V-TAC VT-7622PIR Outdoor Wall Lamp with Pir Sensor Instruction Manual
- June 3, 2024
- V TAC
Table of Contents
V-TAC VT-7622PIR Outdoor Wall Lamp with Pir Sensor Instruction Manual
INTRODUCTION & WARRANTY
Thank you for selecting and buying V-TAC product. V-TAC will serve you the best. Please read these instructions carefully before starting the installation and keep this manual handy for future reference. If you have any another query, please contact our dealer or local vendor from whom you have purchased the product. They are trained and ready to serve you at the best. The warranty is valid for 2 years from the date of purchase. The warranty does not apply to damage caused by incorrect installation or abnormal wear and tear. The company gives no warranty against damage to any surface due to incorrect removal and installation of the product. The products are suitable for 10-12 Hours Daily operation. Usage of product for 24 Hours a day would void the warranty. This product is warranted for manufacturing defects only.
IN CASE OF ANY QUERY/ISSUE WITH THE PRODUCT, PLEASE REACH OUT TO US AT: SUPPORT@V-TAC.EU FOR MORE PRODUCTS RANGE, INQUIRY PLEASE CONTACT OUR DISTRIBUTOR OR NEAREST DEALERS. V-TAC EUROPE LTD. BULGARIA, PLOVDIV 4000, BUL.L.KARAVELOW 9B
TECHNICAL DATA
- MODEL: VT-7622PIR
- RATED LOAD: Max 35Wx2
- BASE: GU10
- BODY TYPE: Stainless Steel
- SENSOR TYPE: PIR
- INPUR POWER: AC:220-240V, 50Hz
- DIMENSION: 110x67x220mm
- MOUNTING PLATE DIMENSION: 162x67mm
WARNING!
- Please make sure to turn off the power before starting the installation.
- Installation should only be done by a certified electrician.
This marking indicates that this product should not be disposed of with other household wastes.
Caution, risk of electric shock.
INSTALLATION DIAGRAM
INSTALLATION INSTRUCTION
- Drill two holes on the wall and insert two plastic expansion bolts in it.
- Fix the metal plate on the plastic expansion piece with self-tapping screws.
- Connect the supply leads with terminal.
- Open the lamp and install the bulb in the lamp
- Fix the lamp body on the plate and tighten the screws.
- Switch on and test.
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>