Kingwo MT35 Personal and Asset Tracker User Manual

June 3, 2024
Kingwo

Kingwo MT35 Personal and Asset Tracker

Kingwo-MT35-Personal and-Asset-Tracker-PRODUCT

Declaration

The contents of this manual will be updated from time to time without prior notice; the updated content will be added to the new version of this manual. KINGWOOD will improve or update the products or procedures described in the manual at any time. If there is a description of the product in the manual that does not match the actual product, the actual product shall prevail. KINGWOOD has the final interpretation rights of this manual.

Product Overview

  • Rechargeable ultra-long standby position and monitor terminal
  • built in with 2900mah industrial grade rechargeable polymer lithium battery
  • Built in High-sensitivity G-sensor, suppress the static drift and automatically switch the working mode.
  • Built in temperature sensor
  • Support quick charge
  • Supports OTA upgrading, reduce maintenance on site
  • History playback, Blind data storage, Cornering compensation
  • Supports 2 guardian numbers to remote monitoring and receiving alarms
  • IP68 rated

About the product

Kingwo-MT35-Personal and-Asset-Tracker-
FIG-2 Kingwo-MT35-Personal and-Asset-Tracker-
FIG-3Kingwo-MT35-Personal and-Asset-Tracker-
FIG-4

Technical Specification

【Main unit】

Characteristics Description
Battery Polymer lithium battery,Capacity 3.7V/2900mAH;
Working current Average current <60mA@3.7V;
Sleep current <2mA@3.7V
Recharge Micro-USB port charge, support quick charge

Communication

| 2G:GSM/GPRS      850/900/1800/1900MHz
GPS| Support GPS, AGPS and LBS
WIFI| Built in WIFI chip,Support WIFI function
Antenna type| Built in GSM ,GPS and Wifi antenna,
SOS| Support SOS function for emergency alarm
---|---
Temperature

sensor

| Built in temperature sensor, to detect environmental temperature
---|---
LED Indicator| GSM, GPS, battery
Remote upgrade

(FOTA)

| Support remote configuration and firmware upgrade
Wake up| Built G-sensor, to detect the device is in static or motion status
Multiple IP| Support multiple IPs connecting at same time
Working time| Working:30 seconds

Standby :10 minutes

Dimension| 85mm51mm20mm
Environment| Working temperature:-20℃~70℃;

Storage temperature:-40℃~+85℃;

IP rating| IP67

Functions

Tracking
Including fixed upload, blind zone compensation, speed mileage statistics, Geo-fencing and other functions, the backend sends positioning commands, and the device returns data including longitude, latitude, speed, direction, and status information.

Fixed upload
The device can be configured to upload the vehicle location, status info to the backend at a certain time or at a certain period or according to certain time interval
Blind spot data storage
When the device enters the GPRS blind zone, the trace data will be saved at the shortest interval which is 15s, and the blind zone data will be uploaded to the platform when the GPRS is back online. The blind zone compensation data can be saved up to 1,000 packets
Cornering compensation
When it uses as an asset tracker, when it enters the curve lane, the terminal detects that the driving direction has a certain angular deviation (default 20 degrees), and a timing upload message is added to ensure that the driving track is more accurate.
Multiple position method
Device can be positioned via BD/GPS/AGPS/LBS/WIFI 5, and the device would select the position way according to signal strength for fast position, meanwhile increase the position accuracy.
Built in antenna
Device has built in antennas, including quad band GSM antenna, BD, GPS, 2.4G wifi antenna.
Push to call
Device has SOS emergency button, push to call or send emergency alarm

Temperature sensor
The device has built in temperature to detect the environment temperature and send to backend to analyze
Built in battery
The device is with built in lithium battery, it can real time upload the battery level status, and there are 4 indicators on the device to indicate the battery level status for remotely monitor the battery status
Quick charge function
The device has quick charge function, it supports V/2A or 5V/1A power adaptor and charge via Micro-USB interface
Power save mode
Device has built in motion sensor to detect whether the device is in motion and static mode, when the device in a static mode for a certain time, it will automatically enter into power save mode, and only send heartbeat packet, when the g-sensor detects a motion, the device will exit power save mode and enter into normal working status
Voice function
The device has built in waterproof microphone and speaker for dual communication or one way communication
Remote setting
The device parameters, including IP, center number and other parameters can be configured remotely

(FOTA)
As long as GPRS is available, the new firmware can be upgraded remotely
Multiple IPs connection
The device supports dual IPs,it can be connected to main server and backup servers
IP rated
The device is IP67 rated, including SIM card slot, buttons, USB interface, speakers and microphone for better waterproof and dusty proof
Installation and debugging process
SIM installation
Open the top cover of the terminal, insert the prepared SIM card into the SIM card holder, and then confirm that the SIM card button is well placed . Please make sure that the SIM card has the GPRS function available in advance and write down the SIM card number.n.
Parameters setting
TCP/UDP connection mode setting
For example, the client’s server IP is: 119.145.40.64, port number: 8881. If it is connected by TCP, use SMS to edit: 88111914504006488811#; if it is UDP connection, edit: 88111914504006488810#. The terminal will reply: set ok, the setting is successful.

