IKA-2H Household Gas Hob Instruction Manual

IKA-2H Household Gas Hob

PLEASE READ THE MANUAL CAREFULLY BEFORE OPERATION.

USAGE ILLUMINATION OF HOUSEHOLD GAS STOVES

The instructional booklet introduces features, functions, installment explanation, operation steps and fire regulating methods of built-in household gas as well as its maintenance and reparation guide and solutions to familiar malfunctions.

Main technical parameters

IKA-2H/SV

IKA-2V/SV

Installment illumination and component sketch map

• Unwrapping packing carton of gas take the hole-punching template out. Punch embedding hole on the countertop according to the size of the template or dimension provided by it. (Diagram 1) Bottom of the cupboard of built-in gas shall leave out a space for air inlet of over cm2 to ensure the air’s free flow into its bottom.
• When punching holes, ensure that gas shall be installed where other articles are over 150mm far away from it and keep a space of over 100cm above the top of it. (Diagram 2)
• Gas and gas cylinder must keep a distance of 50-100cm. Rubber gas admitting pipe shall be no longer than 150cm and kept away from stove body and not crossing through the bottom of gas stove.

IKA-2V/SV

IKA-2H/SV

• Get rid of foam underlay. packing bag and dustproof cover and suit specialized gas-admitting pipe and clip it tightly with pipe clamp then check if there is a leakage using soap liquid.
• Open battery box up from the bottom of gas stove and place two 1 # batteries into it under correct polarity.
• Stick rubber mud strip to the bottom shell along the lower surface of its circumambience.
• (Both table-top and built-in type) When gas stove is used as table-top type, need not punch embedding hole on countertop and merely install four feet on its bottom for operation.

1. The cutting area should be the same as the size of the template.Put down the template on the cabinet and mark it accordingly;
2. Cut the cabinet according to mark, clear burr and sundries.

Operation steps and adjustment method

Ignition operation

1. Regulate two knobs to the position of “OFF” then open overall gas supply.
2. Press knob and turn it counterclockwise. For pulse ignition, main fire forms automatically with the clattering of ignition needle; For piezoelectricity ceramic ignition, igniter will light up with the sound of a crack. And may take hands away after main fire establishes.

Fire regulation

Turn knob slowly to obtain desired flame according to diagram 4. Turn knob clockwise to the position of “OFF”, and flame will quench automatically then shut off gas supply.

Air cock regulation

In case of unstable flame, shall regulate air cock to stabilize it. In case of removed flame or renegade fire, reduce air cock and in case of yellow flame or black smoke, enlarge air cock. Proper flame color is light blue. Regulation method (see diagram 3): moving-up of air cock is to reduce it otherwise is to enlarge it.

Safety protection

In the event of accidental fire, ionic induction type protective device will shut off safety valve automatically to stop gas supply within 8 seconds and thermoelectricity type protective device will shut off safety valve automatically to stop gas supply within (wind flow-out: 45 seconds and water pour-out: 5 seconds).

Safe operation and warning

• Please ensure that current fuel gas is identical with that on the nameplate of gas stove before operation. Otherwise, do not operate the device.
• Keep kitchen draughty and necessarily equip with air inlet and keep smoke displacement devices on operation. (Scavenger fan or smoke ventilator)
• In case that gas leakage or exceptional smell occurs, immediately shut off overall gas supply switch, open door and windows to circulate air inside kitchen naturally. Do not submit the device to operation until fuel gas is completely dispatched. To prevent accidents from happening, do not scavenge air by electric appliance or operate switch of any electric device.In case that one burner flames out accidentally, safety valve will shut off gas supply automatically and another burner will also flame out. For a new operation, turn two knobs to the position of”OFF” and repeat the ignition operation (apply to ionic induction safety type).
• When scant pressure indicator light flashes, shall displace batteries ( apply to gas stove with scant pressure device).
• No placing or storing inflammable and explosive articles around gas stove.
• Keep specialized gas-admitting rubber pipe being displaced for around every one and a half year to prevent gas leakage from happening caused by its aging and break for safety operation.
• When finishing operation of gas closing up knobs.

Cleaning as well as installment and dismantling

• To keep tidy appearance of gas stove, rid up its table-board and circumambience periodically.
• To avoid blockage of fire orifices, remove fire cover and sweep them periodically.

Maintenance and Repair Guide

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>