blaidsX Pro Hearing Aids User Guide

blaidsX Pro Hearing Aids

• Scan QR code below to access our detailed usage manual
• Scan QR code below to download our app

BlaidsX pro

INSERTING THE BATTERY

1. Your hearing aids use standard size 312 batteries available at any pharmacy or supermarket.
2. Remove the sticker found on the positive side of your 312 batteries
3. The battery compartment is found at the bottom of the hearing aid. Gently pull on the tab found on the battery door. Insert the battery with positive (flat) side face up. Don’t worry our intelligent design ensures that battery gets correctly inserted every ti me.
4. Gently close the battery compartment. A click sound ensures that the battery compartment has been secured properly.

POWERING OFF YOUR HEARING AIDS

1. You can power off your hearing aids by simply opening the battery compartment .

DISTINGUISHING BETWEEN THE LEFT AND RIGHT EAR HEARING AID
To easily distinguish between your left and right hearing aid, the size (2B, 3B) of the slim tube is printed in color on the base of this slim tube. Red is for the right ear, and blue is for the left ear. Please note that 3B tubes are slightly longer than 2B tubes.

CHANGING THE SLIM TUBE TO YOUR HEARING AID
To change your tube, gently unscrew the preassembled tube in a counterclockwise direction. Thereafter, put on the new slim tube.

REMOVING AND ATTACHING YOUR DOME TO THE SLIM TUBE
Each Blaids hearing aid comes with 5 different sizes of hearing domes to help you achieve the perfect fit. To attach the hearing dome to the tube, hold the dome from the center and push firmly to ensure that hearing tube is completely inside the hearing dome. To remove the hearing dome, hold the hearing dome from the centre and pull firmly.

Tip: If you are experiencing feedback, try using the 11 mm or the 13 mm domes as shown below for a snug fit

POSITIONING THE HEARING AID ON YOUR EAR

1. Place the body of your hearing a id behind your ear.
2. Ensure that the dome faces towards the entrance of the ear canal. Gently press the dome into your ear canal until the slim tube sits comfortably and flat against the side of your head.
3. Place the retention wire in the bowl of your ear to ensure that your hearing aid remains in place.

MAINTAINING YOUR HEARING AIDS

REGULAR CLEANING
Blaids hearing aids are accompanied with a cleaning brush and a cleaning pipe. You can use the brush to periodically clean your hearing aids. You should regularly use the cleaning pipe to clean hearing tube and keep it free from any kind of dust, wax or small debris.

PROTECTION FROM WATER
Blaids hearing aids are sweat proof and designed for an active lifestyle. It is advised not to soak or submerge the hearing aids in water.

REPLACE BATTERIES REGULARLY

Under normal circumstances, each battery can last 6-7 days. Always keep spare batteries in your hearing aid box and remember to replace the battery regularly. Mobile Application Usage Guide

Scan QR code below to download our app

Introduction to Bluetooth Connection

Users can implement volume adjustment, program switching, hearing test and smart fitting functions through the mobile app.Download the app from apple app store or from GooglePlay by searching for the name “Acosound”.

Connecting Your Hearing Aids

1. Turn on Bluetooth
2. Pull down your screen to refresh and find your hearing aids

Ensure that a fresh battery is inserted prior to connecting your hearing aids

If you have trouble connecting your hearing aids, quit the application, go to your phone settings, turn Bluetooth OFF and ON again and restart application. If the problem persists, please contact our customer support at (202) 932 6636 or email us at support@blaidshearing.com

• Make sure the selected hearing aid is reflecting your side of wearing. Match the serial number printed on the body of hearing aid with the number displayed on screen.

Application Description

How to use your 4 pre-set modes

Our audiology team has pre-programmed 4 custom modes for your convenience. Each of the custom modes can be easily updated by you to suit your needs as shown in the subsequent pages

• Li1 Everyday Use – Suitable for most listening situations. Ideal for one-on-one conversations, going to meetings or to church, watching the television or listening to the radio.
•   outdoor – Suitable for traffic or situations where you need to be aware of some background sounds for safety but do not want to be too bothered by unnecessary noise.
• Indoor Suitable for most noisy environments. Ideal for smaller groups, large rooms, restaurants, listening t people in a car, cinema etc.
• mil Music/TV Suitable for listening to music in situations where there is not too much background noise. The quality may be different depending on the music source

How to take hearing test and upload your audiogram

Smart Fitting Instructions

Fine Tuning is a normal and necessary process for all hearing aids. Now that you have taken your hearing test, our Smart Fitting options will help you fine tune the hearing aids to achieve a sound quality that is comfortable for you.

Advanced Setting Instructions

If you’ve utilized the Smart Fitting settings and still feel the need for further adjustment, you may also wont to explore our Advanced Settings.

• Soft Voice Enhancement – Use this setting if you are in o meeting or watching TV and notice that you con hear external sounds fine but certain people’s voices ore difficult to hear.
• Loud Voice Suppression – Use this setting in case certain noises such as doors shutting or cars passing by ore louder than you would prefer.

MANAGING HEARING AID FEEDBACK NOISE

Here are the most common reasons for feedback and how to resolve it.

Tips in case you experience Feedback:
Hearing aid feedback occurs when sound that was supposed to go into your ear canal leaves your ear and jumps back into the hearing aid microphone. The sound then gets re amplified, and this causes your hearing aids to whistle. This feedback can happen in different contexts, like when you put your hearing aids on in the morning and take them off in the evening, or when someone hugs you This is perfectly normal because the hearing aids are reacting to the sound bouncing back from your surroundings.

In case you experience Feedback, please try one of the following:

1. Reduce volume before inserting and removing hearing aid from your ear.
2. If the hearing dome is loose, try a bigger size to ensure a snug fit.
3. If hearing aids are not custom fitted, you will likely experience feedback. Take our hearing test and ensure audiogram is uploaded.
4. Clean and maintain fresh hearing tubes. Wax buildup and broken tubes causes feedback.

Q: What should I do if my hearing aids do not connect to the acosound mobile application automatically?
A: This issue can be caused by two possible reasons: Ensure that you toggle the option on mobile opp “Get paired automatically next time” Ensure that the batteries used in hearing aids are in proper working condition. Drained or weak batteries can cause connection issues.

OUR HOTLINE IS OPEN 7 DAYS A WEEK FOR YOUR CONVENIENCE

• Technical Support Hotline: 202-932-6636

Contact us

• Blaids Hearing 1802 Vernon Street
• NW #2039 Washington D.C., 20009
• Support Contact: 202-932-6636 @ Support@blaidshearing.com

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>