Drinkpod DPFZPODPRO-SS Stainless Steel Premium Soda Machine Instruction Manual

Drinkpod DPFZPODPRO-SS Stainless Steel Premium Soda Machine

PRODUCT CONFIGURATION

OPERATION GUIDE

Remove rear cover
Grasp the back cover with your right hand,press the separation key with your index finger,and push upward.

Install cylinders.
Hold the machine on your left hand,put the cylinders in the slot with your right hand, and rotate the cylinders into the machine clockwise.

Install rear cover
Grasp the middle of the rear cover with your right hand aim at the 4 screws of the fuselage,push down.

Install water bottles
Pour water into the highest scale of the water bottle and screw the water bottle into the machine clockwise.

Inflating operation
Press the inflation button for 1-2 seconds each time, repeat 2-3 times, release the inflation button after hearing the exhaust sound, and wait for the pressure to be released.

Remove the water bottle
After the pressure relief is completed, when the bubbles are flowing upward in the water bottle, the water bottle can be removed according to the counterclockwise direction.

SODAPOD DETAILS

One Key Operation.
Gas injection,exhaust,and one key operation are simple and convenient.

Scientific Design Of Trachea.The Outlet Pressure Is Even.
The ingenious design of the vent hole enables a perfect infusion of gas which creates a better taste.

Lock Buckle Design.
Securely latches on the Sodapod to eliminate leaks. Comfortable ergonomic design.

Study &Durable Base.
Includes a Detachable easy to clean water tray that compliments the Stainless Steel Design.

SAFETY GUIDELINES

Never Carbonate Anything Other Than Plain Water
When carbonating, a small amount of liquid could bubble up through the valves. If the water contains sugar or other compounds the valves could start malfunction and the product could potentially be dangerous to use. Never add fruit slices, ice and flavours in the water bottle. Use a pitcher or mix it directly in your ass. Rinse the water bottle carefully before filling it with water.

Never Clean The Water Bottle In The Dishwasher
The water bottle is designed to withstand pressures up to double the working pressure of the carbonator. However, this ability is quickly destroyed if the bottle is exposed to heat above 40 degrees Celsius. Most dishwashers operate at very high temperatures so therefore never put the bottle in the dishwasher.

KeepThe Sparkling Water Maker Away From Potential Sources Of Heat
Due to the laws of physics, the pressure in the gas cylinder depends on the outside temperature.
The Aarke sparkling water maker is optimized for using the gas cylinder at room temperature. If the cylinder gets too hot, it could be dangerous to use the machine.

MATTERS NEEDING ATTENTION

Notes On The Operation Of The Machine

1. After receiving the machine, please refer to the parts indicated in the manual to see if all the parts are complete; If you find any damage or loss, please contact Drinkpod Support

2. Before using, please read the instructions carefully and strictly:

3. When each operation, the water added should not exceed the highest water level;
   Do not add any fruit dew, syrup, etc. after mixing pump;

4. During use, do not unscrew the cylinder without unscrewing the water bottle .

DAILY MAINTENANCE

Use And Maintenance Of Soda Dispensers

1. After each use, please clean the fuselage carefully. Do not scratch the fuselage with sharp tools to avoid damaging the fuselage;
2. When transporting, make sure that the cylinders are not put on the soda dispenser;
   If it is not used for a long time, please clean the machine, dry it and place it in the package box.

Water Bottle Use And Maintenance

1. The water bottle is made of food-grade PET materials, and it is usually used to avoid scraping with sharp instruments;
2. Do not add heat above 104F;
3. If not, use a mild detergent to clean it, and cool and dry it and place it in a place where the sun can not shine;
4. Do not pump into an empty bottle without adding water
5. If the bottle has been deformed, damaged or the service life has come to an end, please replace the new bottle in time.

Use And Maintenance Of Cylinders

1. Co2 cylinders are pressure vessels, remember to stay away from sharp instruments, fire, electricity, etc., stored in shade;
2. When the cylinder is used, the surface of the cylinder will quickly cool down, and attention will be paid to prevent freezing hands;
3. As the cylinder valve is a precision part, the non-professional must not remove it and must always keep the valve clean;
4. When the cylinder leaks, press several times on the cylinder valve thimble with a hard instrument to prevent the leak several times. If it does not work, please contact the manufacturer;
5. Cylinders can be recycled for 5 to 6 years. Professionals are requested to maintain and test the cylinders tightness each time it is refilled.

PRODUCT ASSURANCE

• All Drinkpod appliances include a one year warranty on parts and/or the actual Drinkpod appliance if deemed as a factory defect. Extended warranties are available for purchase on our website.

AFTER-SALES SERVICE

• For any product problems, or for replacement of inflatable service, please Contact our after-sales service staff in time.

www.drinkpod.com

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>