Oley F4 MAKE Life Difference Projector User Manual

Oley F4 MAKE Life Difference Projector

Product Specifications

• Display Technology: Native Resolution Flip
• Projection Mode:
• Projection Lens:
• Aspect Ratio:
• Lamp Power Supply:

Product Overview

• 1 Focus Lens
• 2 IR Receiver
• 3 HDMI 1
• 4 HDMI 2
• 5 USB 1
• 6 USB 2
• 7 AV Port
• 8 3.5mm Port for Audio Output
• 9 IR Receiver
• 10 Speaker
• 11 Power Port
• 12 Cooling Window

Remote Control
Note: Before using the remote control, put two AAA batteries

Frequently Asked Questions (FAQ)
Q: How do I change the input source on the projector?
A: To change the input source, press S on the projector or use the arrow keys on the remote control to navigate to the signal source menu, then press OK to select the desired input source.

User Manual
MAKE LIFE DIFFERENCE

Please read this manual carefully before using the projector.

WARNINGS

1. Do not look directly into the projector light.
2.  Don’t touch the projecting lens.
3. Mains adapter is used as a disconnect device and it should remain readily operable during intended use. In order to disconnect the apparatus from the mains completely, the mains plug should be disconnected from the mains socket outlet completely.
4.  Use of controls or adjustments or performance of procedures other than those specified may result in hazardous radiation exposure.
5. Changes or modifications to this unit not expressly approved by the party responsi-ble for compliance could void the user’s authority to operate the equipment.
6. Use of this unit near fluorescent lighting may cause interference regarding the use of the remote. If the unit is displaying erratic behavior move away from any fluorescent lighting, as it may be the cause.
7. Shock hazard – Do Not Open.
8.  Caution and marking information is located at the rear or bottom of the apparatus.
9. WARNING: To reduce the risk of fire or electric shock, do not expose this apparatus to rain, moisture, dripping, or splashing.
10. Objects filled with liquids, such as vases, shall not be placed on the apparatus.

PRODUCT OVERVIEW

1. Focus Lens
2. IR Receiver
3. HDMI 1
4. HDMI 2
5. USB 1
6. USB 2
7. AV Port
8. 3.5mm Port for Audio Output
9. IR Receiver
10. Speaker
11. Power Port
12. Cooling Window

PRODUCT OVERVIEW

1. Power
2. Menu
3. Input Source
4. Return
5. Ok Key
6. Arrow Keys
7. Rubber Foot Mats
8. Lens Cleaning Window
9. Ceiling Mounting Holes for the projector ( the size of the ceiling mounting holes is M6)
10. Height Adjustment Machine Feet
11. Cooling Window

REMOTE CONTROL

Note:
Before using the remote control, put two AAA batteries into the back cover of the remote control.

PRODUCT SPECIFICATIONS

Mounted Front Projection/ Ceiling Mounted Rear Projection
Projection Lens| 6 Slices Glass Lens
Aspect Ratio| 16:9/4:3
Lamp| LED, 100000 Hours
Power Supply| AC100V-240V~50/60Hz

MULTIMEDIA SUPPORTED FILES

①Audio Format

| MP3/AAC/FLAC/OGG/MAV/WMA

/M4A

---|---
②Image Format| BMP/JPGIJPEG/PNG

③Video Format

| 3GP/AVI/FLVI/MKV/MP4/MPG/WMV

/RMVB/RM/TRP/VOB/DIVX/TP/TS/ DAT

STARTING PROJECTOR

1. Power on/Power off5 seconds after power-on, then press the power key on the projector panel or the remote controller to turn on the device Press the power key on the projector control panel or the remote control to turn off the device. When the machine is turned off, unplug the power line in time to save energy.
2. Focus and Keystone Correction
   Focus (P1): Let the projector be perpendicular to the wall, and adjust the Focusing ring to make the picture clear.
   Keystone Correction(P2): In different angel, you put the projector, the the projection will Deformation like a trapezoid, use the keystone correction to make it correct.

CONNECTING

1. Select Signal Source
   Press “ S of the projector or of the remote control, enter the signal source menu.

2. Use the arrow keys and the “OK” to select the signal source.

Wireless Screen Mirroring

1. Connect Smartphone
   For iPhone

2. Select “Miracast” in the signal source menu of the projector and then select “IOS & Android phone”.

3. Swipe down from the top of the iPhone interface to enter the control center, then click “Screen Mirroring”, select CLcast-****, and enter PIN code: 9999 to complete the connection.
   

