RF VENUE 2 Channel Remote Antenna Kit Instructions
- June 3, 2024
- RF VENUE
Table of Contents
2 Channel Remote Antenna
Kit Instructions
2 Channel Remote Antenna Kit
Antennas can be mounted using the included pass-through adapter and wall
bracket or use the pass-through to mount the antenna to the front of your
rack.
-
Mount antennas using the provided bracket
a. Antennas should be positioned in an upright 45º angle (90º from each other), outside of the rack, and ideally in line of sight of the transmitters. The preferred height is 6-8 feet (2m). -
Connect antenna A to the antenna input port on the 2X1SPLIT using the provided coaxial cables
-
Connect outputs to Input A on both receivers
-
Connect antenna B to the antenna input port on the 2X1SPLIT
-
Connect outputs to Input B on both receivers
Kit Includes:
(2) 1/2 Wave Antennas, (2) 2X1SPLIT, (2) Wall brackets with screws, (2) BNC
pass-through adapters, (6) 24” BNC interconnect cables
Ranges:
- Low (470-530 MHz)
- Mid (500-570 MHz)
- High (530-608 MHz)
©2022 RF Venue
Documents / Resources
| RF
VENUE 2 Channel Remote Antenna
Kit
[pdf] Instructions
2 Channel Remote Antenna Kit, 2 Channel Antenna Kit, Remote Antenna Kit,
Remote Antenna, Antenna Kit, Antenna
---|---
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>