RUKKET B07ZQQ1DDB Glow in the Dark Kickball Set Instruction Manual
- June 3, 2024
- RUKKET
Table of Contents
B07ZQQ1DDB Glow in the Dark Kickball Set
Instruction Manual
B07ZQQ1DDB Glow in the Dark Kickball Set
Please call us if you have any questions or concerns at 1-855-4RUKKET Please read our product safety warnings before setup
Inclued Equioment
| A Transparent Pitcher Plate | F Transparent Home Plate |
|---|---|
| B Air Needles | G White Glow Stick with Hook |
| C Air Pump | H Green Glow Stick x100 pcs. |
| D Glow in the Dark Kickball | I Connectors for Glow Stick x100 pcs. |
| E Transparent Square Plate | J Mesh Bag |
HOME PLATE ASSEMBLY
- Take two individual glow sticks out and bend them until you hear a crackling sound and see them light up.
- Lay the base flat on the ground with the clips facing up. Take one of the sticks and slide it diagonally into the clips.
- Take the second glow stick and slide it into the other two clips. This stick will sit on top of the stick attached in Step #2.
4. Once the glow sticks are securely attached, fip the base over so the glow sticks are touching the ground.
1. Take four individual glow sticks out and bend them until you hear a
crackling sound and see them light up. Also take two connector tubes per
base.| 2. Lay the base fat on the ground with the clips facing up. Take one
of the connector tubes and attach it to one end of the stick. Slide
the stick diagonally into one clip.| 3. Then, slide the second stick
diagonally through the second clip and attach it to the connector tube.
4. Next, take the second connector tube and attach it
to one end of the third stick. Slide the stick diagonally
into the remaining clip.| 5. Then slide the fourth stick diagonally through
the final clip and attach the connector tube.| 6. Once the glow sticks are
securely attached,
fip the base over so the glow sticks are touching
the ground.
PITCHER PLATE ASSEMBLY
- Take two individual glow sticks out and bend them until you hear a crackling sound and see them light up.
- Place the plate with the clips facing up. Take one of the glow sticks and slide it diagonally into the clips.
- Take the second glow stick and slide it diagonally into the other two clips. This stick will sit on top of the stick attached in Step #2.
4. Once the glow sticks are securely attached, fip the plate over so the glow sticks are touching the ground.
BASES ASSEMBLY
- Take two individual glow sticks out and bend them until you hear a crackling sound and see them light up.
- Lay the base flat on the ground with the clips facing up. Take one of the sticks and slide it diagonally into the clips.
- Take the second glow stick and slide it into the other two clips. This stick will sit on top of the stick attached in Step #2.
- Once the glow sticks are securely attached, flip the base over so the glow sticks are touching the ground.
1. Take four individual glow sticks out and bend them until
you hear a crackling sound and see them light up. Also take two
connector tubes per base.| 2. Lay base flat on ground with clips facing up.
Take one of the
connector tubes and attach it to one end of the stick. Slide the
stick diagonally into one clip.| 3. Then, slide the second stick diagonally
through the second clip and attach it to the
connector tube.
4. Next, take the second connector tube and attach it
to one end of the third stick. Slide the stick diagonally
into the remaining clip.| 5. Then slide the fourth stick diagonally through
the final clip and attach the connector tube.| 6. Once the glow sticks are
securely attached,
flip the base over so the glow sticks are touching
the ground.
Rukket.com
Rukket Sports