UNiMiG U51009 Wireless Foot Control User Guide
- June 3, 2024
- UNiMiG
Table of Contents
UNiMiG U51009 Wireless Foot Control User Guide
Start this process by ensuring both your machine and the foot control are
powered on.
You will find the power switch on the bottom of the foot control next to the
battery tray.
RAZOR MULTI 230 AC/DC CONTROL PANEL
SETTINGS MENU
-
Turn the main control knob from the home screen until you see the settings menu, then press the control knob to enter into the settings menu.
-
Press the right physical button while in the General settings menu to enter into the Machine settings sub menu.
-
Turn the main control knob to select the option for WIRELESS FOOT CONTROL.
Press the knob twice to begin the pairing process. -
Press the foot control down to complete the pairing process.
-
Success “Foot Control Connected” will appear on the screen. The foot control is now ready for use.
To disconnect, repeat step 3. Do not forget to turn the foot control off. If
you are having difficulty connecting the foot control, please ensure the
batteries have sufficient charge for usage and try again.
If this does not fix the connection problem, power cycle both the foot control
and the machine and attempt again. If you are still not able to connect the
foot control, please contact UNIMIG service.
***ENSURE remote mode is turned off while using wireless foot control. This setting is in the menu below WIRELESS FOOT CONTROL.
Documents / Resources
|
UNiMiG U51009 Wireless Foot
Control
[pdf] User Guide
U51009 Wireless Foot Control, U51009, Wireless Foot Control, Foot Control,
Control
---|---