SOHO V4 Professional Audio Gear User Manual

: June 3, 2024
: SOHO

Table of Contents

SOHO V4 Professional Audio Gear
Read User Manual Online (PDF format)
Download This Manual (PDF format)

SOHO V4 Professional Audio Gear

SOHO V4 / SOHO V8 SOHO S10 / SOHO S12 / SOHO S15

Important Safety Instructions
2

10
19

9
18

TABLE OF CONTENTS

1. INTRODUCTION

4

2. FEATURES

4

3. USEFULL DATA

4

4. BACK PANEL DESCRIPTION

5

5. CONNECTION PLATE SYSTEM

8

6. CONNECTION PLATE

11

7. FREQUENCY RESPONSE DIAGRAM

12

8. WIRE CONNECTIONS

14

9. TECHNICAL SPECIFICATIONS

15

10. GUARANTEE

18

11. NOTES

19

3

1

Introduction
Thank you for choosing TOPP PRO. The new TOPP PRO MUSIC GEAR cabinets have been designed to provide a cost effective high grade solution while maintainig high quality cabinet construction and optimum components. Our Professional Audio Products are designed and tested by a highly qualified engineering team with more than 20 years of experience. Great care is placed in delivering products with excellent performance, specifications and dependable reliability. Also great emphasis is placed in creating and bringing to market products that can fill multiple applications and also offer customers exceptional value.

Every TOPP PRO audio product is strictly tested and complied to very strict standards.

2

Features
These series products include passive speaker cabinets, subwoofer, and complete packages.

A) PASSIVE SPEAKERS: · SOHO V4 · SOHO V8 · FLX 5

B) SUBWOOFER: · SOHO S10 · SOHO S12 · SOHO S15

C) PACKAGES: · SOHO S10+V4 SYSTEM (SOHO S10 x 2 + SOHO V4 x 2) · SOHO S12+V4 SYSTEM (SOHO S12 x 2 + SOHO V4 x 2) · SOHO S12+V8 SYSTEM (SOHO S12 x 2 + SOHO V8 x 2) · SOHO S15+FLX SYSTEM (SOHO S15 x 2 + FLX 5 x 2)

3

These products are design to provide a cost effective high grade solution, and they can be used for all kinds of applications, such as churches, conference center, disco, etc. You can select right model according to your request.

4

SOHO S15 15 383

8

110-120V~50/60Hz, 220-240V~50/60Hz
22.1″(561.5mm) x 18.89″(480mm) x 20.47″(520mm) 28.3 kg / 62.4 lbs.

17

8
16

BACK PANEL DESCRIPTION
SOHO S10

4

(1) AC POWER SOCKET WITH MAIN FUSE. (2) ON-OFF MAIN POWER SWITCH. (3) SPK connector to satellite: Use pins + 1 positive / -1 negative (4) CONVECTION FAN (5) IP CONTROL (6) THRU OUTPUT ON XLR CONNECTOR
This is a male XLR-type connector that produces exactly the same signal that is connected to the main input jack or a mix of input1 and input2. (7) Preset Selector: V4 / User (Custom Sound) V4: Allow use this subwoofer with the 4 speaker satellite. Defaults Factory preset User: Adjusts the Equalization according to the convenience of the user, depending on the acoustics of the place and the implementation of the system. This setting can be performed by a PC via LAN port, using a router for internet. This “preset” comes from factory set with the parameters of the V4, after making the necessary changes you can be save into the system. (8) SWITCH FOR FRONT LED ON OR OFF (9) POWER. GREEN LED, INDICATE ON STATUS. (10) SIGNAL / LIMIT, RED LED, INDICATE ON STATUS. (11) INPUT2 ON COMBO CONNECTOR. (12) LINE / MIC SWITCH(CHANNEL INPUT1 ONLY) (13) LINE / MIC INPUT1 ON COMBO CONNECTOR. (14) XLR AND 1/4″ COMBO INPUT2
INPUT2 may accept Hi-Z sources (such as guitars) via the TRS 1/4″ input, or line-level signal via XLR. NEVER connect the output of an amplifier directly to the input of the loudspeaker. This could damage the input circuitry of the active loudspeaker. (15) XLR AND 1/4″ COMBO INPUT1 INPUT1 may accept a MIC or line-level signal via XLR or line-level signal via TRS 1/4″ cable. Be aware of the position of the MIC / line switch (12). (16) RCA INPUTS (INPUT2 ONLY). (17) INPUT1 / MIX SWITCH (THRU OUTPUT) This switch allows you to choose whether only the input1 signal is sent out to the next loudspeaker(switch out- input1) or mix of the input1 and input2 signals are sent out to the next loudspeaker(switch in-Mix).
5

