yeep me H30 LED Visor Helmet User Manual

yeep me H30 LED Visor Helme t User Manual

IMPORTANT!

NOTIFIED BODY:
CERTIFIED BY ALIENOR CERTIFICATION N° 2754 ZA DU SANITAL 21 RUE ALBERT EINSTEIN 86100 CHATELLERAULT FRANCE

PLEASE READ CAREFULLY BEFORE USING YOUR NEW HELMET

INFORMATIONS TO KEEP

Introductions

The Bicycle-Sports Safety Helmet you have just purchased provides protection, whether on or off the road. To insure proper use of this helmet, familiarize yourself with its features, fit and care by carefully reading through this manual before wear ing your new helmet.

Protection and Ventilation

The outershell allows the helmet to be rated one of the lightest helmets while providing excellent durability and integrity. The multiple vents with inner air channels draw the air through the helmet and over the brow for maximum cooling.

Pad Fitting

The helmet must fit properly to be effective. With a proper fit, the helmet will not move back and forth or side to side while fastened. If the helmet does not fit with installed pads, simply remove them and install a different size pad. To insure the proper fit, mix and match the pad thickness to best conform to your head shape.

Retention System

This Bicycle – Sports Safety Helmet uses a qcick-release buckle that is simple and can be buckled and unbuckled without changing the adjustmetn. The straps must be snugly and evenly tensioned. Place the helmet firmly on your head and fasten the buckle.

Notice which strap is loose. Tighten the loose strap after removing the helmet.

To tighten the chin strap, hold the buckle with one hand. Then pull the excess strap in through. (See Diagram A).

DIAGRAM A

To tighten the rear strap, pull excess from the rear of strap 2. Hold the helmet with one hand. With the other hand, hold the strap where they pass under your chin. Then pull from side to side to balance the length of all four straps.(See Diagram B)

The helmet must sit firmly and level on your head. (See Diagram C) To lower the front of the helmet to cover your forehead, tighten the chin strap and loosen the rear strap. To raise the front, loosen the chin strap and tighten the rear strap.

To check for proper tension, put on the helmet and fasten the buckle. Open your mouth. You should feel the strati nulling against your chin.

Then attempt to pull the helmet off the front or rear. If the helmet comes off, increase strap tension and examine if thick enough pads are being used. The helmet should not be able to roll forward or backward excel sively.It should not be possible to remove the helmet without unfastening the buckle.

NOTE: Please check adjustment every time this helmet is worn.

DIAGRAM B

DIAGRAM C

Final Check

The important thing to remember is that the hel-met fits snugly. If you can tilt it forward or back-ward you need to tighten the strap adjustment. The straps should be positioned that they do not cover the ears and that the buckle is away from the jaw when correctly fitted.
Buyer should always try different sizes and choose the size which feel secure and comfortable on the head.

It is important for the helmet to fit snugly on your head and must be fastened to provide maximum protection.

All adjustments should be checked each time the helmet is worn, making sure it fits snugly at all times.

Caring for Your Helmet

Clean the headgear with mild soap and water only. The use of any solvents, paints or decals can cause damage to the helmet and make it ineffective in the result of an accident.

Keep Helmet Out of Extreme Heat

Helmets will be damaged if exposed to tempera-tures exceeding 150°F.Dark vehicles and storage bags can exceed this on very hot days,Heat dam-aged helmets will have random disfigured areas where the texture appears bubbly and uneven. If damaged, helmets should be destroyed andreplaced immediately.

Important Information

This headgear is designed to absorb the energy of a blow by partial destruction or damage itself. Even hough such damage may not be visible, the helmet should be destroyed or replaced, if it is involved in an jujury- related fall. Unfortunately, some accidents result in head injury ‘hat cannot be pervented by ANY helmet. Depend-ng on the type of impact, even very low speeds can result in a serious head injury or fatality. Always ride with extreme caution and be sure to read this manual thoroughly.

Do not let children use this helmet as they climb or engage in activities inducing a risk of hanging in case they would stay on their helmets.
The helmet only protects if it is well fitted and it is appropriate for the buyer to try several sizes and choose the one that seems best fitted and most comfortable. The helmet should be adjusted so that the straps do not cover the ears, the buckle does not rest on the jaw and the straps and buckle must be adjusted to tighten firmly without obstructing. The helmet does not always provide protection against injury.

• Any helmet that has suffered a severe impact should be discarded and destroyed.
• Please note that any modification or removal of any of the original components of the helmet by a method other than that recommended by the manufacturer involves safety risks.
• Helmets should not be modified to attach accessories to them using a method that would not be recommended.
• Please find in diagram C, the way in which the helmet should rest on the head to provide the required protection, it is recommended to place it so that it protects the forehead and not to lower it too far back.

Maintenance and manipulation

Inner part and ear covers are removable and washable in machine at 30° in a net for washing.

Outer part :
Clean the helmet with soft cloth, mild soap and water only. The use of solvents, painting or stickers can damage the helmet and turn it ineffective in case or after an accident.

The ear covers are held by scratch and snaps. You have to open the snaps and push with caution the ear cover to detach it from its place. And do the reverse manipulation to reinsert it.

Rear red light

In order to make the integrated rear red light when driving, please take care to maintain the light visible and not hidden by a cloth, o hood or a scarf.

How to turn on/off the LED light on the helmet

Push the light directly (clic).
Several lighting modes are available. Please push the button several times on the light until you have the desired mode.

How to charge the battery of the LED light

Connect the cable (included) inside the light and inside a USB port of a charger (not included).
Lithium battery 3,7v 40mAh. Charging time 15min.
Operating time: 20 min (full light / mode 1) to 90 min. (differs depending on the selected mode )

H.30 VISION (model equipped with a visor)
The H.30 VISION are equipped with a pivoting visor to be used upon needs for instance rain or cold.
To maintain your visor, you have to use a soft cloth, and a liquid without any solvent and without alcohol. In case the visor is damaged with scratches or other which might affect your visibility and driving safely, please put is on upper position it or remove/change it.
Caution: The visor has no UV protection. It is only intended for comfort (protection from wind and rain).

Bicycle- Sports Helmets Warning

The Bicycle- Sports Safety Helmet is designed and intended exclusively for use while cycling, and other non -motorized sports. It is not intended for and will not provide adequate, safe protection if used during motorsport or moped use. No helmet can protect the wearer against all unforeseeable impacts. However, for maximum protection, the helmet must fit well and all retention straps must be securely fastened.

We advise the user to replace his helmet 5 years after the initial purchase.

EU déclaration of conformity and updated documents available on https://yeep.me or download.yeep.me

H.30 Vision
LED| S/M| 51-56 cm| 630g| 590g| 500g
L/)(L| 57-61 cm| 660g| _   620g| 520g

Manufacturer and consumer service:

References

• download.yeep.me
• yeep.me - Trottinette électrique urbaine pliable et vélo électrique pliant

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>