MIFA X180 Bluetooth 5.0 in-Ear True Wireless Earbuds USER GUIDE

MIFA X180 Bluetooth 5.0 in-Ear True Wireless Earbuds

SPECIFICATION

• BRAND MIFA
• FORM FACTOR In Ear
• CONNECTIVITY TECHNOLOGY Bluetooth, USB
• EAR PLACEMENT In Ear
• WATER RESISTANCE LEVEL Waterproof
• PRODUCT DIMENSIONS 28 x 1.83 x 1.1 inches
• ITEM WEIGHT 2 ounces
• BLUETOOTH VERSION 0
• BATTERIES 3 Lithium Ion batteries required.

WHAT’S IN THE BOX

• in-Ear True Wireless Earbuds

SAFETY INSTRUCTION

• To ensure proper use and trouble-free operation, please carefully read this user manual first.
• Please use and store the product at room temperature.
• Do not throw and drop the product to avoid damages.
• Do not disassemble the product, or make any modifications to the structure or any part of it.
• Please charge with a rated voltage charger.
• Keep the product out of children’s reach.
• Do not replace the built-in batteries of earphones and charging boxes.
• Do not expose the product to fire, high temperature, direct sunlight, etc.

HOW TO PAIR

• Step 1 Open the lid of the charging case. After that, the earbuds will turn on automatically.
• Step 2 Go to the device’s Bluetooth settings.
• Step 3 Select “Mifa X180”. If a password is needed, type “0000”.
• Step 4 After that, the pairing will be done.

HOW TO TURN ON AND OFF?

• Switch on Open the charging case’s lid. The earbuds will then start up automatically after that.
• Shut down Close the charging case’s lid after inserting the earbuds inside. The earbuds will then shut off on their own after that.

HOW TO OPERATE?

• Play or pause music Press the multifunction touch button on any of the earbuds two times.
• Play the next song Press the multifunction touch button on the right earbud three times.
• Play the previous song Press the multifunction touch button on the left earbud three times.
• Answer an incoming call Press the multifunction touch button on any of the earbuds one time.
• End a call Press the multifunction touch button on any of the earbuds one time.
• Activate the voice assistant Press the multifunction touch button on the right earbud two times.

HOW TO CHARGE

Earbuds

All you need to do to charge the earbuds is put them in the charging case and close the lid. The earbuds will begin charging on their own.

Charging case

All you need to do to charge the charging case is attach it to a USB charger or charging port using the USB-A to C cable that is provided. Automatic charging will begin.

HOW TO RESET?

• Place both earbuds in the charging case as the first step.
• For roughly 3 seconds, press and hold the multifunction button on each earbud.
• The resetting is complete when the lights on the charging case flash three times and a red light appears inside the earbuds.

SOME COMMON EARBUDS PROBLEMS & TROUBLESHOOTING

If this occurs, it might be because the battery is running low or because the connection to the device was not made properly. You can do the following to correct this:

• Try charging the malfunctioning earbud or both of them by putting them in the charging case.
• Consider doing an earbud factory reset.
• Inspect the earbuds to see if they are functioning within a regular functional range.

If that doesn’t work, the earbud is likely defective, in which case I can request a refund or replacement.

FAQs

Waterproof Mifa X180s are they?

The Mifa X180 has an IPX7 water-resistant classification, which means that in addition to being resistant to water, it is also protected against the negative consequences of immersion.

Has the Mifa X180 a microphone?

The Mifa X180 does indeed come with built-in microphones.

Are there low latency/gaming modes on Mifa X180?

Yes, there is a low latency/gaming mode on the Mifa X180.

When are Mifa X180 batteries fully charged?

The earbuds charge in roughly 1.2 hours, so they should be fully charged by then.

Can Mifa X180 link to a laptop or a computer?

Yes, the Mifa X180 is compatible with tablets, laptops, and PCs.

Why do my earbuds pause and resume?

The Bluetooth signal will be impacted by a number of variables that led to the earbuds cutting in and out, including low battery, an obstruction, an excessive number of active APPs, a long range, and others. Make sure the earphones have enough power and connect them in a clear line of sight.

Why do I not hear any sound after connecting the earbuds to my phone?

The earbuds themselves lack a volume control; to verify the sound, turn up the volume on the connected device. When utilizing music players or other devices, be sure they support SBC and AAC profiles.

Is MIFA a well-known earbuds brand?

With a well-balanced EQ and decent clarity, these earbuds offer respectable quality for the price. The general design is uninspiring, and the battery life is subpar. The MIFA True Wireless Bluetooth Earbuds, on the other hand, are pretty much the complete opposite.

Which charging method works best for MIFA earbuds?

Before using an earbud for the first time, take it out of the charging case and remove the protective film. After that, put them back in the box and recharge it with a USB cable. 76 to 100 percent: 4 flashes separated by 2 seconds The LED indication will continue to glow while fully charged.

What’s the typical life expectancy of wireless earbuds?

You can anticipate your earbuds to last somewhere between six months and two years on average. Depending on the brand and the kind of damage they sustain, this will change. It’s time to replace them when their sound begins becoming distorted or ceases altogether.

How can I turn up the volume on my MIFA earphones the best?

In dual earbud mode, press the left earbud volume button to lower the volume and the right earbud volume button to increase it. To use just one earbud, turn on the volume control.

Exactly where is the power button on wireless earbuds?

Push the power button on the case’s front to start charging the earbuds after placing them inside the charging case.

Read User Manual Online (PDF format)

Download This Manual (PDF format)

Download this manual  >>