4

BACK PANEL DESCRIPTION
SOHO S12

(1) AC POWER SOCKET WITH MAIN FUSE. (2) ON-OFF MAIN POWER SWITCH. (3) IP CONTROL (4) Preset Selector: V4 / V8 / User (Custom Sound)
V4: Allow use this subwoofer with the 4 speaker satellite. Defaults Factory preset V8: Allow use this subwoofer with the 8 speaker satellite. Defaults Factory preset User: Adjusts the Equalization according to the convenience of the user, depending on the acoustics of the place and the implementation of the system. This setting can be performed by a PC via LAN port, using a router for internet. This “preset” comes from factory set with the parameters of the V4, after making the necessary changes you can be save into the system. (5) SWITCH FOR FRONT LED ON OR OFF (6) THRU OUTPUT ON XLR CONNECTOR This is a male XLR-type connector that produces exactly the same signal that is connected to the main input jack or a mix of input1 and input2. (7) POWER. GREEN LED, INDICATE ON STATUS. (8) SIGNAL / LIMIT, RED LED, INDICATE ON STATUS. (9) Input 2 Volume Control (10) LINE / MIC INPUT1 ON COMBO CONNECTOR. (11) LINE / MIC SWITCH(CHANNEL INPUT1 ONLY) (12) XLR AND 1/4″ COMBO INPUT1 INPUT1 may accept a MIC or line-level signal via XLR or line-level signal via TRS 1/4″ cable. Be aware of the position of the MIC / line switch (11). (13) XLR AND 1/4″ COMBO INPUT2 INPUT2 may accept Hi-Z sources (such as guitars) via the TRS 1/4″ input, or line-level signal via XLR. NEVER connect the output of an amplifier directly to the input of the loudspeaker. This could damage the input circuitry of the active loudspeaker. (14) RCA INPUTS(INPUT2 ONLY). (15) CONVECTION FAN (16) INPUT1 / MIX SWITCH (THRU OUTPUT) This switch allows you to choose whether only the input1 signal is sent out to the next loudspeaker(switch out-input1) or mix of the input1 and input2 signals are sent out to the next loudspeaker(switch in-Mix). (17) SPK connector to satellite: Use pins + 1 positive / -1 negative
6

8

7

BACK PANEL DESCRIPTION
SOHO S15

4

(1) AC POWER SOCKET WITH MAIN FUSE. (2) ON-OFF MAIN POWER SWITCH. (3) IP CONTROL (4) Preset Selector: FLX / V8 / User (Custom Sound)
FLX: Allow use this subwoofer with the 2 speaker satellite. Defaults Factory preset V8: Allow use this subwoofer with the 8 speaker satellite. Defaults Factory preset User/FLAT: Adjusts the Equalization according to the convenience of the user, depending on the acoustics of the place and the implementation of the system. This setting can be performed by a PC via LAN port, using a router for internet. This “preset” comes from factory set with the parameters of the FLX, after making the necessary changes you can be save into the system. (5) SWITCH FOR FRONT LED ON OR OFF (6) THRU OUTPUT ON XLR CONNECTOR This is a male XLR-type connector that produces exactly the same signal that is connected to the main input jack or a mix of input1 and input2. (7) POWER. GREEN LED, INDICATE ON STATUS. (8) SIGNAL / LIMIT, RED LED, INDICATE ON STATUS. (9) Input 2 Volume Control (10) LINE / MIC INPUT1 ON COMBO CONNECTOR. (11) LINE / MIC SWITCH(CHANNEL INPUT1 ONLY) (12) XLR AND 1/4″ COMBO INPUT1 INPUT1 may accept a MIC or line-level signal via XLR or line-level signal via TRS 1/4″ cable. Be aware of the position of the MIC / line switch (11). (13) XLR AND 1/4″ COMBO INPUT2 INPUT2 may accept Hi-Z sources (such as guitars) via the TRS 1/4″ input, or line-level signal via XLR. NEVER connect the output of an amplifier directly to the input of the loudspeaker. This could damage the input circuitry of the active loudspeaker. (14) RCA INPUTS(INPUT2 ONLY). (15) CONVECTION FAN (16) INPUT1 / MIX SWITCH (THRU OUTPUT) This switch allows you to choose whether only the input1 signal is sent out to the next loudspeaker(switch out-input1) or mix of the input1 and input2 signals are sent out to the next loudspeaker(switch in-Mix). (17) SPK connector to satellite: Use pins + 1 positive / -1 negative
7

