Kingwo NT53E Rechargeable Asset GPS Tracker Owner’s Manual

Kingwo NT53E Rechargeable Asset GPS Tracker

Product Information

Application Scenario

• Rental cars
• Asset tracking
• Fleet management
• Logistics

Specification

B1/B2/B3/B4/B5/B8/B12/B13/B14/B18/B19/B20/B25/B26*/B27/B28/B66/B85
protocol: Embedded TCP/IP stack Sensitivity: -107dBm@850/900MHz
-106dBm@1800/1900MHz Output power: Class 4 (2W)@850/900MHz Class 1
(1W)@1800/1900MHz
GPS| Processor Motion sensor Wifi position Bluetooth
---|---
Channels: 50 Sensitivity: -147dBm Position accuracy:5-10m
Accuracy: 5m CEP Cold start

Product Usage Instructions

1. Charging the Device

Before first use, ensure the device is fully charged using the provided charger.

2. Powering On/Off

To power on/off the device, press and hold the power button for a few seconds.

3. Bluetooth Pairing

To pair with Bluetooth devices, activate Bluetooth on the tracker and search for available devices on your smartphone or other compatible devices.

4. Asset Tracking

Place the tracker on the asset to be tracked and ensure it has a clear view of the sky for accurate GPS positioning.

Frequently Asked Questions

• Q: How long does the battery last on a full charge?
  • A: The device features a 5200mAh rechargeable battery that can last up to X hours on a full charge, depending on usage.
• Q: Can I track multiple assets simultaneously with this tracker?
  • A: Yes, the tracker supports simultaneous tracking of multiple assets, providing real-time location updates for each.

Feature

• Waterproof
  • 1P67
• Rechargable battery
  • 5200 mAh
• BG95 Cat-m&NB-loT network
• BLE ibeacon and gateway
• Strong magnetic easy installation
• Real-time tracking
• Tamper Alarm
• Motion detection
• Temperature monitor

https://www.kingwoiot.com

Application Scenario

Specification

NT53E is an ultra-rugged asset GPS Tracker with 5200Mah rechargeable battery based on CatM1 and NBIOT technology, it has built in Bluetooth, motion sensor, temperature sensor and light sensor. It’s ideally suitable for Asset tracking market.

Physical

Cellular

Cat M1: LTE-

FDD B1/B2/B3/B4/B5/B8/B12/B13/B14/B18/B19/B20/B25/B26*/B27/B28/B66/B85

protocol: Embedded TCP/IP stack Sensitivity:  -107dBm@850/900MHz

-106dBm@1800/1900MHz

Output power: Class 4 (2W)@850/900MHz Class 1 (1W)@1800/1900MHz

GPS

GPS| Channels: 50 Sensitivity: -147dBm

Position accuracy:5-10m Accuracy: 5m CEP

Cold start: <27s Hot start: <1s

---|---
Processor| ST
Motion sensor| DA260
Wifi position| Wifi 5.0
Bluetooth| Bluetooth 5.1

Power

Battery| Rechargeable Lithium-ion battery and （3.7V，5200mAh）

and ultra-low discharge rate：less than 1%, store one year below 25℃

---|---
Power consumption| Average working current <100mA; Power save current 7uA;
GSM antenna| Internal High Gain
GPS antenna| Internal High Gain
SIM| Microsim
Indicator| 3 status LEDs, Green: GPS, Battery level: Blue: Red: Celluar

Environmental Parameter

Contact Us

Shenzhen Kingwo IoT Ltd,.

Hi-tech Park, North Science Park, Nanshan District, Shenzhen , China 518052
Website:| Official website: https://www.kingwoiot.com        Alibaba: https://kingwoiot.en.alibaba.com

FCC Statement

This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions:

1. this device may not cause harmful interference, and
2. this device must accept any interference received, including interference that may cause undesired operation.

Any changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.

NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and the receiver.
• Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help.

To maintain compliance with FCC’s RF Exposure guidelines, This equipment should be installed and operated with a minimum 20cm distance between the radiator and your body: Use only the supplied antenna

References

• Shenzhen Kingwo Iot Ltd. - Asset Tracker, Vehicle Tracker
• Kingwo IoT - GPS Tracker-GPS Tracking Devices-GPS Tracker for Car|Kingwo Iot

Read User Manual Online (PDF format)

Download This Manual (PDF format)

Download this manual  >>