For Android phone

1. Select “Miracast” in the signal source menu of the projector, and then select “IOS & Android phone”.
2. Slide up from the bottom of the Android phone interface to enter the control center, then click “Screen Mirroring” and select CLcast-**** and enter PIN code: 9999 to complete the connection.

For Google Phone

1. Select “Miracast” in the projector’s source menu, then select “Google phone”
2. Select “next” to connect the projector to your WiFi
3. Connect your mobile phone to your WIFI (PS: The projector is required to be connected to the same LAN as your Google mobile phone)
4. Swipe down from the top of the Google phone interface to enter the control center, then click “Screen cast”, select CLcast-**** to complete connect

NOTE: If you are unable to mirror your Google phone, it may be due to Google releasing a new network connection protocol. Please contact the customer service team of your projector and request an upgrade of the system version.

For Windows devices

1. Select “Miracast” in the source menu of the projector, and then select “Laptop”.
2. Press “Windows Key” + “P” on your Windows device,
3. Select “Connect to Wireless Display”
4. Click “CLcast-***” and enter “9999” to start screen sharing.

Add: Different brand laptop output keys are as follows:

For MacBook

1. Select “Miracast” in the source menu of the projector, and then select “Laptop”. Click the “AirPlay icon” in your Mac Dock.
2. Click on “CLcast-***” and enter “9999” to finish casting

PS: If the airplay icon is not in your Mac Dock, you can enable it by selecting “Settings” (Apple menu icons) -> Show,” then select “Show mirroring options in the menu bar when available”

(4) Connecting a tablet or other WiFi device

1.  Select “Miracast” in the signal source menu of the projector and then select WI-FI CONNECTION;
2. Click next to connect the projector to your WIFI.
3. Connect your device to WIFI. (the same wifi as the projector)
4. Open Control Center on your device, select Screen Mirroring, search, and click CLcast-**** to complete the connection.

Connecting to HDMI Devices

The projector can connect to devices with the HDMI output function. Compatible with Laptop, DVD players, Blu-ray players, Chromecast, TV Stick, etc. (HDMI cable is included).

1. Use the HDMI cable (included in the package) to connect the HDMI device to the projector
2. Select media signal channel: “HDMI”.

Add: Different brand laptop output keys are as follows:

The user of Windows 7 or over Windows 7. Simply press the + P, and select duplicate to connect. If the operation above is invalid, please update the computer graphics driver.

 Connect the USB drive

1. Plug a USB drive into the USB port of the projector, and when “USB” is in the upper right corner of the projector, connect successfully.
2.  To play a video, picture, music, or text stored in a USB drive, select “Movie”/ “Photo”/ “Music”/”Text” on the main menu, and press “OK”.

Note:
The chip of this projector is not compatible with files (Microsoft Office, PDF, and text) on the USB stick(If you want to play files, please keep the files on your laptop or DVD player, then connect this projector to them.)

Connect AV video devices

1. Use the 3 in 1video cable (Included in the package) to connect with AV.
2. Choose the media signal channel: “AV”.

Connect 3.5mm audio devices

Support 3.5mm earphones and other cable sound devices.

Connect Bluetooth audio

Warm Tips:
Bluetooth projector can only be used to connect sound devices such as speakers, headphones, sound bar, etc, not to computers or smartphone.

How to Connect the Bluetooth Device:
When you are trying to connect to a Bluetooth device, please make sure the Bluetooth device is on and in Bluetooth pair mode before connecting.

1.  Start the Projector and click on “Setting” – “OPTION” – “Bluetooth Setting” (as shown above), turn on the Bluetooth- then press “Search Bluetooth” , Bluetooth devices name will be shown below, select the right device and press the “OK key” to connect it.

PROJECTOR SETTING

PICTURE MENU

When “Picture Mode” is “User”, the Contrast / Brightness / Color / Sharpness can be adjusted.

mode

Rotate Front Projection

| Front on Desk/Rear on Desk/ Front on Ceiling/ Rear on Ceiling|

Set up the projection mode

SOUND MENU

When “Sound Mode” is “User”, the Treble /Bass can be adjusted.

speaker

TIME MENU:

set amount of time
Auto Sleep| Off/3/4/5H| Set automatic sleep timer
OSD Timer| Never/5/10/15/20/25/30s| Set OSD timing

OPTION MENU:

displayed in the operation
Aspect Ratio| 4:3 / 16:9|
Blue Screen| | No signal blue screen operation
Bluetooth Setting| ON / OFF| Connect your bluetooth device
Restore Factory Default| | Reset
Software Update(USB)| | Update software via usb
Reduce Display| 50-100%| Reduce the projection size

TROUBLESHOOTING

1. Why is the display of the projector available but without audio?

• The Projector or the connected device (PC, DVD, etc.) is muted.

