beko HSM35050 Freestanding Chest Freezer User Guide

beko HSM35050 Freestanding Chest Freezer

Product Information

• Product Name: Chest Freezer
• Model Number: HSM35050
• Languages: English, Romanian, Czech, Slovak, Hungarian, Bulgarian, Lithuanian, French, German, Italian, Finnish, Dutch, Latvian, Estonian
• Refrigerant: R600a
• Warning: The refrigerating appliance uses a completely environmentally friendly refrigerant, the R600a, which is flammable only under certain conditions. Please observe the following rules to ensure normal operation:
• Do not hinder the free circulation of air around the appliance.
• Do not use mechanical devices to accelerate defrosting other than the ones recommended by the manufacturer.
• Do not destroy the refrigerating circuit.
• Do not use electric appliances inside the food-keeping compartment other than those recommended by the manufacturer.

Product Usage Instructions

1. Setting up:
   • Ensure there is enough space around the chest freezer for proper air circulation.
   • Place the chest freezer on a level surface.
   • Remove any packaging materials and accessories from the chest freezer.
2. Electric connection:
   • Connect the chest freezer to a grounded electrical outlet using the provided power cord.
   • Make sure the voltage and frequency of the electrical outlet match the specifications of the chest freezer.
3. Freezer operation:
   • Refer to the appliance description section in the user manual for a detailed explanation of the chest freezer’s features and controls.
   • Follow the recommended freezer operation procedures for optimal performance and energy efficiency.
4. Advice for food conservation:
   • Refer to the advice for food conservation section in the user manual for tips on storing different types of food in the chest freezer.
   • Ensure proper packaging and labeling of food items to maintain their quality and prevent freezer burn.
5. Defrosting of the appliance:
   • Follow the defrosting instructions provided by the manufacturer to remove ice buildup from the chest freezer.
   • Do not use mechanical devices or sharp objects to speed up the defrosting process.
6. Cleaning of the appliance:
   • Regularly clean the interior and exterior surfaces of the chest freezer using mild detergent and a soft cloth.
   • Avoid using abrasive cleaners or sharp objects that may damage the appliance.
7. Replacing the interior light bulb:
   • Refer to the user manual for instructions on how to safely replace the interior light bulb.
   • Ensure that the chest freezer is disconnected from the power source before replacing the light bulb.
8. Defects finding guide:
   • If you encounter any issues or defects with the chest freezer, refer to the defects finding guide in the user manual for troubleshooting steps.
   • If the issue persists, contact the manufacturer or authorized service center for assistance.

Congratulations for your choice!

• The chest freezer you have purchased is one in the BEKO products range and represents a harmonious joint between the refrigeration technique with the aesthetical outlook. It has a new and attractive design and is built according to the
• European and national standards which guarantee its operation and safety features. At the same time, the used refrigerant,
• R600a, is environment-friendly and it does not affect the ozone layer.
• In order to use the best your freezer, we advise you to read carefully the information in these user instructions.

Advice for recycling your old appliance

• If your newly purchased appliance replaces an older appliance, you must consider a few aspects.
• The old appliances are not valueless scrap. Their disposal, while preserving the environment, allows the recovery of important raw materials.

Make your old appliance useless :

• disconnect the appliance from the supply;
• remove the supply cord (cut it);
• remove the eventual locks on the door to avoid the blocking of children inside, while playing, and the endangering of their lives.
• The refrigerating appliances contain insulating materials and refrigerants which require proper recycling.
• Original Spare parts will be provided for 10 years, following the product purchasing date.

INFORMATION

• The model information as stored in the product database can be reached by entering the following website and searching for your model identifier (*) found on the energy label.
• https://eprel.ec.europa.eu/.

Please scan the QR code to find all the information relating to the packaging and how to manage the packaging waste This appliance is not intended for use by a person with reduced physical, sensory or mental capabilities or lack of experience and knowledge unless they have been given supervision or instruction concerning use of the appliance by a person responsible for their safety. Children should be supervised to ensure that they do not play with the appliance.

Packing Recycling

WARNING!

• Do not allow children to play with the packing or with parts of it. There is the risk of suffocation with parts of corrugated cardboard and plastic film.
• In order to get to you in good condition, the appliance was protected with suitable packing.
• All the materials of the packing are compatible with the environment and recyclable. Please help us recycle the packing while protecting the environment!

