dyplay ANC Pods Active Noise Cancelling True Wireless Earbuds User Manual
- June 4, 2024
- dyplay
Table of Contents
dyplay ANC Pods Active Noise Cancelling True Wireless Earbuds
Packing List
Specifications
Product Overview
Quickly Start
Insert Earbuds
Replace suitable ear tips, it is better to have a clear sense of closure after
wearing it. 
Step1. It and insert the earbuds
Step 2: Adjust the earbuds by rotating it back and forth, until it is
worn comfortably. 
Connect earbuds for the first time:
- Take out the earbuds at the same time, it will be power on automatically and into pairing mode. 12004 Ob dyplay ANC Pods
- In the Bluetooth search list, select and connect ‘dyplay ANC Pods
- After the connection is successful, the indicator light is off, and the voice prompt ‘Connected.
- Long press left ear for 2seconds or long press right ear for 2 seconds to switch ANC mode/transparency mode/ANC off.
If the wireless signals surrounding are too strong the Bluetooth connection
might be affected, causing unstable earbuds connection.
If this happens, it is suggested to reconnect the Connection or move to other
places.
Transparency mode: The pass through mode allows outside sounds to enter,
and you can be more aware of the surrounding while playing while wearing
earbuds, ANC mode.
In the active noise cancelling mode, it can cancel out the low-frequency noise
waves of the outside world, so as to obtain a better music experience.
Functional Description:
Call/Music Function
Turn ON:
Take out the earbuds from charging case and it will automatically power on;
Long press the MFB button for 5 s, it will be turned on manually. Earbuds
Interconnection:
The left and right earbud are automatically connected after being taken out of
the charging box.
Automatic connection:
Take out both earbuds, it will automatically connect back to the last
connected device.
Connect new device:
Turn off the Bluetooth or stay away from connected device. Put the earbuds
into charging case then take out and the earbuds will enter pairing/binaural
mode. Long press on earbuds for 8 seconds to cut off the connection, then the
earbuds enter pairing mode to be available for new devices. Put the earbuds
into charging case and close the case to turn it off automatically or long
press on earbuds about 10 seconds to turn it off manually.
Turn Off:
The left or right earbud will connect to the device automatically after being
taken out of charging case. If it is not connected, long press on left or
right ear- bud for 8 seconds to enter pairing mode.
Single earbud pairing:
Put it back into the charging case and close the Cover, wait 2 seconds, and
then open the cover. The lights of the two earbuds will light up at the same
time. Take out the earbuds and wait for 5 seconds, The earbuds are paired
successfully when the light of one earbuds is off.
Reset (clear pairing code):
Or put on earbuds first and then connect it with the mobile phone. Long
press on one of the earbuds for 10 seconds and you will hear prompt of
Bluetooth pairing, the prompt “paired successfully” means earbuds are paired
successfully.
Charge the charging case:
The earbuds will be charged in charging case when the cover is closed. The
charging indicator is on when it be charged with type-c cable. The LED
indicator is on with orange light in charging, and it will be off when fully
charged.
Charge the earbuds:
The white light is on during charging and it will be off after fully charged.
Warning
To avoid causing harm:
- When the product is obviously damaged, please stop using it.
- Do not use the headphones at a high volume for any extended period. To avoid hearing damage, use your headphones at a comfortable, moderate volume level.
- Be careful and follow applicable laws regarding mobile phone and headphone use if using the headphones for phone calls while driving.
- DO NOT use the ear- phone for any other purpose while driving.
- Contains small parts which may be a choking hazard.
- Not suitable for children under 3 years old.
- Please keep away from pacemakers or other magnetic goods which are susceptible to magnetic fields, especially medical supplies.
- This product contains magnetic material.
- Consult your physician on whether this might affect your implantable medical device.
- Do not use the earphone at any time the inability to hear surrounding sounds may present a danger to yo- urself or others, such as near traffic, construction site or railroad, etc.
- Listen to audio at excessive volumes can cause permanent hearing damage. Use as low a volume as possible. Over exposure to excessive sound levels can damage your ears resulting in permanent noise induced hearing loss(NIHL). Please use the following guidelines established by the Occupational Safety Health Administration (OSHA) on maximum time exposure to sound pressure levels before hearing damage occurs.
90dB SPL 95dB SPL 100dB SPL 105dB SPL
At 8 hours At 4 hours At 2 hours tl hour 110dB SPL 115dB SPL 120dB SPL
At half hour At 15 minutes Avoid or damage may occur
Other Notes:
- Do not modify the transmission frequency and increase the transmission power (including the additional radio services during use; if any interference is found, stop using it immediately and take measures to eliminate interference before continuing to use.
- The use of micropower radio equipment must endure interference from various radio services or radiated interference from industrial, scientific and medical equipment.
To protect your earphone:
- Do not place the earphone in a location exposed to moisture, dust, fumes, steam, or direct sunlight. .Do not place heavy objects or exert pressure on the machine, otherwise it may cause deformation in long-term storage.
- Do not Over impact the earphone.
- Do not use this earphone in wet places or in bad weather such as rain and snow.
- Do not disassemble or repair the earbuds by yourself.
- Do not use chemical to scrub the product.
- Adult supervision is required for children under 6 years old.
Water Proof Tips
Statements:
Any use that not specified in the instructions is considered to be a misuse of
the product; The product manufacturer does not bear any liability for losses
caused by incorrect use or other man-made negligence.
Hazardous Substances
- O: Indicates that the concentration of the hazardous substance contained in all the homogeneous materials of this part is below the limit requirement of the SJ/T11363-2006 standard.
- X: Indicates that the concentration of the hazardous substance contained in all the homogeneous materials of this part is above the limit requirement of the SJ/T11363-2006 standard.
FAQ
-
Earbuds can’ t connect to device:
Please check the following steps- Whether the device’s Bluetooth is turned on.
- Whether the earbud is connected to another device. At this time, you will not be able to find the ear bud on the Bluetooth of the new device. Turn off the Bluetooth of the connected device or stay away. Put the earbud back into the charging case and take out it, you will enter the pairing mode.
-
Only single earbud connected to the device:
Put the earbuds back to charging case, take it again and test whether interconnected successfully. Check whether the power of the earbuds is sufficient. If the power of the earbuds is too low, it will automatically shut down. At this time, it should be put back into the charging case for charging. -
Interrupt the connection during use:
It may be in an area where Bluetooth signal interference is strong. Please try the following steps- Turn off the earbud and re-pair. After the earbud is disconnected from the device, it will automatically search for pairing again. If it fails to connect again, try restarting the earbud.
- Sometimes it may be necessary to forget the earbud in Bluetooth list of the device and then connect Bluetooth again.
-
ANC don’ t have significant effect:
Active noise-cancelling earbuds will achieve better noise cancelling effect in the closed ear can- al, please check if it fits snugly How to fit: Choose the right size of ear tips, it is better to have obvious closed feeling after wearing.- After inserting the earbud into the ear, rotate to adjusting position to the appropriate depth, and at the same time, pull the ear slightly up to make the earbud deeper into the ear canal. Many people have different size ear canal. May- be you need to wear different sizes of ear tips for the left and right ears.
-
Handling of abnormal problems.
If there is an accidental disconnection /restart/ no-sound during use, can’ t finding the cause after investigation, please try the following steps to restart- Turn off the Bluetooth function of the device.
- Put the earbud in the charging case and close the case.
- Turn on the Bluetooth function of the device.
- Take off the earbud and pair it again.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>