SPORTSTECH DFX50 Underdesk and Ondesk Elliptical User Manual
- June 3, 2024
- 0Xiaomi POCO
Table of Contents
SPORTSTECH DFX50 Underdesk and Ondesk Elliptical User Manual
Dear customer,
We are pleased you chose a device from the SPORTSTECH product range.
SPORTSTECH sports equipment offers you high quality and new technology.
In order to fully use the potential of your device and be able to enjoy it for many years, please read this manual carefully before starting up and beginning of training, and use the device according to the instructions. The operational safety and function of the device can only be guaranteed if the safety instructions in this user manual are observed. We shall not assume any liability for damages resulting from improper use or incorrect operation.
- ⚠ Make sure that ALL persons using the device have read and understood this user manual. Keep this manual close to the device.
- ℹ Adhere to ALL Safety Advices in this manual.
- NEVER overexert yourself or others when using the device.
Our video tutorials for you!
Assembly, use, disassembly.
- Scan the QR code
- Watch videos
- Start fast and safely
Link to the videos: https://service.innovamaxx.de/dfx50_video
We are also on social media!
Get the latest product information, training content and much more on our:
https://www.instagram.com/sportstech.de
https://www.facebook.com/sportstech.de
IMPORTANT SAFETY INFORMATION
⚠ Read all instructions and safety advices before using this training device. Follow them carefully! Also apply common sense for preventing any risks!
GENERAL PERSONAL REQUIREMENTS
-
Only persons who are physically and mentally fit may use the training device. Handicapped persons may only use the device with suitable supervision and assistance.
-
Never overexert yourself or anyone else on the training device! Always consider the individual basic fitness and daily form of the person exercising. Use pulse rate and the general well-being to assess this.
-
If necessary, seek medical advice before training; especially when you are older or have medical problems, or when you have only little experience in physical training.
-
The maximum permitted weight for using the training device is 120 kg.
PREPARING AND HANDLING THE TRAINING DEVICE -
Use the training device only indoors. Put it onto a firm and level ground. Use a mat to prevent damage to the ground.
-
Ensure a minimum free space of 2 meters (6.5 ft) around the training device.
-
Apply the training device only for private use, but not for commercial use.
-
Do not attempt any maintenance or adjustments other than those described in this manual. In case of any problems, stop using the device and consult an Authorized Service Representative.
-
When assembling the device, make sure to use all required parts for the connections (e.g., washers).
-
Before each training session, make sure all connections are tightly fastened. Re-tighten, if necessary.
-
Also check before each training that all securing parts (e.g., lock pins, protective covers) are applied and that all other parts of the device are in proper condition.
-
Prevent sweat, dirt and liquids (like drinks) from entering the training device or the computer. Damage caused by perspiration or other liquids are not covered at any time by the warranty.
-
Note the advices for handling the power supply.
PRECAUTIONS DURING THE TRAINING
- Always warm up sufficiently before exercising and cool down after the training.
- Do not continue the training in case of limb pain, chest pain, nausea, shortness of breath or similar. Seek medical advice before continuing.
- Wear clothes tight enough to avoid getting caught by machine parts. Use hair protection if you have long hair.
- Keep children and pets away from the training device while in use and also when stored.
- Only one person at a time may use the training device.
- Perform all movements carefully: Avoid accidentally bumping the training device.
- Climbing onto the training device: The pedal on your side must be in its lowest position. Hold the grips of both handlebars with your hands. Then step with the proper foot onto the low pedal. Then step with the other foot on the other pedal.
- When you have a safe stand, move the pedals and the handlebars with suitable speed by coordinating your hands and feet.
- Leaving the training device: Bring one pedal to the lowest position. Hold both handlebars. Then first take your foot from the higher pedal to the floor on the other side. Keep holding the handlebars and step down from the lower pedal, too.
- Attention! Do not use the device while standing. Do only use the device when you are sitting. Standing on the device may cause serious injury.
ASSEMBLY INSTRUCTION
Firmly tighten all component parts and pre-assembled parts!
Step 1
- Attach the two foot-stands to the main unit by aligning the recesses and holes in the foot-stands with the main frame.
- Insert the screws from below through the stands and screw them onto the frame with a screwdriver.
Step 2
- Observe the labels R (right) and L (left). Components with the same label belong together!
- Turn the right pedal (R) clockwise into the crank arm (R).
- Turn the left pedal (L) counter clockwise into the crank arm (L)
- Tighten the pedals with the wrench!
Step 3
- Carefully, partially pull the computer out of its home casing.
- The battery compartment is on the back of the computer. Insert two AAA 1.5V battery on the back.
- Put the computer back into the case carefully.
Notes: If the display does not work properly, re-insert or replace the battery. When changing the battery, the counter is set to “0” “. Due to vibrations during transport, the counter is not at ‘0’, this is not a malfunction. If the display intensity becomes weak or difficult to read or only partially visible then the battery sould be changed.