IMPORTANT!

• Before putting the appliance in operation, read carefully and entirely these instructions. They contain important information concerning the setting up, use, and maintenance of the appliance.
• The manufacturer is free of any responsibility if the information in this document is not observed. Keep the instructions in a safe place in order to reach them easily in case of need. They can also be useful subsequently by another user.

ATTENTION!

• This appliance must be used only for its intended purpose, (household use), in suitable areas, far from rain, moisture, or other weather conditions.

Transport instructions

• The appliance must be transported, as much as possible, only in a vertical position. The packing must be in perfect condition during transport.
• If during transport the appliance was put in a horizontal position (only according to the markings on the packing), it is advised that, before putting it into operation, the appliance is left to rest for 4 hours in order to allow the settling of the refrigerating circuit.
• Failure to observe these instructions can cause the breakdown of the motor compressor and the cancellation of its warranty.

Warnings and general advice

• Do not plug in the appliance if you notice a failure.
• The repairs must be done only by qualified personel.
• In the following situations please unplug the appliance from the mains:
  • when you defrost completely the appliance;
  • when you clean the appliance.
• To unplug the appliance, pull by the plug, not by the cable!
• Ensure the minimum space between the appliance and the wall against which it is placed.
• Do not climb on the appliance.
• Do not allow the children to play or hide inside the appliance.
• Never use electric appliances inside the freezer, for defrosting.
• Do not use the appliance near heating appliances, cookers or other sources of heat and fire.
• Do not leave the freezer door open more than it is necessary to put in or take out the food.
• Do not leave the food in the appliance if it is not working.
• Do not keep inside products containing flammable or explosive gases.
• Do not keep inside fizzy drinks (juice, mineral water, champagne, etc.) in the freezer: the bottle can explode! Do not freeze drinks in plastic bottles.
• Do not eat ice cubes or ice cream immediately after having taken them out of the freezer because they may cause „freezer burns”.
• Never touch cold metal parts or frozen food with wet hands because your hands can quickly freeze on very cold surfaces.
• For the protection of the appliance during warehousing and transport, it is provided with spacers between the door and the cabinet (on the front and rear sides). These spacers will be removed before putting the appliance into operation.
• Excess deposits of ice on the frame and the baskets should be removed regularly with the plastic scraper provided. Do not use any metal parts to remove the ice.
• The presence of this ice build-up makes it impossible to close the door correctly.
• If you do not use your appliance for a few days, it is not advisable to switch it off. If you do not use it for a longer period, please proceed as follows :
  • unplug the appliance;
  • empty the freezer;
  • defrost it and clean it;
  • leave the door open to avoid the formation of unpleasant smells.
• If the supply cord is damaged, it must be replaced by the manufacturer, its service agent or similarly qualified persons in order to avoid a hazard.
• If your appliance has a lock, keep it locked and store the key in a safe place, out of the reach of children. If you are discarding an appliance with a lock, make sure that, is made ineffective. This is very important so as to avoid children being trapped inside, which may cause their loss of life.

Setting up

• Your product was designed to operate at an ambient temperature between -5°C and +43°C. If the ambient temperature is above +430C, inside the appliance the temperature can increase.
• Set up the appliance far from any source of heat and fire. Placing it in a warm room, direct exposure to sunbeams or near a heat source (heaters, cookers, ovens), will increase the energy consumption and shorten the product life.

Please observe the following minimum distances:

• 100 cm from the cookers working with coal or oil;
• 150 cm from the electric and gas cookers.
• Ensure the free circulation of the air around the appliance, by observing the distances shown in Item 2.
• Place the appliance in a perfectly even, dry, and well-ventilated place. Assemble the supplied accessories.

Electric connection

Your appliance is intended to operate at a single-phase voltage of 220-240V/50 Hz. Before plugging in the appliance, please make sure that the parameters of the mains in your house (voltage, current type, frequency) comply to the operation parameters of the appliance.

• The information concerning the supply voltage and the absorbed power is given on the marking label placed in the back side of the freezer.
• The electric installation must comply with the law requirements.
• The earthing of the appliance is compulsory. The manufacturer has no responsibility for any damage to persons, animals or goods which may arise from the failure to observe the specified conditions.
• The appliance is endowed with a supply cord and a plug (European type, marked 10/16A) with double earthing contact for safety. If the socket is not the same type as the plug, please ask a specialized electrician to change it.
• Do not use extension pieces or multiple adapters.

