Petwant F13-W 6 Meal Smart Pet Feeder User Manual

Petwant F13-W 6 Meal Smart Pet Feeder

Please read the manual carefully before using this product.

Use Safety Guide

Device placement

1. Please keep device in the stable wireless environment.
2. Pet feeder should be placed on a level surface. Do not place or store an appliance where it can fall or be pulled.
3. For indoor household use only and away from direct sunlight or wet areas.
4. Do not place the feeder under temperature of O 0 c.
5. Do not place any foreign object in the pet feeder.
6. Make sure there is no objects on and around the food bowl to prevent pets from eating normally.

Important Safety Information

1. APP connection has to be plugged in, unless wifi function will stop work.
2. This product is only applicable to cats and small dogs.
3. Do not allow small children to play with, in or around pet feeder.
4. The filling in the ice pack is not edible. If it is damaged, do not use it.
5. Do not immerse control board in water. The device should not be submerged in water at anytime, as this may damage electronic components.
6. Do not disassemble the pet feeder other than components.
7. Do not place or store an appliance into a tub or sink.
8. Please avoid the charging port from getting wet. If the charging port is wet, it should be fully dried before charging.
9. Always make sure you use the original charger that came with your device.
10. Always unplug the feeder when not in use.
11. Do not allow pets to chew on or swallow any parts.
12. Do not use the pet feeder for any purpose other than feeding pets.

Components

Display Panel

Parameters

Installation And Setup

Open the Lid
Laid the feeder flat, pull up the ring lock at the back of the feeder with one hand and lift the whole top lid.

Place the Ice Pack
Take out the ice packs, place the ice packs horizontally in the refrigerator freezer (- 18 ° C) and freeze it for at least 6 hours, then take it out for use.

*Note:
Do not freeze the ice packs vertically, which will cause the ice pack bulge.
No need ice pack for dry pet food.
The fresh-keeping effect of ice packs are affected by environmental factors.

Fill up Pet Food

1. Place the food bowl into the base unit, and then fill up with pet food in turn.
2. Cover the top lid and lock it.
   

App Download

Scan the QR code to download the APP.

*Note:
Only 2.4Ghz is allowed and 5Ghz or mixed frequency is not fit for this device.

Unlock the Display

Press the ” < ” and ” > ” button for 3 seconds at the same time to unlock the display, and then the screen will light up.
press the ” < ” and ” > ” button for 3 seconds at the same time again to lock the display, and then the screen darkens and the lock indicator will light up.

Instant Feed
Unlock the display, long press ” <” button to do instant feed once.

Reset WiFi
Unlock the display, long press ” º ” button for 7 0 seconds to reset WiFi.

Indicator Information

| Off| No Power/ By Batteries
---|---|---
Blue Solid| Device Connection Successful
Orange Slow Flash| Device Connecting
Orange Quickly Flash| WiFi Connecting/Device Offline
| White Solid| Control Lock
| Red Flash| Device Abnormal
| Off| Charging
Red Solid| Power by batteries
Red Flash| Low Battery

App Specific Operation

1. Download the app and sign in with your exclusive account.
   

2. After entering the interface If the device automatically discovers Click “Add” go to step 5.
   

3. Or you can click “+” in the top right corner and click “Add Device” .
   

4. After entering the interface, wait for the device to be discovered automatically and click “Add”.
   

5. Input WiFi password ( username cannot use Chinese , password cannot take special symbol).
   

6. Waiting to connect to the network.
   

7. Add successfully, you can customize the device name , click “Done”.
   

8. Click “Feed” to feed a meal immediately.
   Click “Add plan” to set the feeding plan.
   

9. You can set the time according to your pet’s eating pattern.
   You can choose from Monday to Sunday and click “Save”.
   

10. You can delete or add plans, but you can set up five meals.
    

11. You can check the feeding records at any time.
    

12. In the Settings menu, you can click “Share Device” to share the device with multiple people.
    

Cleaning & Maintenance

Clean product interior and food bowl

1. Rotate the control board clockwise, and take it out.
   

2. All parts are washable except the control board. Do not use metal stuff for cleaning to avoid damaging the product surface.
   

*Note:
After feeding fresh food or canned food, suggest to wash it immediately every day.

Clean the Main Board

Take out the main board, wipe the outside with soft wet cloth.

*Note:
The main board is not waterproof and can not be washed.

Install the Control Board

1. Align the main board buckle with the bottom housing installation slot, hold and rotate it counterclockwise to hear a “click” sound.
   

2. Check whether the main board is installed in place
   

*Note:
If the control board is not installed properly, the food bowl will be misaligned and then the feeder can’t normal use.

FAQ

board installed properly
Device Abnormal| Contact after-sales
Device Abnormal| Impurities inside food tray| Clean the impurities inside of food tray
Photoelectric sensor faulty| Contact After-sale Service
Motor faulty| Contact After-sale Service
Device Offline| Device is in battery mode| Check if power cut or power adapter is fixed properly
Network abnormal or something wrong with wifi| Please check if the WIFI is normal and reconnect the pet feeder
Mainboard Defective| Contact After-sale Service

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>