CONSOLE INSTRUCTIONS
Display functions
Operation of the console
Note: This device generates a radio frequency for the transmission of data and meets all conformity requirements according to European standards. The design is such so as to provide reasonable protection against interference. Nevertheless, there may be overlaps and interactions with other household appliances. If this occurs, locate any transmitters and receivers that are in close proximity to the device and remove them from the immediate vicinity.
MAINTENANCE/CARE
Proper maintenance is very important to ensure that your equipment is always in top working condition. Improper maintenance could cause damage or shorten the life of your equipment and exceed the WARRANTY coverage. Important: Never use abrasives or solvents to clean the equipment. To prevent damage to the computer, keep liquids away and keep it out of direct sunlight. After each workout: Wipe off the console and other frame surfaces with a clean, water dampened soft cloth to remove excess perspiration. Inspect and tighten all parts of the equipment regularly. Replace any worn parts immediately.
For very high mileages, regular lubrication with a suitable grease is recommended.
APPLICATION SOFTWARE (APP)
You can download the app “Sportstech”/ “Synteam Sport” via the QR code shown here. Mobile device requirement: Android 4.3 or higher with Bluetooth 4.0, iOS 7.0 or higher. Please turn on your Bluetooth function and GPS on your device first.
https://play.google.com/store/apps/details?id=com.ztyd.otbhttps://apps.apple.com/de/app/%E6%99%BA%E5%A4%A9%E8%BF%90%E5%8A%A82-0/id1494664813
You can search for “Synteam Sport” in the app store or download it using the QR code.
Notes on using the App: You should only install apps from sources you trust. Sportstech Brands Holding cannot accept any liability for software provided by third parties.
Special access may be required to use this app. For this you might be asked by the app whether you want to install apps from this source. These authorizations can be deactivated again after the installation or the update!
You can set the app permissions at your own risk as follows: Settings> Apps> Special Access> Install Unknown Apps
Application: connection with the device
- When Synteam Sport logs on for the first time, the app asks what access you want to allow: media, voice recording, GPS, etc.
- At least location access should be enabled to connect to the device.
- “Change the language to ‘English’ if necessary.
- Click on ‘register’.
- Enter any number and password (the data does not have to be real)
- Confirm with ‘login’.
- Select the ‘Sport’ menu.
- Confirm with ‘Connect’
- To connect your device, select the “Pedometer” menu.
- The app scans the nearby devices.
- Your device should appear as follows: ” ZT smart Pedometer “.
- Select this device.
- Now you are in the training program. The measured steps are displayed as ‘Step’ and a comparable value for the distance covered in km.
- There is a gamepad icon in the top right hand corner that will take you to the ‘entertainment menu’.
STRETCH EXERCISE
DISPOSAL
Dear customers,
As an end user, you are legally obliged to collect waste electrical and
electronic equipment and batteries as well as accumulators separately from
municipal waste. We want to make this as easy as possible for you. Please note
the information on this page and on the back.
Notes on EU directive 2012/19/EU (in Germany implemented in ElektroG (Law
about electric and electronic devices); elsewhere implementation may differ)
We advise owners of electric and electronic equipment that waste electrical
and electronic equipment must be collected separately from municipal waste in
accordance with the applicable legal regulations. The symbol of a crossed-out
garbage can, which is shown on waste electrical and electronic equipment, also
indicates the obligation to collect this waste separately.
B. Notes on disposal and symbols for an electrical appliance based on EU
Directive 2006/66/ EU (in Germany in accordance with the Battery Act (BattG);
elsewhere, implementation may differ)
Old batteries and accumulators must not be disposed of with household waste.
As an end user, you are legally obliged to return used batteries. The symbol
with the crossed-out garbage can means that you are not allowed to dispose of
old batteries in the household waste. Use the official collection points for
this, such as the collection points of public waste disposal carriers. You can
also return used batteries to retail outlets, provided they sell batteries. If
the symbol Cd, Hg, or Pb is displayed under the symbol of the crossed-out
garbage can, this is an indication that the battery contains either cadmium,
mercury or lead. These are toxic heavy metals that not only pose significant
risks to the environment but also to human health.
Recycling loop
♻ Packaging material can be conveyed back to the raw material cycle. Dispose
of packaging material in accordance with legal provisions. Information can be
retrieved from the return or collections systems of your community.
DECLARATION OF CONFORMITY
Hereby Sportstech Brands Holding declares that the radio system type (Mini
Bike DFX50)
complies with the 2014/53/EU directive.
The full text of the EU Declaration of Conformity is available at the
following Internet address:
https://service.innovamaxx.de/dfx50_conformity
Distributed by Verkoop via Sportstech Brands Holding GmbH Potsdamer Platz 11
10785 Berlin
+49 30 220 663 520 www.sportstech.de
References
- Fitnessgeräte für Zuhause online bestellen | SPORTSTECH
- Entsorgung | SPORTSTECH
- service.innovamaxx.de/dfx50_conformity
- Tutorial & Support
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>