LUXPRO LP290V3 High-Output Everyday Pocket Light User Manual
- June 4, 2024
- LUXPRO
Table of Contents
LUXPRO LP290V3 High-Output Everyday Pocket Light User Manual
Operation Instructions
On/Off: Press and release the button on the tail cap to turn the light on and off.
Cycle Modes: First turn the light on by pressing down the button on the tail cap completely and releasing. Half-press to cycle through the modes (High/Low/Strobe). Turning the flashlight on and off quickie and repeatedly will also cycle the light through the three modes.
The light will automatically reset to High mode when off for longer than 2 seconds.
Features
Constructed with aircraft-grade aluminum
LPE Optics
Patented TackGrip molded rubber grip
High quality pocket clip
Tactical on/off button
IPX4 waterproof rating
Batteries included (2 AA)
Battery Replacement
The LP290V3 uses 2 AA batteries. To replace the batteries, turn the tail cap counter clockwise to remove it. Tip the light downward to slide out both batteries. Insert two new batteries(+) side facing down. For best results, we recommend using brand new alkaline batteries that are the same voltage and brand. Re-attach the tail cap by pressing down lightly and turning it clockwise until tight.
If you know it will be a while between uses, we suggest removing the batteries from the flashlight and storing it in a dry, protected place.
Product Warranty
The LP290V3 has a Limited Lifetime Warranty Against Manufacturer’s Defects
from time of purchase.
For warranty claims please contact us by calling
801-553-8886 or sending an email to
info@simpleproducts.com
luxpro.com
866.553.8886
14725 S Porter Rockwell Blvd Ste C
Bluffdale, UT 84065
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>