WINNTEC 09807 Y440105 Engine Leveller Instruction Manual

: June 3, 2024
: WINNTEC

Table of Contents

WINNTEC 09807 Y440105 Engine Leveller
SAFETY INSTRUCTIONS
- Important:
GUARANTEE
OPERATION
MAINTENANCE
References
Read User Manual Online (PDF format)
Download This Manual (PDF format)

WINNTEC 09807 Y440105 Engine Leveller

WINNTEC-09807-Y440105-Engine-Leveller

SAFETY INSTRUCTIONS

Danger / Caution: This picture indicates risk of personal injury and/or the possibility of damage.
Note: This picture indicates supplementary information.

Important:

Please read the following instructions carefully, failure to do so could lead to serious personal injury and / or damage to the item.
When using your engine leveller, basic safety precautions should always be followed to reduce the risk of personal injury and / or damage to the product or load.
Read all of these instructions before operating the product and save this user manual for future reference.
The product should not be modified or used for any application other than that for which it was designed.
It was designed for lifting engines & loads up to 680kg. If you are unsure of its relative applications do not hesitate to contact us and we will be more than happy to advise you.
Before operating the product always check no parts are broken, and that no parts are missing.
Always operate the product safely and correctly.

KNOW YOUR EGINE LEVELLER: Read and understand the owner’s manual and labels affixed to the product. Learn its applications and limitations, as well as the potential hazards specific to it.

KEEP CHILDREN AND UNTRAINED PERSONNEL AWAY FROM THE WORK AREA: All visitors should be kept at a safe distance from the work area; never allow untrained persons to operate the shop press.

STAY ALERT: Always watch what you are doing and use common sense.

NEVER LEAVE THE ENGINE LEVELLER UNATTENDED: When in use / under load.

HAVE YOUR PRODUCT REPAIRED BY A QUALIFIED PERSON: The product is in ac- cordance with the relevant safety requirements. Repairs should only be carried out by qualified persons using original spare parts, otherwise this may result in considerable danger to the user and void the warranty.
DANGER! Check that the product is in sound condition and good working order; Take immediate action to repair or replace damaged parts.
WARNING! Only operate on a level and stable surface and never use on soft ground where the product is likely to “sink” whilst in operation.

NEVER STAND ON THE PRODUCT: The product is not designed for this purpose.
DO NOT dismantle or tamper with the product, as this may be dangerous and will invalidate the warranty.

If a problem with the product is experienced or suspected stop using the product immediately and contact your distributor for repair.
Do not attempt to apply a load that exceeds the rated capacity of the product. Regularly inspect, clean and lubricate the product, ensuring that it is in good working order and condition.
Always ensure that the work area is clean and tidy, free from unrelated materials and has adequate lighting.
Keep hands, limbs etc. clear of moving parts during operation.
Failure to follow the warnings in this manual, may result in personal injury and/or property damage.
Prior to applying the load, be sure that all chains are secure and connected correctly.
Components of this product are specially designed to withstand the rated capacity. Do not substitute bolts, pins, or any other components.
Always lift the load evenly. Offset loads can cause damage to the product and the item being lifted..
Before operating, check for signs of cracks, bent support pins , loose or missing bolts, or any other structural damage. Do not operate if any of these conditions exist. Have repairs made only by an authorised service centre / engineer.
Due to various applications, it is your responsibility to always use adequate protection, such as eye protection and heavy protective clothing, when operating this .
Do not stand in front of work area where the load is applied.
If the product appears to be damaged in any way, is found to be badly worn, or operates abnormally IT SHOULD BE REMOVED FROM SERVICE until necessary repairs are made by an authorised service centre.
Danger: Never exceed the maximum capacity of 680kg, overloading can lead to personal injury or damage to the pipe bender.
CAUTION: The warnings and cautions mentioned in this user manual can not cover all possible conditions and situations that may occur. It must be understood by the oper-ator that common sense and caution are factors which cannot be built into this product, but must be applied.
Understand the operating environment; Before each use the operator should as-sess, understand and where possible reduce the specific risks and dangers associat-ed with the operating environment. Bystanders should also be made aware of any risks associated with the operating environment.

GUARANTEE

This Winntec Engine Leveller is covered by a 3 year parts and labour warranty covering failure due to manufacturers defects. This does not cover failure due to misuse or operating the product outside the scope of this manual – any claims deemed to be outside the scope of the warranty may be subject to charges Including, but not limited to parts, labour and carriage costs.
This guarantee does not cover consumables such as nuts, bolts, etc. In the unlikely event of warranty claims, contact your distributor as soon as possible.
Note: Proof of purchase will be required before any warranty can be honoured.

OPERATION

Raise a Load Squarely.

Attach the leveller to the load via the recommended lifting points.
If this is an engine, ensuring that all necessary components are disconnected, i.e. exhaust, gearbox, cables, electrical connections etc.
Very slowly take the weight of the engine.
As the load begins to lift it may rise unevenly at one end only.
Turn the crank handle of the Leveller so that the load moves AWAY from that end. Continue to raise the load a little at a time whilst moving the load away from the raised end until the load rises squarely.
If there is a degree of twist, this may be taken up by adjusting the chain and shackle arrangement to lengthen or shorten the hooks as appropriate.
ALWAYS ensure that the FULL thickness of the bolt is in contact with the threaded end of the shackle.
If this method is insufficient to compensate for the degree of twist, you should adjust the chain length on one or more of the lifting points.

Raising a Load at an Angle

In some cases, it may be necessary to raise the load at an angle.
Adjust the chains and shackles appropriately, and select the correct hole in the sliding bar.
Gently raise the load,turning the crank handle as required to achieve the required degree of tilt.

MAINTENANCE

Always visually inspect before each use to ensure no cracks are present and no damage is evident, and that the tool is in good general condition.
If it is damaged or if in doubt as to its serviceability, consult SIP After Sales – 01509 500400 or your local SIP distributor. Remove from service immediately.

Regularly:-

Check the sliding bar for wear, damage and distortion.
Lubricate lightly the sliding bar and adjusting lead screw.
Inspect the chains for damage, wear, elongation etc.
If any irregularities are present change them.

Please dispose of packaging for the product in a responsible manner. It is suitable for recycling. Help to protect the environment, take the packaging to the local amenity tip and place into the appropriate recycling bin.
Never dispose of electrical equipment or batteries in with your domestic waste. If your supplier offers a disposal facility please use it or alternatively use a recognised recycling agent. This will allow the recycling of raw materials and help protect the environment.

FOR HELP OR ADVICE ON THIS PRODUCT PLEASE CONTACT YOUR DISTRIBUTOR, OR SIP DIRECTLY ON:
TEL: 01509 500400
EMAIL: sales@sip-group.com
technical@sip-group.com
www.sip-group.com