Mega fox V08753/V08754 1500 Watt Smart Panel Heater User Manual

Mega fox V08753/V08754 1500 Watt Smart Panel Heater DESCRIPTION

Always keep your bedroom, living room or outdoor toilet at the desired temperature with the Smart Panel Heater! For example, let it start heating before you wake up, or stop heating when the sun goes down. Make heating as smart as you want with
self-programmed schedules.

CONTENTS

1 x Smart Panel Heater 2x base
6X plug
Bx M48mm screws 6x M435mm screws 1 x remote control
4X mounting bracket 1 x operating manual

TECHNICAL SPECIFICATIONS

Power: 1500W
Power supply: 210-240V
Frequentie: 50-60Hz
Nominal heat prod: 2 kW
Dimensions: 67 x 42,5 cm

USER MANUAL

1. I nstal I the Smart Life app
2. Add the Smart Panel Heater to the app
3. Install the Smart Panel Heater
4. The control panel
5. Using smart functions
6. Problems and solutions

INSTALL THE SMART LIFE APP

1. Download the Smart Life app for iOS or Android for free.
2. Open the Smart Life app and tap ‘Register’ or log in with an existing account.
3. Read the privacy policy and tap ‘Agree’ to continue.
4. Please enter your e-mail address to receive a verification code, which will be sent to the e-mail address provided.
5. Enter the verification code to proceed to the next screen.
6. Choose a secure password and tap the button to complete your registration.
7. Go to ‘Account’ and tap ‘Family management’ to set up your smart home. Enter a name for your smart home and select which rooms you want to add.
8. Tap ‘Done’ to complete the installation.

ADD THE SMART PANEL HEATER TO THE APP

The Smart Panel Heater can be added in two different ways:

• By scanning the QR code
• Manually

Scanning the Qr Code

1. Switch on the Smart Panel Heater.
2. Make sure your smartphone is connected to your Wi-Fi network*.
3. Open the Smart Life app and tap ‘+’ to select the device you want to add.
4. Open the Smart Life app and press the plus sign in the top right of the main screen to add a device:
5. And then press the square with the dash in it on the top right:
6. Your phone’s camera will open, then scan the following qr code with your phone to add the Smart Panel Heater:
7. Follow the steps in the app to complete the installation.
8. lf the Panel Heater does not flash quickly, reset it by putting it in standby mode and pressing the power button for 5 seconds.

Manually adding the Smart Panel Heater

1. Switch on the Smart Panel Heater.
2. Make sure your smartphone is connected to your Wi-Fi network.
3. Open the Smart Life app and tap ‘+’ to select the device you want to add.
4. Select “small household appliances”.
5. Select “heating (wifi)”.
6. Follow the steps in the app to complete the installation.

INSTALL THE SMART PANEL HEATER

Before installation, check that all parts are complete and the product is intact.
The Smart Panel Heater can be installed free-standing or on the wall.

Freestanding installation
If you want to use the electric heater as a free-standing unit, mount it with the feet provided and follow the instructions below. Ensure that the heater is mounted on a flat, stable and clean surface.

1. Turn the product upside down on a soft cotton cloth or carpet to avoid damage.
2. Attach the feet to the bottom of the heating element with the screws provided. Align the holes in the foot with the holes in the feet, insert the screws through the holes and tighten them with a screwdriver.

Installation on the wall

1. Take 4 brackets, 6 plugs and 6 screws from the box, and attach 2 brackets to the wall according to the distances between the holes of the bracket, as shown in the illustration below. Use the included measuring template to easily drill the holes in the right position
2. Attach 2 brackets to the bottom of the product, as shown in the picture below.
3. Hold the side of the Smart Panel Heater, look at the position of the wall slot of the back cover, and slide the wall to the top of the slot.

Note: Before drilling, make sure that there are no cables or other pipes on or in the wall in order to prevent damage. Remember that the screws must be firmly and securely seated in the wall to ensure safe installation of the electric heater on the wall. Observe the safe distance below.
During installation, ensure that the heating element is placed at a safe distance from flammable materials, gas and water.
When installed on the wall, the installation height must be more than 15 cm from the ground and at least 50 cm from the ceiling.

THE CONTROL PANEL

1. Switching on and off
   The heater emits a beep when it is switched on. The heater will start in standby mode, displaying the WiFi symbol and the current temperature of the room.
   Press the ON/OFF button. You see the heating icon and the ECO mode icon. This means that the device is in ECO mode.

