SPARK MS-TA13F Delay On Time Relay Instruction Manual
- June 4, 2024
- Spark
Table of Contents
SPARK MS-TA13F Delay On Time Relay
SAFETY PRECAUTIONS
- The device must be installed by a qualified person,
- Disconnect all power before working on the device. Don’t touch any terminal when the power is ON.
- Verify correct terminal connection when wiring.
- Don’t dismantle or repair the device whether it operates normally, otherwise, no responsibility is assumed by the producer and seller.
- Never use the device at the site which can be invaded by coTode gas, strong sunshine light and rain.
- Clean the device with a dry cloth.
- Fail to follow these instructions will result in serious injury or death.
FEATURES
- Microcontroller based
- Delay ON
- Repetition accuracy $0.2%
- LED indication for power supply and relay status
- 1 Modute Din-rait mounting
TECHNICAL DATA
| Supply terminals | A1 , A2 |
|---|---|
| Supply voltage | AC/DC 24-240V |
| Rated frequency | 50/60Hz |
| T,me range | See timing range table |
| Setting accuracy | <5% |
| Repetition accuracy | s0.2% |
| Output contacts | 1 C/O |
| Current rating | 8A/AC1 |
| Contacts capacity | AC-15: 2A |
| Insulation voltage | 250V |
| Protection degree | IP20 |
| Pollution degree | 3 |
| ElectricaUife | 105 |
| Mechanical life | 106 |
| Altitude | s2000m |
| Ambient temperature | -5°C-+40°C |
| Storage temperature | -10°C-+50°C |
| Wire size | 0.5mm2-1mm2 |
| Torque | 0.5Nm |
| Mounting | TH-35 DIN-Rail |
APPEARANCE
DELAY ON TIME RELAY
Please read complete instructions prior to installation and operation of the device.
TIMING RANGE TABLE
FUNCTION DIAGRAMS
WIRING DIAGRAM
DIMENSIONS
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>