Hot Surface Warning!
Side walls of your product is equipped with refrigerant pipes to improve the cooling system. Refrigerant with high temperatures may flow through these areas, resulting in hot surfaces on the side walls. This is normal and does not need any servicing. Please pay attention while touching these areas.
Switching off
The switching off must be possible by taking the plug out of the socket or by means of a main two-pole switch placed before the socket.

Operation

Before putting into operation, clean the inside of the appliance (see chapter „Cleaning”). After finishing this operation please plug in the appliance, and adjust the thermostat knob to an average position. The green and red LEDs in the signaling block must light. Leave the appliance to work for about 2 hours without putting food inside it. The freezing of the fresh food is possible after min. 20 hours of operation.

Appliance description

1. Door handle
2. Door
3. Lamp housing
4. Baskets
5. Tray
6. Lock housing
7. Thermostat box

Freezer operation
Temperature adjustment The temperature of the freezer is adjusted by means of the knob assembled on the thermostat (item.3) , position „MAX” being the lowest temperature. The achieved temperatures can vary according to the conditions of use of the appliance, such as place of the appliance, ambient temperature, frequency of door opening, and extent of filling with food of the freezer. The position of the thermostat knob will change according to these factors. Normally, for an ambient temperature of approx. 320C, the thermostat will be adjusted to an average position. The signaling system is placed on the front side of the freezer (Item 4).
It includes:

1. Thermostat adjustment knob – the inside temperature is adjusted.
2. green LED – shows that the appliance is supplied with electric energy.
3. red LED – damage – lights if the temperature in the freezer is too high. The LED will operate 15-45 minutes after the putting into operation of the freezer, then it must go off. If the LED goes on during the operation, this means that defects have occurred.
4. LED Orange– fast freeze function activated –by setting the knob to Superfreeze position the orange led goes on, showing that the appliance entered into the “fast freeze” mode. The three LEDs give information about the mode of operation of the freezer

Advice for food conservation

• The freezer is intended to keep the frozen food for a long time, as well as to freeze fresh food.
• One of the main elements for successful food freezing is the packing.
• The main conditions that the packing must fulfill are the following: to be airtight, to be inert towards the packed food, to resist low temperatures, to be proof of liquids, grease, water vapors, and smells, and to be able to be washed.
• These conditions are fulfilled by the following types of packing: plastic or aluminum film, plastic and aluminum vessels, waxed cardboard glasses, or plastic glasses.
• Fluids can leak from foods placed in your freezer without wrapping or with damaged wrapping. The leaking fluids can corrode your freezer’s metal surfaces, warp its plastic surfaces, and lose its hygiene conditions (leading to odor and bacterial formation).
• Therefore, store your food completely sealed with the types of wrapping recommended in your freezer’s user manual.
• To avoid damaging your freezer and its metal surfaces, store acidic foods (peeled fruit, tomatoes, citrus fruits, etc.) and salted foods (smoked meat, salted fish, salted cheeses, home-cooked meals, etc.) in containers or wrapping materials suitable for freezer use.

IMPORTANT!

• For freezing the fresh food please use the supplied baskets of the appliance.
• Do not place into the freezer a too large quantity of food at a time. The quality of the food is best kept if they are deeply frozen as quickly as possible. This is why it is advisable not to exceed the freezing capacity of the appliance specified in the ” Product Fiche
• The fresh food must not come into contact with the food already frozen.
• The frozen food you have bought can be placed into the freezer without having to adjust the thermostat.
• If the freezing date is not mentioned on the packing, please take into consideration a period of max. 3 months, as a general guide.
• The food, even partially defrosted, cannot be frozen again, it must be consumed immediately or cooked and then refrozen.
• The fizzy drinks will not be kept in the freezer.
• In case of a power failure, do not open the door of the appliance. The frozen food will not be affected if the failure lasts less than 67 hours.

Freezing with Superfrost

• Place the knob to the super frost position. The Superfrost lamp comes on.
• Wait 15 hours.
• Before placing the fresh food in the freezer do not forget to change the knob to the previous position.

Important
When you place the knob in the Superfrost position, the compressor might not switch on for a few minutes. This is due to the integrated rise-delay switch which is designed to increase the life span of the refrigeration unit.

