SUYOOVO XC3IN13 in 1 Wireless Charging Station User Guide
- June 3, 2024
- SUYOOVO
Table of Contents
SUYOOVO XC3IN13 in 1 Wireless Charging Station
Toensure you understand how to corectly use this device, please carefully read through this entire manual before using it. Keep this manual for future reference.
Product Overview
Charger Configurations
The charging modules can be combined into one ofthe folowing 2 configurations:
Indicator Light Guide
Note : Ifan abnormality is detected, please double- check the following things:
- Your charging adapter &cable are compatible with Quick Charge 3.0(QC 3.0) or Power Delivery (PD).A power output of less than 18Wwill result in abnormal charging,
- Your phone supports wireless charging, your phone case is not thickerthan 5mm, and your phone does not have any metal attachments on the back.
- After checking the above, unplug and re-plug the charging cable to resume normal charging
Important Reminders
- Please ensure your phone model supports wireless charging
- This charger is not compatible with phone cases thickerthan 5 mm.
- Metal attachments on the back of your phone will interfere with charging
- Pleaseensure that your AirPods charging case supports wireless charging.
- This charger is not compatible with AirPods case covers thicker than 4 mm.
Safety Information
- For your own safety, do not attempt to disassemble the product, expose it to an open flame, or submerge it in water.
- To avoid damaging the product, do not expose it to extremely hot, humid, or corrosive environments.
- If the product or any of its accessories have been damaged, stop using the product immediately.
- Do not expose the product to corrosive substances, as they will seriously damage the product and void the waranty.
- Please do not attempt to disassemble or modify the product in anyway, as it may cause serious damage and void the waranty.
- Please do not place the product in temperatures below 0PC[32°F) or above 60 “C(140°F).
FCC STATEMENT
This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions:
- This device may not cause harmful interference, and
- This device must accept any interference received, including interference that may cause undesired operation.
Warning : Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.
NOTE : This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help.
RF warning statement:
This equipment complies with FCC radiation exposure limits setforth for an
uncontrolled environment. This equipment should be installed and operated with
minimum distance 20cm between the radiator & your body.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>