Important Parameter Setting

  • Upload interval setting
  • Command format: HC, , #
  • Command Description: T1: Start upload interval, the value range is 5-300 seconds, the default is 15 seconds.
  • T2: Sleep interval, ranging from 300 to 1800 seconds, defaulting to 600 seconds. For example: HC, 30, 300# Set the data upload time to 30 seconds and the sleep upload time to 300 seconds.
  • Position mode
  • Command format: LBS, A#
  • Command description
  • A=2 close positioning function; A=1 pure base station positioning mode; A=0 base station positioning, GPS positioning, AGPS; default A=0
  • Example: LBS, 1# Enter pure base station positioning mode, turn off GPS module

APN,apn,user,pswd#| Set APN, User name and password

For example: APN,CMNET,internet,internet# Explanation:

APN:CMNET

Username: internet Password: internet APN,CMNET#

Explanation:

APN:CMNET

User name: Null Password:Null

---|---
IP,ip or dns,port,type#| Set IP, port and communication type of primary server

IP,119.23.233.52,6000,1#

Set the primary server IP:119.23.233.52,port 6000,communication type:TCP

 | IP,www.365qczx.com,6000,0#

Set the primary server domain:www.365qczx.com,Port 6000, communication type UDP

---|---

IP2,ip or dns,port,type#

| Set IP, port and communication type of backup server

IP2,119.23.233.52,6000,1#

Set the backend server IP:119.23.233.52,port 6000,communication type is TCP

IP2,www.365qczx.com,6000,0#

Set the backend server domain:www.365qczx.com,port 6000, communication type: UDP

IP2,,0,0#     Delete backend server parameter

HC,,,#

| Set the upload interval in real time tracking mode:

T1: upload interval in ignition on status, range,5-300s ,default 120s T2: Upload interval in ignition off status

,range 5-300 s, default 120 s

T3:Sleep return interval, range 10-1800 s, default 180 For example:

HC,30,90#       Set the upload interval as 30s in ignition on and 90s in

ignition off

HC,30,90,300#      Set the upload interval as 30s, 90 s in ignition off and 300s while in sleep mode

UTC,TTTT#

| Set time zone:

unit minutes, default UTC+8:00 For example:

UTC,480# Time zone UTC+8:00 UTC,330# Time zone UTC+5:30 UTC,-480# Time zone UTC-8:00 UTC,-210#  Time zone UTC-3:30

WY,[,R,M]#

| Set towing alarm:

A: On and off,1:On                                   0:Off Default is off

R: Towing radius,Default 500 meters,Range:100-2000 meters M: Alarm mode,Optional

M=0:GPRS,M=1:SMS+GPRS

Eg:WY,1,100,1#       towing alarm on,radius 100 meters notification mode:GPRS+SMS

LEVEL,S#

| Set Vibration sensitivity :

S: Sensitivity     1/2/3/4/5 indicates, highest/high/middle/low/lowest LEVEL,1# Sensivity: Higest

LEVEL#       Query

ZD, < A>[,M]#

| Set vibration alarm:

A=1:Vibration alarm ON     A=0:Vibration alarm off         Default is off M: Alarm mode,M=0 Only GPRS,M=1:SMS+GPRS

Example:

ZD,1,1#,       Vibration alarm ON, notification mode: GPRS+SMS ZD,0# Vibration Alarm Off

ZD#

---|---

XM, tttt #

| Set enter sleep mode time while in static status:

Default is 5 minutes

XM,5#       Sleep after 5 mins without vibration XM,0#       Disable sleep mode function

XM#           Query

Query IMEI/ICCID/IMSI

| IMEI# ICCID#
Set blind data storage ON and Off,A=1 Off;A=0 , Default ON|

BLIND,1#       Turn off blind data storage function BLIND#           Query

446DDDDD#| Set initial mileage:

Unit KM, range 0-999999km

4461000#,Initial mileage is :1000Km

SPEED,V,T#

| Set speeding threshold and duration time

V: Speeding threshold:0-255km/h,0 is disable speeding alarm T:Duration time, value range >=5 seconds, default is 5 seconds: Example:

SPEED,50,5# Speed threshold is 50km/h,duration time: 5 seconds SPEED# Query

UPGRADE,IP/domain,port, version# OTA,IP/domain,port,versio n#

|

OTA command: UPGRADE,119.23.233.52,7771,MT02S-4.12# OTA,www.365qczx.com,7771,MT02S-4.12#

UPGRADE,0#     Exit upgrade UPGRADE#         Query upgrade status

25#

| Query OTA Status:

eg:192.168.1.1:8000,T;T8G-1.5;Wireless upgrade request succeed ,downloading data now!

LBS,A#

| Set LBS ON and OFF :

,A=1 ON ;A=0 OFF,Default is off Example:

LBS,1#    LBS ON LBS,0#       LBS OFF

LBS#           Query

---|---
770number#| Set center No.1
772 number#| Set center No.2
111#| Query center No.
113#| Query longitude and latitude

114#

| Query device status Eg:

Online: IP1 CMNET,119.23.233.52:6000,T ID: 80222001633,id GPS=A,5;GSM=20 MT02S-4.12.128.10 2019-08-06

221#| Restore to factory setting
224#| Reboot device

usage requirements
The terminal is strictly forbidden to use according to the operating instructions ,disassemble, collide, charge, soak, over 80 °C, human failure, force majeure damage, etc. may cause short circuit, insufficient working time, battery deformation, liquid leakage, explosion, no warranty and compensation will be provided by KINGWO.

Contact us

Documents / Resources

| Kingwo MT35 Personal and Asset Tracker [pdf] User Manual
MT35 Personal and Asset Tracker, MT35, MT35 Tracker, Personal and Asset Tracker, Asset Tracker, Personal Tracker, Tracker
---|---

References

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>

Related Manuals