omconnect K12 Smart Key Fob User Manual
- June 3, 2024
- OMCONNECT
Table of Contents
omconnect K12 Smart Key Fob User Manual
What’s Included
Features
Lock &Unlock
Mobile Control
Battery
Emergency
Quick Start
Step 1 >Install Battery
. Remove the (4) screws on the battery cover
. Put 4 AAA batteries into the battery dock.
Step 2 >Download Mobile App
1. Scan QR Code below and download the App and turn on your mobile Bluetooth
Step 3 >Add Device
1.Go to App Home page, click Add Device or click “+” on the upper right.
2. Press +9+ and enter Admin password + , when the light slowly blinks in blue the KeyBox is ready to pair.
3. You will see the detected device and click “Go to add”.
4. Connecting, you need to wait for few seconds to let it finish.
5. Device added
Step 4 >Change Admin Password-Initial Admin Password:123456
1. Press and hold for 3 beeps
2. Right after the 3 beeps please key in: Initial Admin Password + +new admin password+ +new admin password+
Mechanical Instructions
Password & Factory Mode:
1. Password Length
⊗ Password must be 6 digits (no more no less)
2. Add User Password
⊗ Click + 0 + until the blue light blinks
. Enter admin password +
. Enter new user password +
. Enter new user password again and press
. When the (Enter button) blinks in green, user password has been set.
3. Delete User Password
⊗ Click + 2 + until the blue light blinks
. Enter admin password and do not press any more buttons
. Enter the user password you wish to delete and press
. When the (Enter button) blinks in green the password has been deleted.
4. Delete All User Password
⊗ Click + 00000 + until the blue light blinks
. Enter admin password and press
. When the (Enter button) blinks in green all passwords have been deleted.
5. Virtual digits-Anti Peeping
⊗ Add any digits before and after the correct password the KeyBox unlock as always
6. System Lockdown
⊗ KeyBox will Lockdown for 5 minutes if entering wrong password continuously 5 times
7. Reset Factory Mode
⊗ Press and hold the reset button for 5 seconds and with a long beep
Bluetooth broadcasting & re-connecting:
⊗ Bluetooth broadcasting will turn to sleep mode if no operations within 1 minute.
⊗ Press any key to activate the Bluetooth, App&Device will get reconnected each other
App Instructions
⊗You will see all devices and rooms on the home page.
⊗Tap the Device to start operating.
⊗Tap “Me” at the bottom to manage your home
⊗ Touch the lock sign to unlock and lock.
⊗ Tap “Bell” sign to check the alarm records.
⊗ Tap “Member Management to add or delete members.
⊗ Tap “opening record” to check opening logs.
⊗ Tap “Intelligent Linkage” to turn on and off go home mode.
⊗ Tap “Set” to manage passwords
⊗Tap “Get dynamic code” to get a code.
⊗Tap “copy code” and send it to friend or family.
⊗Tap “Pen” sign to edit your personal information
⊗Go to “Members” to add family or other members
⊗Tap “+” to add family member or other members
⊗Tap “ Add it now” under Family to add family members.
⊗Owner need to complete the Home information before adding any family member
if required
⊗The member need to be registered to the App before adding as a family member
⊗ Fill up member information and set the role of the member
⊗ Tap “Save” to complete and the member will be able to operate the device on
his App
⊗ Go to “Opening Logs” to check the unlocking history
⊗ With this feature you will be able to find out when and who unlocked the KeyBox
⊗Go to “Intelligent Linkage” to set more smart functions
⊗Tap the green bar to turn on “Family go home”function.
⊗Tap the orange bar to turn on “Door lock alarm”function
⊗You will get notification if user unlocked with Bluetooth
⊗Go to “me” homepage and got to message center to check the records.
⊗Tap “password management” to add or remove codes.
⊗Tap “Temporary code” to manage online and offline codes.
⊗ Tap “one-time code” under Online Code to set an online one time code.
⊗ Tap “periodic Code” under Online Code to set a online code which will be
available in a period of time.
⊗ Tap ”One-Time Code” under Offline Code to generate a one time offline code
which will be a 10 digits code and use it when the device is offline.
⊗ Tap “Offline Temporary Code” under Offline Code t generate an offline code
(10 digits) which will be available in a period of time, and use when the
device is offline or Bluetooth disconnected with device.
⊗ Tap “Clear Code” to generate a code (10 digits) which is able to clear Codes
that need to be invalid or clear all codes.
⊗ Please note if the code less than 10 digits you need to regenerate a new
code, the code must be 10 digits.
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>