Soundcore P2 Frames Landmark Bluetooth Audio Smart User Manual

Table of Contents

Soundcore P2 Frames Landmark Bluetooth Audio Smart

Carefully unpack the box and check if the following parts are included.
If any part is damaged, do not use it, contact Soundcore retailer or customer service.
Soundcore Frames (Audio Temples)
Tour Frame
Carry Case
Magnetic Charging cable
Cleaning Cloth

Push the audio temples into position on the hinges so they are securely attached.
If you want to change the tour frame (sold separately), hold the quick release hinges and pull the audio temples slightly to disassemble.

Set up when you use it for the first time.

When you connect both audio temples to the charging cable, the LED indicator on the charging cable will turn green.
Wait for 1 minute, then wear your Soundcore Frames. They will automatically power on and enter Bluetooth pairing mode. When you hear the prompt voice, select “Soundcore Frames” on your device’s Bluetooth list to connect.

Use the provided magnetic charging cable to prevent any damage.
Fully charge your Soundcore Frames before the first use.
1. Align the charging pins on the magnetic charging cable with the charging port on the audio temples.
If correctly connected, the LED indicator on the charging cable will turn green.
2. Connect the end end of the charging cable into a USB charger.

Soundcore P2 Frames Landmark Bluetooth Audio Smart - fig
2

| Steady green| Being charged
---|---|---
| Light off| Fully charged

Powering On/Off

Soundcore P2 Frames Landmark Bluetooth Audio Smart - fig
3

Automatic Pairing

Soundcore Frames will automatically enter Bluetooth pairing mode when you wear them.
Select “Soundcore Frames” on your device’s Bluetooth device list to connect.
Each time you power on your Soundcore Frames, they will automatically connect to your last successfully connected device if available within the Bluetooth range.

Manual Pairing

To pair with another device, wear them and press and hold the logo area on both audio temples for 3 seconds until you will hear the voice prompt.

The touch button for all functions is located in the logo area on the audio temples.
Touchpad controls can be customized in the Soundcore app.
Adjust the volume by using the volume controls on your mobile device.

Play/Pause	Tap twice
Next track	Slide backward (logo area)
Previous track	Slide forward (logo area)

Answer/End a call	Tap twice

You can enable voice control and choose your language in the Soundcore app (Currently, only English and Chinese are available.)
Easily control with no wake up word.
Only the 8 voice commands above are supported.

The playback will auto-pause when taking Soundcore Frames off, and it will resume when you wear them.

Download the Soundcore app to enhance your experience.
User interface customization: Touch controls (control playback, activate Siri) can be customized in the app.
EQ settings: There are various EQ settings you can choose from in the app to optimize your experience while enjoying different music genres.
Voice control: Access voice control and select your language in the app.
Firmware upgrade: You will be informed once the new version of firmware is detected when you connect your Soundcore Frames with the app. Ensure to keep the firmware up to date before each use.

Reset

Reset your Soundcore Frames if you encounter any connection or function problem.
Press and hold the logo area on both audio temples for 10 seconds until you hear the voice prompt.

Make sure to fully charge the built-in battery before storing them for a long period of time.
Do not intentionally immerse the device in water or expose it to seawater, salt water, chlorinated water, or other liquids (such as beverages).
Do not expose the device to pressurized water, high velocity water, soapy water, or extremely humid conditions (such as a steam room).
Do not spill any food, oil, lotion, or other abrasive substances on the device.
Clean this device with a soft, dry cloth. Do not use water, chemicals, or abrasive materials to clean the frames. To clean the lenses, use an alcohol free lens cleaner and a soft cloth.
Please keep the glasses in a dry environment. Try to use a hair dryer with cold wind to dry the product if it was drowned in water.