yeep me P88 Portable Electric Air Pump User Manual
- June 3, 2024
- yeep me
Table of Contents
Smart pump
Portable electric air pump
yeep.me P.88
User’s Manual
Please read this manual carefully before using this product for the first
time.
Original manual
PRODUCT OVERVIEW
(1). display
(2). Unit selected
(3). Light activation (120 lumens) / unit change| (4). + button
(5). Button –
(6). ON/OFF button
---|---
ACCESSOIRES
(1). Mattress / buoy tip
(2). Balloon needle
(3). Presta valve adapter
(4). Shrader valve
TECHNICALS INFORMATIONS
| Battery : | 2500mAh – 7.4V |
|---|---|
| Input ( charging ) / Power : | USB-C / 5V 1.5A |
| Output (powerbank) / Power : | USB-A / 5V 2A |
| Charging time : | 2,5 h env. (charger not included) |
| Noise level : | <60dB |
| Max. pressure : | 150 PSI / 10,34 bar |
| Lighting : | 120 lumens / 6 to 8h of autonomy* |
| Size : | 205 x 59 x 49 mm |
| Product weight : | 450 g |
| Working temperature : | From -10°C to 60°C |
| Materials : | ABS |
| Other equipment : | Presta valve adaptor*. |
Schrader valve adaptor Balloon needle Mattress / buoy tip Textile bag USB-A / USB-C cable
ADVICES FOR USE
- Tire pressure is based on the manufacturer’s recommendation, so be sure to always follow it.
- To ensure a long life for the inflator, let it stand for 10 minutes every 5 minutes to prevent overheating.
- Charge the inflator every 3 months to keep the battery in good condition.
- Make sure the battery is sufficient before using the inflator.
- During and just after inflation, the hose can be very hot. To avoid burns, please do not touch the hose immediately.
- This product is not a toy and should be kept out of the reach of children.
WARNING
Improper use can damage the inflator.
1. Do not leave the product in use.
- Avoid using accessories from other suppliers such as USB charger, car charger. It may cause fire and unpredictable damage.
- Please use the right charger, do not inflate when charging with the charger or USB adapter, it may burn the inflator or charger.
- Keep away from water. If there is water in the inflator, stop using it immediately. use immediately. Do not use in flammable and explosive areas. (e.g. gas station)
- Do not use for large vehicles such as trucks, heavy vehicles, heavy trailers, etc.
- Unplug the charger after fully charging.
- Keep the inflator out of reach of children.
- Do not disassemble the inflator yourself.
- Never suck or breathe in air from the inflator.
PRODUCT USE
Charging:
Connect the pump to power with the supplied USB cable.
After connecting the power supply, the battery charge icon is displayed on the
LCD: red: charging; green: fully charged.
Turn on/off :
Press and hold the power button for 2 seconds to turn the unit on.
Press the power button again for 2 seconds to turn off. The unit will
automatically shut off after 1 minute of inactivity.
Change of unit:
Briefly press button 3 to change the unit (PSI, BAR, KPA, kg/cm²).
Setting the pressure value :
+ : Press button 4 to increase the pressure value.
– + : Press button 5 to decrease the pressure value.
A long press on the “+” or “-” button allows you to quickly adjust the
pressure value.
The pressure value flashes 3 times, then is set to the selected value. You can
press button 3 to confirm the pressure value.
Connect the inflation tube :
Connect the pump to the air inlet of the object with the air inflation tube,
and tighten clockwise.
Start inflation :
Press the “power” button to start inflation, the real time pressure value is
shown on the display.
During operation, the compressor makes noise and after a long work, the
inflation tube will be hot.
Warning: Do not touch the inflation cable and connector during operation.
Stop inflation :
When the pressure reaches the set value, the pump’s compressor will stop
inflating and shut off. Briefly press the “power” button to stop the
compressor operation.
LED lighting :
Once turned on, press button 3 for 2 seconds to activate the LED light
function.
Press button 3 for 2 seconds again to activate the SOS LED function.
Press button 3 for 2 seconds again to turn off.
Pressure measurement:
Turn on and connect the pump to the object to be measured with the inflation
cable, the pressure value of the object will be displayed on the LCD screen of
the pump.
Powerbank function:
Connect the USB cable to USB port A, the output port (5V / 1A) for charging
other equipment as a power bank.
TYPES OF INFLATION
Tires on cars, motorcycles, electric bikes and most mountain bikes use a
Schrader valve.
To inflate: The air compressor can be connected directly to a Schrader
valve to begin inflation.
To deflate: Use an appropriate tool to press the pin inside the air valve
to release the air.
To inflate balls such as basketballs and soccer balls, you will need to use
the included needle valve adapter.
To inflate: Screw the Needle Valve Adapter onto the Schrader
Valve Adapter, then insert the needle into the ball valve to begin inflating.
To deflate: Insert the needle valve adapter into the ball valve and apply
slight pressure to the ball to release the air.
Road bikes and some mountain bikes use a Presta valve, which requires the use
of the included Presta valve adapter.
To inflate: Unscrew the Presta valve ring, attach the Presta valve adapter to
the air hose and connect the air compressor to the tire valve to begin
inflating. Once the tire is inflated, screw the valve ring back on.
To deflate: Unscrew the Presta valve ring and push down on the valve stem to
release air.
Manufacturer and consumer service :
CIBOX INTERACTIVE 17 AIlee Jean-Baptiste Preux 94140 Alfortville France
Made in China / PRC
Ref : YEEPO47 / Model : R88
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>