petwant F11C Smart Pet Feeder User Manual

June 3, 2024
petwant

petwant F11C Smart Pet Feeder

THANKS FOR CHOOSING OUR AUTOMATIC PET FEEDER

Components

Features

petwant-F11C-Smart-Pet-Feeder-FIG2 petwant-
F11C-Smart-Pet-Feeder-FIG3

Parameters

Name Pa「amete「S
Product Name Smart Pet Feede「
Product Model Fll-C
Dimension L377mm”‘W240mm*H37Dmm (With Food Tray)
Colo「Box Size L795mm飞’1245mm*H390mm
Material Food-gradeABS
NW Around 26KG
FoodAppliance 5~ 15mm Dry Food
PetsAppliance Cats & Small size dogs
45L
Powe「 DC 5V2A / 3 * D Size Batteries
Rated Voltage DCSV
Rated Power 25W
Working Temperatu「e S°C~40°C

Setup and Assemble Feeder

Lift The Latch

Hold the latch with your index finger and lift it up to open the lid.

Place Desiccant

Open the desiccant box on top lid, tear off the transparent wrapping paper of the desiccant bag, place it into the box and close it.

Plug in Power Adapter

  1. Battery power supply: remove the battery cover by releasing the retaining clip, insert 4 good quality alkaline “D” batteries and reinstall the battery cover.
    Note: Please use safe and standard alkaline batteries. Do not mix batteries of different specifications and models.

  2. Power adapter supply: plug in the power adapter and connect the power cable into the L-shaped card slot

Install Food Bowl Tilt the base unit back slightly, align the buckle of the food bowl with the base unit to install; the same steps to disassemble.

Fill Pet Food

Open the lid, fill the hopper with a suitable quantity of dry food well in excess of a daily amount. To maintain maximum food freshness, we recommend that a maximum of 10 days food is loaded.

Note: The device only supports 5-15mm dry pet food.

Grain Size Self-check:

Set Up Your Pet Feeder

Get Access to APP

  1. Scan the QR code to download the APP;
  2. Please login or register an account;
  3. CliCk+ on the top right in the Home page and Add the device following the instruction.

Note: Only 2.4 GHz is allowed and 5 GHz or mixed frequency is not fit for this device.

Set Up Your Programmed Feeding

The pet feeder will dispense the food based on the programmed feeding and uers can receive the feeding notifications accordingly.

Reset Your Pet Feeder

Lont press the ” button for 5 seconds to reset your feeder until you hear “Di sOund. The Link indicator will flash rapidly and now you can try to Connect your pet feeder again.

Remote Feeding

Enter device setting page and click “Feeding” , select servings and click Feed to complete the remote feeding.

Note: Users can not feed your pets via APP when powered by batteries.

Manual Feeding

Open the top lid and press the ( )” button once, then the device will dispense one serving around 10g. Repeat the above step for more servings.

Display Panel

petwant-F11C-Smart-Pet-Feeder-FIG7

Indicator Information

STATE

0

| Off| Stand -by
---|---|---

Red Flash

| Lack of food & FoodJam
Low Battery
Red Solid| Power by batteries

LINK

0

| Off| Power by batteries
Blue Flash| Devicce Connecting
Blue Solid| Device Connected

Disassemble & Clean

Power Off

Unplug and take out the alkaline batteries.

Clean the Food Hopper

  1. TO disassemble, hold both sides of the food bucket and lift upwards.
  2. Disassemble the impeller/ feeding slice and feeding mechanism.
  3. The main body of the feeder is not dishwasher-safe. Do not immerse the main body in water. This could damage the internal electronics and cause the batteries to short out, create an electrical shock, or catch fire.
  4. Make sure all parts of the feeder are completely clean and dry before filling with food.

Assemble the Food Hopper

  1. Align the food hopper with slots in the main body and press down.petwant-F11C-Smart-Pet-Feeder-FIG8
  2. Fix the feeding slice and impellers as the above picture shows. (Please pay attention to”t” shape directions.)
  3. Align the impeller bottom cover with slots and rotate in an anticlockwise direction until you hear the crack sound.
  4. Adjust the impellers and make the rubber parts cover the food outlet shown in the picture.petwant-F11C-Smart-Pet-Feeder-FIG9

If the impellers are not well fixed, it may cause the device not able to dispense the food.

Clean the Food Bowl

The food bowl is dishwasher-safe once removed from the main body.

Clean the Body

Use a dry soft cloth to wipe it, the body is not waterproof, please do not Use a wet cloth.

Replace the desiccant pack

Open the desiccant box cover and replace the desiccant pack. It is suggested to replace it every one or two months.

