Surenoo STP0177C-128160 Series TFT LCD Panel User Manual
- June 3, 2024
- Surenoo
Table of Contents
- Surenoo STP0177C-128160 Series TFT LCD Panel
- General Description
- Mechanical Specification
- Mechanical Dimension
- Electrical Maximum Ratings
- Backlight Characteristic
- Module Function Description
- Viewing Angle
- Inspection standards
- Package Method
- References
- Read User Manual Online (PDF format)
- Download This Manual (PDF format)
Surenoo STP0177C-128160 Series TFT LCD Panel
Model No.: STP0177C-128160
Shenzhen Surenoo Technology Co.,Ltd.
Skype : Surenoo365
www.surenoo.com
General Description
MODEL NO
| STP0177C-128160
---|---
Display Mode
| ****
Transmissive
Display Format
| ****
Graphic 128RGB*160 Dot-matrix 128xRGBx160
Input Data
| ****
SPI-4wire interface
Viewing Direction
| ****
12 o’clock 12
Drive
| ****
ST7735S
Mechanical Specification
| Item | Specifications | Unit |
|---|
Dimensional outline
| 33.30(W)42.94(H)2.30+/-0.1(T)
(FPC not include)
| mm
Resolution
| 128RGB*160| dots
LCD Active area
| 28.03 (W)*35.04 (H)| mm
Pixel size
| 0.219(W)*0.219(H)| mm
Mechanical Dimension
Electrical Maximum Ratings
Item
| Symbol
| Min
| Max
| Unit
| Note
---|---|---|---|---|---
Supply voltage （ IOVCC ）
| V| 1.65| 3.3| V| ****
1.8
Supply voltage （ VCC ）
| V| 2.5| 3.5| V| 2.8
Operating temperature 工
| T OPR| -20| 70| ℃|
Storage temperature
| T STR| -30| 80| ℃|
Backlight Characteristic
Item
| Symbol
| Min
| Typical
| Max
| Unit
---|---|---|---|---|---
LED module Forward voltage
| V LED| 3 ． 0| 3.3| 3.4| V
LED module current
| I LED| –| 30| –| mA
LCD Surface Luminance
| L S| 150| 200| –| Cd/m2
LCM Surface brightness uniform
| L D| 80| –| –| %
Module Function Description
|
---|---
1| LED-K
2| LED-A
3| VCC
4| TE
5| CS
6| RESET
7| DC
8| SCL
9| SDA
10| GND
TFT-LCD
| | | | |
---|---|---|---|---|---
VCC| —| 2.5| 2.8| 3.5| V
IOVCC| —| 1.65| 1.8| 3.3| V
VIH|
IOVCC=1.8-3.3V
| 0.8 VIOVCC| —| IOVCC| V
VIL| VSSI| —| 0.2 VIOVCC| V
IDD|
VCC=2.8V
| |
TBD
| |
mA
| | | | |
---|---|---|---|---|---
IF| VF=3.2V| —| 30| 40| mA
VF|
IF=15mA
| 3.0| —| 3.4| V
Lv| —| —| —| cd/m2
ΔBp| 80| —| —| %
Response time &Contrast ratio
Item
| Symbol| Condition| Remark| Unit
---|---|---|---|---
Min.
| Typ.
| Max.
Response time
| Tr+Tf| θ=0°| –| 30| 60| ms
Contrast ratio
| CR| θ=0°| 200| 300| –|
Viewing Angle
| Item | Symbol | Condition | Remark | Unit |
|---|
Min.
| Typ.
| Max.
Viewing angle
| Top
| CR≥10
| 20| 30| –| ****
Deg.
Bottom
| CR≥10
| 40| 45| –
Left
| CR≥10
| 40| 45| –
Right
| CR≥10
| 40| 45| –
Reliability Trial
NO.
| ITEM
| CONDITION
| CRITERION
---|---|---|---
1| High Temperature Non-Operating Test| 80℃120Hrs| No Defect Of
| Operational
2| Low Temperature Non-Operating Test| -30℃120Hrs| Function In Room
| Temperature Are
3| High Temperature/Humidity Non Operating Test| 60℃90%RH120Hrs| Allowable
|
4| High Temperature Operating Test| 70℃72Hrs|
|
5| Low Temperature Operating Test| -20℃72Hrs|
|
6| Thermal Shock Test| -20 ℃ (30Min) n 70 ℃|
| (30Min) *10CYCLES|
Inspection standards
Glass defect
| NO | Defect item | Criteria | Remark |
|---|
1
| Dimension Unconformity
(Major defect)
| By Engineering Drawing|
2
| Cracks
(Major defect)
| 1. Linear cracks panel
【Reject】
2. Nonlinear crack contrast by limited sample
| ****
3
| Glass extrude the conductive area
(minor defect)
| a: disregards and no influence assemblage.
1) b≤1/3Pin width(non bonding area)
【Accept】
- bonding area≤0.5mm
【Accept】
| A: Length, b: Width
4
| Pin-side ,conductive area damaged
(minor defect)
| (a c: disregards)
b≤1/3of effective length for bonding electrode
【Accept】
| a: length, b: Width, c: Thickness
5| Pin-side,non-conductive
area damaged
| 1)Damage area don’t touch the ITO
(Inclueling contraposition mark,
| a: Length, b: Width c: Thickness
| (minor defect)| except scribing mark)
【Accept】
- C<T b≦BM1/3of width
【Accept】
- c=T
b not touch the seal glue
【Accept】
- a disregards
| ****
---|---|---|---
6
| Non-pin-side damage
(minor defect)
| c<T
1)b exceeds 1/3Bm
【Reject】
c=T
b not touch the seal glue
【Reject】
| c: Thickness b: width of
damage
LCD appearance defect(View area)
| NO | Defect item | Criteria | Remark |
|---|
1
| ****
Fiber、glass cratch、polarizer scratch/folded
(minor defect)
| Specification| Allowable| note1:L: Length, W: Width note2: disregard if out of AA ****
W≦0.03mm| disregard
0.03mm<W≦0.05mm;L≦3.0mm| 2
0.05mm<W≦0.1mm;L≦3.0mm| 1
W>0.1mm;L>3.0mm| 0
2
| Polarizer bubble、 concave and convex(minor defect)| φ≦0.2mm| disregard| note1: φ=(L+W)/2,L:Length,W :Width
note2:disregard if out of AA
0.2mm<φ≦0.3mm| 2
0.3mm<φ≦0.5mm| 1
0.5mm<φ| 0
3
| **** Black dots、dirty dots、 impurities、eye winker
(minor defect)
| φ≦0.15mm| disregard| note2:disregard if out of AA ****
0.15mm <φ≦0.25mm| 2
0.25mm<φ≦0.3mm| 1
0.3mm<φ| 0
4
| **** Polarizer prick
(minor defect)
| φ≦0.1mm| disregard| note1: φ=(L+W)/2,L=Length,W=Width
note2:the distance between two dots>5mm
0.1mm<φ≦0.25mm| 3
φ>0.25mm| 0
Package Method
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>