2. Changing the heating mode
   To change the heating mode, press the MODE button to cycle through the modes: ECO mode, Comfort mode and Anti-freeze mode. The mode icons will flash as you go through them. After a few seconds the icon will stop flashing and the heater will start heating in that mode.

3. Setting the desired temperature
   The set temperature of Eco mode and Comfort mode can be adjusted with the UP and DOWN buttons. The temperature range is from 5°C to 50°C. In Antifreeze mode, the Smart Panel Heater will ensure that the temperature always remains above 5°C.

4. Timer for switching off
   To set the timer, press the TIME button while the heater is in heating mode. The timer range is 1 – 24 hours. The numbers will flash during the setting process and then the display will return to heating mode. The timer icon on the display indicates that the timer has been set. The heater will continue to heat until the set time has elapsed.

5. Time for switching on
   To schedule your heating to turn on later, press the TIME button in standby mode. U. The delay range is 1 – 24 hours. The numbers will flash during the setting process and then the display will return to heating mode. The timer icon on the display indicates that the timer has been set. The heater will be switched on when the delay has elapsed.

6. Child lock
   To activate the padlock, press and hold the UP button. The padlock icon will appear on the screen and the control panel will be locked. To unlock, press and hold the DOWN button. The padlock icon will disappear, indicating that all buttons can be used again.

7. Switching off the display
   Pressing and holding the time button will turn off the display illumination. Press any button later to turn the display back on. When the display is off, the Smart Panel Heater can still be operated via the app, but it will not make any sound when changing settings.

8. Remote control
   The remote control button and functions are all the same, but the buttons on the remote control do not have a “hold” function. The range of the remote control is 2 metres.

USING SMART FUNCTIONS

The same actions can be performed in the Smart Life app as on the control panel.

In addition, smart scenarios can be set, which allow the device’s settings to be adjusted when various conditions are met. For example, weather conditions that require the device to be on or off, or sunrise or sunset that require the device to be on or off. You can also create scenarios in which the device works together with other Smart Home devices that you have added to the Smart Life app.

Creating a scenario

1. Go to the main screen of the Smart Life app
2. Press “Smart” at the bottom
3. Then press the plus sign in the top right corner to create a new scenario.

A scenario consists of the following components

1. The conditions that the scenario must fulfil (e.g. 10 a.m., sunrise, when another device turns on).
2. The device that should do something (e.g. the Smart Panel Heater).
3. The action to be performed by the unit (e.g. switch off, switch on, set another temperature).
4. (optional) Additional follow-up actions (e.g. pause, switch off again, adjust temperature).
   An example is shown below:

SAFETY TIPS

1. Do not allow bare skin to come into contact with the surface of the device during operation: risk of burns.
2. The heating element is suitable for indoor use only. Do not use it outdoors.
3. Do not use the heating element near flammable or explosive materials: fire or explosion hazard.
4. It is strictly forbidden to insert any objects into the protective grille of the heating unit as there is a danger of electric shock.
5. Remove the plug from the socket if the heating device is not used for a long time.
6. Never cover the heater. If you cover the heating element, you risk overheating and causing a fire.
7. This device is not intended for use in bathrooms, washrooms or similar places where moisture can occur. Never place the heating element in a place where it may fall into a bathtub or other water container.

CLEANING
Always disconnect the appliance and allow it to cool down completely before carrying out maintenance. Use a hoover to remove dust on grilles. Clean the outside of the unit with a damp cloth and then dry it with a dry cloth. Never immerse the appliance in water or allow water to drip into it.

STORAGE
Always disconnect the unit, let it cool down completely and clean it before storing it. If you are not going to use the unit for a long time, put the unit and the instructions back in the original box and store it in a dry and ventilated place. Do not place heavy objects on the box during storage as this may damage the appliance.

PROBLEMS AND SOLUTIONS

Problem: The Smart Panel Heater does not turn on.
Cause: Device is tilted.
Solution: Install the device in an upright position. It has a sensor that switches it off if it is tilted or falls over.

Problem: The Smart Panel Heater does not connect to my network.
Cause: Wifi netwerk is Dual Band van 5GHz.
Solution: Change the settings of your router so that your network only transmits 2.4GHz. If necessary, switch off Dual band temporarily or rename the 5GHz network.

Problem: The Smart Panel Heater does not connect to my network.
Cause: The Smart Panel Heater is not in pairing mode.
Solution: Reset the Smart Panel Heater by pressing and holding the power button for 5 seconds.

© 2022, actie.deals B.V. All rights reserved. Made in China

Read User Manual Online (PDF format)

Download This Manual (PDF format)

Download this manual  >>