machine is sent for maintenance.)
Please fill out the following product information.
Product Model:
Note: The start date of the warranty period is the date when the product is purchased.
Item No.：
Please fill out the following user information.
Name of User：
Address：
Tel：
Contact Person：
Please fill out the following purchasing information.
Name of Dealer：
Contact Person：
Dealer’s Tel：
Purchasing Date：
Invoice No.：

User Receipt
Please fill out the following information of User Receipt.
Please cut this receipt along the dotted line and send it to our company.
Please fill out the following product information.
Product Model:
Note: The start date of the warranty period is the date when the product is purchased.
Item No.：
Please fill out the following user information.
Name of User：
Tel：
Address：
Contact Person：
Please fill out the following purchasing information.
Name of Dealer：
Contact Person：
Dealer’s Tel：
Purchasing Date：
Invoice No.：

Common Failures and Elimination Methods

the Indicator Light Being Dark

| 1、the power Source Having no Power
2、Main Control Panel Failure
3、the Blowout of Fuses
4、Panel Failure| 1、Restore the Power and Check the Power Supply Circuit
2、Replace the Main Control Panel
3、Replace the fuses
4、Replace the Panel

Control Failure

| 1、Power Supply Shock Interference
2、Environmental Disturbance
3、Panel Failure| 1、Turn off the Power and Restart the Machine
3、Clear up or Keep away from the Interference Source
4、Replace the Panel

No Wind Supply or Wind Speed Being Too Small

| 1、Machine Shell Get Stuck
2、Cooling Pads or Air Filter Net Stocking
3、Machine Shell Deformed
4、Panel Failure| 1、Check Whether the Motor is Damaged and Whether the Fixed Hoop and the Fan Base are Deformed
2、Clean or Replace the Cooling Pads or the Air Filter Net
3、Replace the Machine Shell 4、Replace the Main Control Panel
Motor Out of Control| 1、Main Control Panel Damage
2、Panel Failure|

1、Replace the Main Control Panel 2、Replace the Panel

Abnormal Sound

| 1、Sundries Inside
2、Fan Looseness
3、Motor Failure| 1、Take Down the Filter Net and Cooling Pads, Then Take out the Sundries
2、Tighten the Fan 3、Replace the Motor

Note: This table is only for reference. Please contact our dealer if any help is needed.

Solemn Statement: Copyright is reserved by our company. Anyone who reprints it without the permission of our company will be investigated for legal responsibility.
Our company reserves the right of altering product design and specifications. Your understanding is much appreciated since further notice will not be provided.

        Profession Ensures High Quality

Read User Manual Online (PDF format)

Download This Manual (PDF format)

Download this manual  >>