Surenoo STP0177G-128160 Series TFT Touch LCD Panel User Manual
- June 3, 2024
- Surenoo
Table of Contents
- Surenoo STP0177G-128160 Series TFT Touch LCD Panel
- General Description
- Mechanical Specification
- Mechanical Dimension
- Electrical Maximum Ratings
- Brightness characteristic & Power dissipation
- Module Function Description
- Response time & Contrast ratio
- Viewing Angle
- Reliability Trial
- Inspection standards
- LCD appearance defect(View area)
- Package Method
- References
- Read User Manual Online (PDF format)
- Download This Manual (PDF format)
Surenoo STP0177G-128160 Series TFT Touch LCD Panel
General Description
| MODEL NO | STP0177G- 128160 |
|---|---|
| Display Mode | **** Transmissive |
| Display Format | **** |
Graphic 128RGB*160 Dot-matrix 128xRGBx160
Input Data| 8080-8
Viewing Direction| 12 o’clock 12
Drive| ST7735S
Mechanical Specification
| Item | Specifications | Unit |
|---|---|---|
| Dimensional outline1 | 34.00(W)45.83(H)2.40MAX(T) |
34.00(W)45.83(H)3.65MAX(T)
| mm
Resolution| 128RGB160| dots
LCD Active area| 28.03 (W)35.04 (H)| mm
Pixel size| 0.219(W)*0.219(H)| mm
Mechanical Dimension
Electrical Maximum Ratings
| Item | Symbol | Min | Max | Unit | Note |
|---|---|---|---|---|---|
| Supply voltage （ VDDI ） | V | 1.8 | 3.3 | V |
–
Supply voltage （ VDD ）| V| 2.8| 3.3| V|
–
Operating temperature 工| T OPR| – 20| 70|
℃| –
Storage temperature| T STR| – 30| 80| ℃|
–
Brightness characteristic & Power dissipation
| Item | Symbol | Min | Typical | Max | Unit |
|---|---|---|---|---|---|
| LED module Forward voltage | V LED | 2 ． 9 | 3.1 | ||
| 3.3 | V | ||||
| LED module current | I LED | – | 18 | – | mA |
| LCD Surface Luminance | L S | 180 | 200 | – |
Cd/m 2
LCD Surface brightness uniform| L D| 80| –| –|
%
LCD power dissipation| P LCD| –| 0.11| –| W
Module Function Description
| PIN No. | Symbol | Description | Notes |
|---|---|---|---|
| 1 | LED-K | Cathode of Backlight | |
| 2 | LED-A | Anode of Backlight (2.9V-3.3V Typical:3.1V) | |
| 3 | GND | Ground | |
| 4 | VDD | Power Supply for LCD. | |
| 5-6 | NC | No connection | |
| 7 | CSX | Chip selection pin Low enable. High disable. | |
| 8 | RESX | -This signal will reset the device and it must be applied to properly |
initialize the chip.
-Signal is active low.
|
9| DCX| -Display data/command Selection Pin in MCU Interface. DCX=’1’: display
data or parameter. DCX=’0’: command data|
10| WRX| -Write enable in MCU parallel interface.|
11| RDX| -Read enable in 8080 MCU parallel interface.
-If not used, please fix this pin at VDDI or GND.
|
12-19| DB7-DB0| MCU parallel interface data bus.|
20| GND| Ground|
21| YU| Touch panel Logical foot|
---|---|---|---
22| XL| Touch panel Logical foot|
23| YD| Touch panel Logical foot|
24| XR| Touch panel Logical foot|
Response time & Contrast ratio
| Item | Symbol | Condition | Remark | Unit |
|---|---|---|---|---|
| Min. | Typ. | Max. | ||
| Response time | Tr+Tf | θ=0° | – | 30 |
| Contrast ratio | CR | θ=0° | 200 | 300 |
Viewing Angle
| Item | Symbol | Condition | Remark | Unit |
|---|---|---|---|---|
| Min. | Typ. | Max. |
Viewing angle
| Top| CR≥10| 30| 40| –| ****
Deg.
Bottom| CR≥10| 40| 50| –
Left| CR≥10| 40| 50| –
Right| CR≥10| 40| 50| –
Reliability Trial
| NO. | ITEM | CONDITION | CRITERION |
|---|---|---|---|
| 1 | High Temperature Non-Operating Test | 80℃*120Hrs | No Defect Of |
| Operational | |||
| 2 | Low Temperature Non-Operating Test | -30℃*120Hrs | Function In Room |
| Temperature Are | |||
| 3 | High Temperature/Humidity Non Operating Test | 60℃90%RH120Hrs | Allowable |
| 4 | High Temperature Operating Test | 70℃*72Hrs | |
| 5 | Low Temperature Operating Test | -20℃*72Hrs | |
| 6 | Thermal Shock Test | -20 ℃ (30Min) n70 ℃ |
Inspection standards
Glass defect
LCD appearance defect(View area)
Package Method
Shenzhen Surenoo Technology Co.,Ltd.
www.surenoo.com
Skype: Surenoo365
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>