• Due to Dolby’s copyright issues, the current regular projectors selling on Amazon do not support Dolby sound, So there will be no sound when you play Dolby sound videos, (Amazon fire stick, Netflix, Blue-ray movies, and so on) In this case, please kindly turn off the Dolby sound on your device or apps.
  (Settings > Display & Sounds > Audio > Dolby Digital Output > and then turn Dolby Digital (OFF))

• The audio format is not supported by the projector.

• Encryption applied to the videos or media player which holds the video. Try more videos to define this possibility. 2. Why is the audio of the projector available but without a display?

• The video format is not supported by the projector.

• Encryption applied to the videos or media player which holds the video.

• If the lamp of the projector is off with only audio playing, the lamp is defective. Please contact the Customer Service Team for a replacement.

• Try another HDMI cable if you select the HDMI input source. 3. Why does the projection screen show no signal?

• Make sure all cables are plugged correctly and firmly.

• Make sure you select the right input source. For example, if you insert a USB drive,
  please select USB in the interface of Input Source.

  4. **How can I do if the image is blurry or out of shape? ***
     Adjust the focus and keystone ring by moving it leftward/rightward till it shows the best images.

• Place the projector on a flat surface horizontally or vertically.
  An inclination of any angle may result in blurry displays or uneven colors.

• Projecting wall or screen be clean white if possible. 5. How can I do if the image is upside down?

• Enter Menu-Picture-Projection Direction to flip the projection image accordingly. 6. How can I do if the projection screen is not square or allied horizontally?

• Make sure the projector is placed on a flat surface with a projector light in the middle of the screen.

• Make sure the projector screen is placed horizontally. 7. How can I do if there is color distortion?

• Make sure the video source has a fine resolution.

• Adjust the colors: enter Menu-Picture-Color Temperature, then select different modes  and adjust the value accordingly.

• Reset the projector to manufacturer setting: enter Menu-Option Restore Factory  Default to reset. 8. How can I do if the remote is unresponsive?

• Make sure the batteries are installed correctly and the power is enough.

• The remote works with the projector through the IR receiver. The remote works only when the IR receiver is within the direct reaction distance and will be unresponsive if the
  IR receiver is blocked or covered.

  9. How should I do if there are small dots on display?

• It may be caused during installing or shipping, please contact HONPOW to get the video about how to clean it. 10. Why do some lag/ jerky appear when playing video or play games?

• Due to the technical bottleneck of the current 1080p projectors, most of the 1080p projectors on the market cannot smoothly play 1080p/60fps videos. Hope you could understand.
  Please change the 1080p/60fps to 1080p/30fps.

  11. How to Connect and Watch Netflix？
      All projector with mirror display doesn’t support playing protected video when you connect it to your smartphone directly. (Netflix, Prime Video, Hulu, etc)
      Because these videos have an encryption protocol, the projector has no right to recognize when it is connected directly to the phone via the USB interface. Hope you understand. (Projector without mirror display, need an HDMI adapter if you want to connect it to your smartphone)

Please follow the ways below to watch Netflix

First Solution:
You can watch Netflix via Chromecast/laptop/Iv stick/Roku on our projector.

Second Solution:
You can connect the computer/ Smart TV to the projector through HDMI when playing movies from Netflix

Third Solution:
You can buy a Wireless HDMI Dongle to mirror your phone.
The reason why the fire stick or other HDMI device can play Netflix is that the HDMI interface encryption protocol includes Netflix’s.
It works with youtube, chrome, safari, and Facetime when you connect it to a smartphone directly.

12. How to stream video from iPhone to the projector (IOS only)
Note: The projector defaults to screen mirroring mode, if you need to use Airplay, please set Airplay mode manually.

1. Select “Miracast” in the source menu of the projector.
2. Select “Settings”.
3. Select and click “Mirror Setting”.
4. press the right button on the remote control to select Airplay.
5. press the back button on the remote control to return to the “Miracast” menu (press the back button directly, you cannot select the cancel window), then Select “google phone”.
6. Tap the airplay icon in the streaming APP, then select CLcast-**** in the list to complete the video streaming.

FCC WARNING

This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions:

1. this device may not cause harmful interference, and
2.  this device must accept any interference received, including interference that may cause undesired operation.

Any changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.

NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications.
However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception,
which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

• Reorient or relocate the receiving antenna.
•  Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help.

To maintain compliance with FCC’s RF Exposure guidelines, This equipment should be installed and operated with minimum 20cm distance between the radiator and your body: Use only the supplied antenna.

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>