• You should not switch on the Superfrost function:
• when placing frozen food in the freezer;
• when freezing up to approx. 2 kg fresh food daily.

Defrosting of the appliance

• We advise you to defrost the freezer at least twice a year or when the ice layer has an excessive thickness.
• The ice build-up is a normal phenomenon.
• The quantity and the rapidity of ice buildup depend on the ambient conditions and on the frequency of the door opening.
• We advise you to defrost the appliance when the quantity of frozen food is the least.
• Before defrosting, adjust the thermostat knob to a higher position so that the food stores more cold.
• Unplug the appliance.
• Take out the frozen food, wrap it in several sheets of paper, and put it in the refrigerator or a cool place.
• Take the separator panel and put it under the freezer in the direction of the dripping tube.
• Take out the obstructing plug. The water that results will be collected in the special tray (separator panel). After the melting of the ice and the run-off of the water please wipe with a cloth or with a sponge, then dry well.
• For a fast thaw please leave the door open.
• Do not use sharp metal objects to remove the ice.
• Do not use hairdryers or other electric heating appliances for defrosting.

Inside cleaning
Before starting the cleaning, unplug the appliance from the mains.

• It is advisable to clean the appliance when you defrost it.
• Wash the inside with lukewarm water where you add some neutral detergent. Do not use soap, detergent, gasoline, or acetone which can leave a strong odor.
• Wipe with a wet sponge and dry with a soft cloth.
• During this operation, avoid the excess of water, in order to prevent its entrance into the thermal insulation of the appliance, which would cause unpleasant odors.
• Do not forget to clean also the door gasket especially the bellow ribs, by means of a clean cloth.

Outside cleaning

• Clean the outside of the freezer by means of a sponge soaked in soapy warm water, wipe with a soft cloth, and dry.
• The cleaning of the outside part of the refrigerating circuit (motor compressor, condenser, connection tubes) will be done with a soft brush or with the vacuum cleaner.
• During this operation, please take care not to distort the tubes or detach the cables.
• Do not use scouring or abrasive materials!
• After having finished the cleaning, replace the accessories at their places and plug in the appliance.

Replacing the interior light bulb

• If the lamp burns out, disconnect the appliance from the mains. Take out the lamp trim. Make sure the lamp is screwed correctly.
• Plug in the appliance again. If the lamp still does not go on, replace it with another one model E14-15W. Mount back the lamp trim in its place.
• The lamp(s) used in this appliance are not suitable for household room illumination. The intended purpose of this lamp is to assist the user in placing foodstuffs in the refrigerator/freezer in a safe and comfortable way.
• The lamps used in this appliance have to withstand extreme physical conditions such as temperatures below -20 °C.

Defects finding guide
The appliance does not work.

• There is a power failure.
• The plug of the supply cord is not inserted well into the socket.
• The fuse is blown.
• The thermostat is in the „OFF” position.

The temperatures are not low enough(red LED on).

• The food prevents the door from closing.
• The appliance was not placed correctly.
• The appliance is placed too close to a heat source.
• The thermostat knob is not in the correct position.

Excessive ice build-up

• The door was not closed properly. The inside lighting does not work
• The lamp is blown. Unplug the appliance from the mains, take out the lamp, and replace it with a new one.

The following are not defects

• Possible noddings and cracks coming from the product: circulation of the refrigerant in the system.

Noises during operation

• In order to keep the temperature at the value you have adjusted, the compressor of the appliance starts periodically.
• The noises which can be heard in such situations are normal.
• They are reduced as soon as the appliance reaches the operation temperature.
• The humming noise is made by the compressor.
• It can become a little stronger when the compressor starts.
• The bubbling and gurgling noises coming from the refrigerant circulating in the pipes of the appliance are normal operating noises.

Warning!
Never try to repair the appliance or its electric components. Any repair made by an unauthorized person is dangerous for the user and can result in warranty cancellation. The symbol on the product or on packaging indicates that this product may not be treated as household waste. Instead, it shall be handed over to the applicable collection point for the recycling of electrical and electronic equipment. By ensuring this product is disposed of correctly, you will help prevent potential negative consequences for the environment and human health, which could otherwise be otherwise, be caused by inappropriate waste handling of the product. For more detailed information about recycling this product, please contact your local city office, your household waste disposal service, or the shop where you purchased the product.

References

• Beko Global
• Home | Ministerul Mediului

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>