Coleman Even Heat Barbecue with 2 Burners Instruction Manual

Coleman Even Heat Barbecue with 2 Burners

85-3046-2 (G35301) Propane 85-3047-0 (G35302) Natural Gas

Limited 5-Year Warranty
Read and save manual for future reference. Assemble your grill immediately. Missing or damaged parts should be claimed within 30 days of purchase.For product inquiries, parts, warranty and troubleshooting support, please call 1-800-275-4617.

• www.colemanbbqs.com

HEAVY ARTICLE NEEDS 2 TO LIFT

THIS MANUAL MUST REMAIN WITH THE PRODUCT AT ALL TIMES

To ORDER non-warranty replacement parts or accessories, or to register your warranty, please visit us on the web at www.colemanbbqs.com

CAUTION
Sharp edges. Wear gloves when assembling your grill.

CAUTION
Read and follow all safety statements, assembly instructions, and use and care directions before attempting to assemble and cook.

INSTALLER OR ASSEMBLER/CONSUMER
This manual should be kept with the BBQ at all times.

WARNING
Failure to follow all of the Manufacturer’s instructions could result in hazardous fires, explosions, property damage, or serious personal injury or even death. Follow all leak check procedures carefully prior to operation of barbecue, even if grill was dealer assembled. Do not try to light this barbecue without reading the Lighting Instructions section of this manual.

DANGER

1. If you smell Gas:
   • Shut off gas to the appliance
   • Extinguish any open flame
   • Open lid
   • If odor continues, keep away from the appliance and immediately call your gas supplier or your fire department
2. Requires two people to complete the assembly process.
3. Beware of sharp edges.

WARNING

1. Do not store or use gasoline or other flammable liquids or vapours in the vicinity of this or any other appliance.
2. An LP cylinder not connected for use shall not be stored in the vicinity of this or any other appliance.

Parts List (propane) for 85-3046-2 (G35301)

ASSEMBLY INSTRUCTIONS

Separate the 2 different types of castors: 2 locking castors (EF) and 2 regular castors (EG). Insert the U Pin (#11) into one of the regular castors (EG), as shown in image B. Attach the regular castor (EG) to the front of the bottom shelf (EE), and use the Pin (#11) to secure and tighten. Repeat for remaining 3 castors (EF & EG).

NOTE: Regular castors (EG) need to be assembled to the front of the bottom shelf (EE), and locking castors (EF) need to be assembled to the back of the bottom shelf (EE), as shown in image A.

YOU WILL NEED

Ensure that the locking castors (EF) are firmly locked in the “ON” position before continuing. Assemble the left side panel (EA) and the right side panel (EB), to the bottom shelf (EE).

YOU WILL NEED:

THIS STEP REQUIRES 3 PEOPLE. DO NOT ATTEMPT ALONE. EXTREMELY HEAVY!

• Position the top lid assembly and burner box assembly (A & B) onto the cart assembly (C), as shown.

Attach the upper back panel (CJ) to both the left and right side panels (EA & EB). DO NOT tighten screws until all hardware has been positioned.

YOU WILL NEED

Assemble the door support rail (CN) to the left and right upper side panels (EA and EB), as shown.

WARNING: This part may have sharp edges. Wear protective gloves when assembling.

YOU WILL NEED

Electronic Ignition Assembly

• Remove the ignition battery cover (CC2) and the plastic nut from the electronic ignition box (CC1)

• Position the electronic ignition box (CC1) through the opening in the right side panel (EB) and secure using the nut.

• Insert an “AA” battery into the battery compartment, as shown. Secure using the ignition button cover (CC2).

• Insert the two Electrode set, main burner (CD) wires into the Electronic ignition assembly (CC1) as shown.
  NOTE: All main burner electrode wire connection points are the same size.

• Insert the Instastart™ ignition button (CC3) wires into the Electronic ignition assembly (CC1), as shown in figure C.

• Position the Quick Clean™ grease tray (CH) onto the right and left tracks (CL and CM), as shown.

• Position the QUICK CLEAN™ grease cup (CI) in position under the under the QUICK CLEAN™ grease tray (CH).

• Position the Even Heat™ heat distribution plates (BD) into the burner box (BA) as shown.

• Place the cooking grates (BE) into the burner box (BA), as shown in figure B.

• Assemble the warming rack (BF) by inserting the three fixed pins into the three holes provided on the burner box back panel (BA), as shown.

ADDITIONAL WARNINGS

You have now completed the Assembly of your COLEMAN® EVEN HEAT™ BARBECUE.

NEXT STEPS

1. Position your BARBECUE
2. Read SAFE USE CARE MANUAL
3. Perform Grill Safety Check-list

WARNING: FOR YOUR FAMILY’S SAFETY, DO NOT ATTEMPT TO LIGHT THIS BBQ UNTIL YOU HAVE REVIEWED PAGES 4-7 OF THE COLEMAN SAFE USE AND CARE MANUAL. ALL SAFETY AND LEAK TESTS MUST BE PERFORMED BY THE END USER, PRIOR TO LIGHTING THIS BBQ.

WARNING HOT SURFACES

POSITION YOUR BARBECUE

• Always confirm that this Barbecue is not positioned under a combustible object (e.g., an awning or umbrella) or in a covered area (e.g., porch or gazebo) before lighting it, to prevent a possible fire.
• Always confirm that this Barbecue is not positioned under the overhang of a house, a garage or other structure before lighting it. An overhang will serve to deflect flare-ups and radiate heat into the structure itself, which could result in a fire.
• Always confirm that this Barbecue is positioned more than 36” (91.4cm) away from any combustible materials or surfaces before lighting it, and that no gasoline or other volatile substances are stored in the vicinity of this Barbecue. The temperature of a grease fire or of the radiated heat might otherwise be sufficient to ignite nearby combustibles or volatile substances. Do not position near windows, siding, or fencing.
• Always locate the Barbecue where there will be ample combustion and ventilation air, but never position it in the direct path of a strong wind.

References

• Repair Your Grill: Shop Replacement Parts for 24,880 Models
• Coleman Grill Parts - Select From 255 Models

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>