Down4Sound G01 40 WATT Portable Bluetooth Speaker User Manual

Down4Sound G01 40 WATT Portable Bluetooth Speaker User Manual

Dear customer,
Thank you for purchasing BASSBX G01.
To ensure correct operation, please read this user manual carefully before operation.

Important Safety Instructions

• Do not use the speaker in extremely cold and hot environments.
• Please avoid the speaker dropping or hitting with a hard object, it may cause other hardware damage. DO NOT EAT.
• Take care when charging the speaker, excessive prolonged charging will damage the battery lifetime. Charge the speaker to full capacity when using for the first time.
• When battery low, the indicator light will flash and voice prompt “battery low”, please charge speaker in time.
• If does not use this speaker for long time, please charge at least once within one month, in order to prevent the lithium battery from causing and damaging because of excessive consumption.
• Adjust the volume to appropriate level to avoid disturbing others, CRANKY people are out there stay safe..

Features

• Bluetooth Music and Mobile Hands-free Function
  Bluetooth 5.0 stereo music playing, support mobile hands-free function.

• MAXX AUDIO DSP by WAVES

• Aux-in
  Work as the external speaker by connecting to the audio source of computer, mobile, PSP/MP3/MP4 etc.

• Built-in EQ Modes
  With three audio effects for switch (Standard mode—Bass mode— Treble mode)

• Micro SD Card Music playing
  At MP3/WAV/WMA/FLAC/APE music format, capacity up to 32G

• Card Reader and Charging Function
  The card reader and charging functions can be achieved via the same USB cable.

• Power Bank

• Water-resistance at IPX4

• Voice guide
  The speaker will prompt the working mode and status for easy operation.

• TWS function
  True Wireless Stereo (two same speakers can in pair and play Bluetooth music at the same time)

Technical Data

• Drivers: (3 inch 4Ω Bass) x 2 + ( 1.37 inch 6Ω high frequency) x 2 + passive radiator x 2
• Output ：40W
• Power Input： DC 5V 2A
• Channel: 2.1
• Aux In ：3.5mm
• Built-in Battery 2200mAh x 4 (3.7V 8800 mAh)
• Size: 145×282.5×138 mm
• Charging Time: 5 hours with DC 5V 2A input
• Playing Time: 12 hours at 50% volume
• Net Weight: 1845 g

Package Contents

Bluetooth Speaker, Micro USB Cable, strap, User Manual

Slot and Keys

Instructions

2. Bluetooth Music

Please turn on the mobile or other devices’ music player, and speaker will play the selected music.

6. Aux in Mode
Use the 3.5mm audio cable included to connect the speaker to an audio source (PC, MP3/MP4, mobile phone). Short press the M button to enter “AUX IN” mode (the speaker will prompt “Aux in” mode). The speaker will play the music from the audio source.
Please Note:

• When the speaker connect to the PC via the Aux In cable to play music. We suggest to use the branded adaptor (5V 2A) instead of the PC USB Port to charge the speaker. As the computer’s power supply is week.
• Make sure the speaker is under Aux In mode when using this function.
• Short press the BRAND button, the music will be mute on the speaker. But the audio source is playing the music.

7. Card Reader
Inserting the Micro SD Card into the speaker and power off. Please use the USB cable included to connect the speaker to the computer.The speaker will enter the card reader mode, then the Micro SD card can be read and written on the computer directly.

Note:The first time using this function, computer will install the driver automatically.

8. TWS Function

1. Power on two BASSBX G01, ensure both speakers are waiting to pair.

2. Long press the Mode button on either speaker to enter the TWS
   pairing mode. The indicator light will flash in blue and green color alternately.

3. Once two speakers are paired, the speaker you pressed is the main speaker, whose indicator flashes in blue. The other one whose indicator lights in green is the slave speaker. The two speakers can play the same music in TWS mode after connected successfully.

4. Long press the M button on either one speaker to disconnect the TWS pairing.

5. Double short press the M button to clear the TWS pairing memory.

9. Intelligent power saving function
The speaker will be automatically powered off in below cases:

1. Under Bluetooth mode, the speaker is waiting to pair for more than 10 minutes
2. Under Memory card mode / Aux In mode, if press the down4sound button to pause/mute for more than 10 minutes.

Note:

1. Please use the good quality adaptor to charge the speaker.
2. We suggest to use the adaptor specification at 5V/2A
3. When speaker is with low battery capacity, please charge the speaker immediately
4. The speaker can be charged by different charging current, if using the computer to charge the speaker, as the current only at 500 mA, the charging time will be very long.

Troubleshooting

1. What should I do if the speaker can not pair with the Bluetooth device and play music accordingly?

1. Please check the specification/ the manual of the Bluetooth device (your mobile or computer), and check if the device can support the A2DP stereo audio transmission. If yes, please turn on the A2DP stereo mode.
2. Ensure the speaker at the Bluetooth status, if there are many bluetooth devices around you, it may be hard to scan, then please turn off other devices.

2. What should I do if the Micro SD card can not work?

1. Ensure that the Micro SD card is in good condition. Also check that the audio files are the correct formats – MP3/WMA/WAV/APE/FLAC.
2. Besides the above case, the problem maybe the compatibility of the Micro SD card.
   We recommend you formatting the Micro SD Card to FAT32 file formats.

3. What should I do if the speaker get stuck and all the button can not working.
The speaker’s inner system may be wrong with some inappropriate operation. Please try to long press BRAND the button and hold for 8 seconds to reset the speaker.

Read More About This Manual & Download PDF:

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>