dyplay Sports Bluetooth Glasses User Manual

BE.sports
User Manual

Please read this manual carefully before using the product and keeping properly.

Introduction

Sports Bluetooth glasses are truly wireless Bluetooth glasses.
It is designed with Open Ear Audio, allowing you to enjoy music and perceive the surrounding environment while exercising; two specially designed speakers are embedded in  the frames to produce louder, and deeper voice.

Accessories

1. Bluetooth eyewear*1
2. USB Magnetic charging cable*1
3. Extra lens*3
4. Nose pads S, M, L
5. Glasses cloth*1
6. Eye box*1
7. Storage bag*1
8. Manual*1

Specifications

About 6.5 hrs（50% volume）
Charging input:| DC 5.0V    ***500mA
Charging time:| About 2 hrs
Size:| Glasses：162.9162.8*53.4mm
Charging Cable: 500mm
Weight:| Glasses:43.3g; Charging Cable: 11.8g

Product overview

Quick to use
Assemble nose pads
According to the height of your nose bridge, choose the most suitable nose pad to install on the glasses frame.

Replace the lens

1. Grasp one end of the lens with your hand, first press the nose support bracket at one end from the outside to separate the lens from the bracket, and repeat the steps with the other end.
2. The lens is pulled down.
3. After selecting the lens, snap the left and right ends of the lens into the frame. ****
4. Press the nose support bracket from the outside up to combine the lens with the bracket.

Lens transmittance

Grey: 10-11.5%
Orange red：11-19.5%
Blue：11-19.6%

Connect for the first time

1. Power on: When the frames are turned on, it automatically turns on,
   the blue light flashes for 10 seconds, and the glasses prompt “power on”.

2. Pair with your phone

1. After the glasses are turned on, they automatically enter the pairing mode, and the glasses prompt “pairing” .
2. When the glasses are in the pairing mode, search BE.sports from the phone’s Bluetooth list and click connect. After the pairing is successful, the glasses will prompt “Connected”.

3. Power off: When the frames are folded and closed, it will automa- tically shut down, the red light will be on, and the glasses will prompt “Power off “.

Note:

1. When the glasses are not connected to the device state, they will automatically enter the pairing mode after 10 seconds.
2. The pairing mode will be maintained for 5 minutes, and the glasses will automatically shut down if they are not paired with any mobile phones for more than 5 minutes.

If the electromagnetic interference signal is strong in your area, it may affect the Bluetooth connection, and the glasses may be silent or disconnected.

Function Description

Charging instructions

During use, when the red light flashes continuously, it means that the battery is low and you need to charge the glasses.
Connect the glasses to the charging cable, ensure that the magnetic contact of the glasses and the charging cable is in place, and start charging when the red indicator light of  the glasses is on. Full charge time for glasses: about 2 hours.

Charging: the red light is on
Fully charged: the red light is off

Note: When the glasses have not been used for a long time, it is reco mmended to charge the glasses at least once in 3 months to avoid the battery from running out and  entering the sleep mode.
Power display
When the glasses are connected to an iOS phone or some Android phones, the current battery level of the glasses can be displayed on the phone in real time, and when the  battery is low, the battery symbol is displayed in red, which can prompt the user to charge the glasses. For different mobile phones, the battery display method on the mobile  phone may be different. The following is a screenshot of the battery display of the iOS mobile phone.

Reset
When the glasses are in the pairing mode, click the pressure-sensitive button four times, and the red and blue lights will be on for 2 seconds at the same time to restore the factory settings.

Note: After restoring the factory settings, clear the pairing record of the glasses and the phone, turn on the frames and automati cally enter the pairing mode with the phone  (the red and blue lights flash alternately), and you need to re-pair and connect with the phone.

Care and maintenance

• When using it, please read the following suggestions to help you comply with the warranty terms and extend the life of the product.
• Keep the product dry and do not place it in a damp place, so as not to affect the internal circuit of the product. Avoid using this product during intense exercise or  sweating a lot to prevent sweat from penetrating into the product and damaging the product.
• Please clean the product before putting it away to prevent sweat from corroding the product.
• Do not place the product in a place with high temperature. High temperature will shorten the service life of electronic components,Damage the battery and deform some plastic parts.
• Do not place the product in a cold place to avoid damage to the internal circuit board.
• Do not try to disassemble the product. If you are not a professional, the product may be damaged.
• Do not drop, vibrate strongly, or hit the product with hard objects, so as not to damage the internal circuit.
• Do not use harsh chemicals or detergents to clean the glasses.
• Do not scratch the surface of the product with a sharp object, so as not to damage the shell and affect the appearance.
  If the product does not work normally, please send it to your qualified maintenance organization, and the staff will be eager to help you solve the problem.

FAQs

1. The glasses cannot be connected to the device.****

Please check the following steps in order
– Whether the Bluetooth of the device is turned on.
–  Whether the glasses have been connected back to other devices.
– At this time, the glasses cannot be found on the Bluetooth of the new device. Turn off the Bluetooth or move away from the connected device, restart the glasses, and enter  the pairing mode.

2. The red light flashes 4 times a minute.****

– The glasses battery is low and you need to charge the glasses again.

3. When charging, the red light is off.****

– The magnetic attraction of the charging cable may not be in contact with the magnetic attraction of the glasses.
– Please make sure that the metal contacts of the glasses and the charging cable are free of obstructions.
– If the glasses are not used for a long time, the battery will enter a sleep state. At this time, it needs to charge for about 30 minutes before the red light turns on.

4. No sound can be heard through the glasses****

– Confirm that the volume of the phone is appropriate.
– Confirm whether the glasses are properly connected with the mobile phone.
– Check if the glasses are too far away from the mobile phone or there are interference objects around them.

5. The glasses call is not good.****

– Check if the mobile phone is in an area with strong signal.
– The effective use distance of the glasses is 10 meters. Please confirm that the glasses are within the effective use distance and that there is no obstacle between the glasses and the mobile phone.

6. Why the glasses can`t control pause, resume and next song when playing music.****

– This function requires the mobile phone paired with the glasses to support the AVRCP (Audio/Video Remote Control Profile) protocol.
– Warning: The rechargeable battery that provides power to this product must be properly disposed of for recycling. Please contact your local recycling center for proper  disposal methods. Do not put the battery in the fire, so as not to cause an explosion.

THANKS

Thank you for purchasing our company’s Bluetooth products.
In order to provide you with a better user experience and safety protection, please read this manual carefully before using this product. And save this manual for future reference.

Read User Manual Online (PDF format)

Download This Manual (PDF format)

Download this manual  >>