5

CONNECTION PLATE SYSTEM
Make your initial connections with all the equipment powered off, and ensure that all the main volume controls are turned completely down. 1) Connect one side of the signal cable at your audio mixer into output left / right (with
Stereo-Jack or XLR) and the other side of the cable into the line input (Stereo-Jack) of your active speaker cabinet. 2) Connect the power cord to mains. 3) Turn on your mixer first, then the active speaker cabinets. 4) Turn up the volume control of the active speaker cabinets. 5) Use PFL function to get the proper input level for the mixer, and adjust the Main Mix Level control to manipulate the output level. 6) After using, turn off your stereo power amplifier first, then the mixer.

SOHO V4

Speaker Cable

Pole

Speaker Cable

Pole

SOHO S10

Signal Cable
Left Main Mix Output

Signal Cable
Right Main Mix Output

SOHO S10

Mixer
8

SOHO S15+V8 SYSTEM

6

CONNECTION PLATE SYSTEM
SOHO V8

SOHO V8

5

Speaker Cable

Pole

Speaker Cable

Pole

SOHO S12 / S15

Signal Cable
Left Main Mix Output

Signal Cable
Right Main Mix Output

SOHO S12 / S15

Mixer

9

5

CONNECTION PLATE SYSTEM

Make your initial connections with all the equipment powered off, and ensure that all the main volume controls are turned completely down.

Two Active Subwoofers & Two Passive Satellite Speakers 1) Connect one side of the signal cable to the output of your mixer (left / right) with a TRS or
XLR connector and the other side of the cable to the line input (combo) in the active subwoofer (with a TRS to XLR connector). Then connect the speakon cable from the output of power in the Subwoofer to the satellites input. 2) Complete other connections as illustrated. 3) Turn on your mixer first, then the stereo power amplifier. 4) Turn up the volume controls of your amplifier to about70%. 5) Use PFL function to get the proper input level for the mixer, and adjust the Mian Mix Level control to manipulate the output level. 6) After using, turn off your stereo power amplifier first, then the mixer.

FLX

SOHO S10 / S12 / S15 SOHO S10 / S12 / S15 S15.

Pole
Line Input

SOHO S12 / S15
10

Mixer

SOHO S12 / S15

5
SOHO S10 / S12 /

Para Sistema FLX 5
FLX 5

CONNECTION PLATE
SOHO S10 / S12 / S15 loudspeakers are the perfect tool for singer-songwriters touring the local coffee shops. Bring your favorite axe and MIC, SOHO S10 / S12 / S15 loudspeakers and cables and power cords. Compact and portable perfection. In this example, a dynamic microphone is connected to the input1 of a SOHO S10 / S12 / S15 loudspeakers. Be sure that the MIC / line switch is down in order to get an extra 30dB boost for the MIC. Be sure the switch is OUT if anything other than a microphone is attached to the input1. Adjust the level for the MIC now. Now grab your axe and plug it directly into the input2. Or if you use effects, connect the guitar to the effects input and anther cable from the effects output to the input2. Adjust the level for the guitar now.

6

FLX 5

SOHO S12 / S15

11

7 FREQUENCY RESPONSE DIAGRAM

SOHO S12 / S15

12

FREQUENCY RESPONSE DIAGRAM
SOHO S15+V8 SYSTEM

7

13

8 WIRE CONNECTIONS
14

SOHO S15