Replace Alkaline Batteries

Unplug and open the battery lid at the bottom, then you can replace the batteries; Replace Alkaline Batteries Take out the food hopper and empty the food hopper then fill the fresh food and proceed with instant feeding once.

Warnings

  1. Please keep the food hopper dry after cleaning it.
  2. Please replace the food on a regular basis if your pets did not eat up. (For ume period, please rerer to the food packing instruction)
  3. Please clean and maintain your device on a regular basis to prolong the using period of your pet feeder

Safety Precautions

Read all instructions carefully before attempting to operate this device.

Ensure power supply

  1. Please check the power supply before going out;
  2. Please use 5V 2A Plug for normaly power supply;
  3. The camera function will be off when switch to battery mode, the pet feeder will dispense the food normally based on your programmed feeding in the APP;
  4. When device is offline, APP can not get access to the dispense situation.

Keep Device

  1. The device needs to be placed horizontally and firmly, it’s not allowed to be tipped one side and rock or upside down.
  2. Keep the device placed in a dry area and not expose the device under sunlight. Also not to place the feeder in a high place to avoid the damage from dropping;
  3. Do not remove any parts from the feeders beside food tray and food hopper.
  4. Do not place anything on top of this feeder.
  5. Ensure there is no barriers near the food outlet to make the pets can be fed normally.

Caution

  • For indoor use ONLY.
  • Is NOT dishwasher-safe? Hand clean only.
  • For dry food use ONLY. Works best with 5-15 mm food diameter or smaller.
  • NOT recommended for puppies or kittens less than 7 months old or unable to reach the feeding dish.
  • DO NOT use this feeder with puppies, kittens, dogs or cats With any physical disability.
  • Intended for use with dogs or cats ONLY. DO NOT allow small children to play With, in or around the feeder.
  • Check the START light frequently to ensure the feeder will dispense properly.
  • Before leaving for an extended time, always replace Battery Backup with 3 new “D” size batteries.
  • DO NOT place any foreign objects in the feeder.
  • DO NOT operate feeder without Bowl, Food Hopper and Lid securely in place.
  • To avoid tripping, always keep power cord out of the way of foot traffic. Feeder must be placed on a level surface.
  • DO NOT disassemble feeder other than Bowl, Lid and Battery Cover.
  • Dispose of all packaging material properly. Some items may be packed in poly bag; these bags could cause suffocation; keep away from both children and pets.
  • DO NOT attempt any repairs or modifications to the feed
  • Check with your veterinarian if you are unsure about the proper MEAL SIZE for your pet.
  • Please do not touch the camera t0 avoid the scratches and oil stain.

FCC Compliance Notice

This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.

Any changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment. This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures.

  • Reorient or relocate the receiving antenna.
  • Increase the separation between the equipment and the receiver.
  • Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
  • Consult the dealer or an experienced radio/TV technician for help.

FCC Radiation Exposure Statement

This equipment complies with FC radiation exposure limits set forth for an uncontrolled environment. This transmitter must not be co-located or operating in conjunction with any other antenna or transmitter. This equipment should be installed and operated with a minimum distance 20cm between the radiator& your body.

manufacturer. Shenzhen Qianhai Runway technology L0., LID address: Room 201, Block A, No.1, Qianvwan Road 1, Qianhai Shenzhen Hong Kong Cooperation Zone, Shenzhen.

FAQ

What happened to

your device

|

How to check by yourself

|

How to solve it

---|---|---
Unable to

assemble the f ood hooper

|

: ee l o rop er yl

| check and assemble the impellers again

Device Abno rmal

| Impurities inside food hopper| Clean the impurities insid e of food hopper
Food size

in app licabl e

|

Ensure to use 5-1Smm dry food

Pho t oelectric sensor faulty|

Contact After -sale Service

Moto r faulty

|

Contact After-sale Service

Food Jam

| Food excessive in food tray| Empty the food tray and set up the suitable servings for your pets
Food jammed in food outlet|

Ensure to use 5-1Smm dry food

Food outlet got blocked by food|

Remove and clean the food outlet

Food outlet is not clean|

Use soft cloth to clean the food outlet

In frared Sensor Defective|

Contact After-sale Service

Lack of Food

|

Lack of food

| Supplement the food and instant feed once
Food hopper not fix well| Take out the food hooper and chec k if all the accessories are aseembled properly

Device Offline

| Device is in battery mode| Check if power cut or power adapter is fixed properly
Network abnormal or something wrong withwifi|

Please check if the WIFI is norma l and re-connect the pet feeder

MainboardDefective

|

Contact After -sale Service

Read User Manual Online (PDF format)

Loading......

Download This Manual (PDF format)

Download this manual  >>

petwant User Manuals

Related Manuals