Shenzhen Leshi Video Technology L872Y AI PTZ Floodlight Security Camera Installation Guide

Shenzhen Leshi Video Technology L872Y AI PTZ Floodlight Security Camera

AI PTZ Floodlight Security Camera

Mounting Position And Protection Zone

Check Wi-Fi availability

The AI Floodlight Cam needs a stable and sufficient strong Wi-fi connection.

• Please choose the location where you would like to position your AI Floodlight Cam and check the strength of the Wi-fi signal using your smartphone.
• The table above indicates whether the WiFi signal is strong enough for use in combination with the AI Floodlight Cam.

Ideal installation height of motion detection

AI PTZ Floodlight Security Camera is an outdoor security camera integrating surveillance and lighting with a WiFi connection.

• Camera with built-in AI suspicious intrusion detection algorithm; avoiding false alarms.
• Alarm sound and lighting switch can be set up on the APP.
• Combine outdoor security surveillance with lighting.
• 1080P, 3MP full HD.
• Amazon cloud and TF card storage for option.

Installation Illustration

AI Floodlight Cam needs a 12V2A power supply

WARNING

Before you start the installation please ensure the power is switched off at the main power switch.

Safety instructions:

• Prior to installation or maintenance, the electricity supply must be turned off.

Installation notes:

• The height of installation from the ground is suggested around 9 feet.(3 meters)
• The motion sensor (Factory settings)has a horizontal range of 24 feet (8 Meters). The default setting of sensibility as “Middle”.

Accessories

(American Standard)

⑥

| Hook
③| Wire Nuts(3)|  | Install Manuals(3)

(European Standard)

FCC Warning

This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions:

1. This device may not cause harmful interference.
2. this device must accept any interference received, including interference that may cause undesired operation.

This device must be installed to provide a separation distance of at least 20 cm from all persons and must not be collocated or operating in conjunction with any other antenna or transmitter.

Parameters

NOTE 1: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help

NOTE 2: Any changes or modifications to this unit not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>