niko 353-600111 Motion Detector Instruction Manual
- June 4, 2024
- niko
Table of Contents
353-600111 Motion Detector
Instruction Manual
4 Year warranty
Motion detector M42MR, 230 V, master, 12-13 m, 360°, for flush-mounting box
Wiring
230 V – OFF
- Remove if you want to use the contact as a dry contact (potential-free).
This product must be secured with a miniature circuit breaker (MCB) of max. 16 A in the electrical cabinet, limited by national installation rules.
Dimensions
Installation
230 V – OFF
App settings
| | |
---|---|---|---
Factory settings| Switch ON/OFF| 500 lux| 15 min
LED behavior
230 V – OFF
Green LED continuously on| | Connection OK|
---|---|---|---
Green LED breathing| | Connection OK, overrule ON|
Green LED flashing| | Warming up| Wait
Red LED continuously on| | Error| More info –>
detector tool
Red LED breathing| | Warning
Blue LED flashing| | Walk test active
Specifications
Article number Configuration | 353-600111 |
---|---|
Input voltage | 230 V Master |
Maximum power consumption | 230 Vac ± 10 %, 50 Hz |
Circuit breaker (*) | 0.2 W |
Relay contact | maximum MCB rating C16 |
Maximum load incandescent and halogen lamps (cosφ = 1) | NO (max. µ10 A), |
potential-free
Maximum load fluorescent lamps (cosφ ≥ 0.5)| 2300 W
Maximum load economy lamps (CFLi)| 1200 VA
Maximum load LED lamps 230 V| 350 W
Maximum load LED driver| 350 W
Maximum load electronic transformer| 500 VA
Maximum capacitive load| 500 VA
Maximum switching current| 140 µF
Light intensity range| 165 A/20 ms or 800 A/200 µs
Number of channels| 20 – 2000 lux, ∞
Switch-off delay| 1 channel
Hysteresis on light intensity| pulse, 15 s – 120 min, ∞
Detection angle| 10%
Detection range (PIR)| 360°
Ambient temperature| Ø 12 m from a height of 3 m
Mounting method| -25 – +40 °C
Mounting height| flush-mounting box
Colour| 2 – 3.5 m
Dimensions visible (HxWxD)| white (RAL 9010)
Dimensions (HxWxD)| 100 x 100 x 9.5 mm
Wire capacity| 100 x 100 x 44.5 mm
Maximum range Bluetooth® (free field, depending on the device)| 1.5/2.5 mm²
Operating frequency| 50 m
Maximum radio frequency power| 2.4 GHz
Protection degree| -2 dBm
Impact resistance| IP20
Modification of settings| IK02
Halogen-free| app (iOS/Android) and 2-way Bluetooth® communication
Marking| yes
Detection area
Troubleshooting
Problem | Possible cause | Proposed solution |
---|---|---|
Load does not turn on | The wiring is not correct | Check the wiring scheme |
The ambient light is too strong | Check the response value luminosity and raise |
the value if necessary
Load does not turn off| The switch-off delay is too long| Check the switch-off
delay and shorten the delay if necessary
The detector receives false triggers| Check for any objects that may cause
false triggering and remove them from the detection range or lower the
sensitivity
The app cannot connect to
the detector| Bluetooth® has been disabled on your mobile device| Enable
Bluetooth® on your mobile device
Support & contact
nv Niko sa
Industriepark West 40
9100 Sint-Niklaas, Belgium
www.niko.eu
+32 3 778 90 80
support@niko.eu