mifa X3 Wireless Sport Earbuds Manual
- June 8, 2024
- MiFa
Table of Contents
mifa X3 Wireless Sport Earbuds Manual
Warnings
What is in the box
Charging
Before the first use, please take the earbuds out from the charging box and take off the protection film on each earbud. Then put them back in the box and charge it with a USB cable.
Battery indicator of charging box
0%-25%: Flashing once between 2 seconds
26%-50%: Flashing twice between 2 seconds
51 %-75%: Flashing3 times between 2 seconds
76%-100%: Flashing4 times between 2 seconds
The LED indicator will keep on while fully charged.
Power on/off
Power on and TWS Pairing :
Take out the earbuds from the charging box, they will power on and pair with
each other automatically. The blue light of the right earbud will flash
indicating it’s waiting for pairing with a smart device.
Note : Before the first use, please take off the protection film on each
earbud and put them back in the box. Close the box and then open it again
Power off : Put the earbuds in the charging box, they will auto-power off and charge.
Manual power on : Press and hold the touch sensor area until power on, there will be a voice prompting and blue light will keep on for 1 second.
Manual power off : Press and hold the touch sensor area until power off, there will be a voice prompting and red light keeps on for 1 second
Connect with Smart device
Connect with Smart device
After the earbuds connected with each other, activate the Bluetooth of your
device and find X3 on the list and then click it to connect with. The earbuds
will beep once the pairing is successful and blue light will turn off. If a
pin code is required, please input “0000”.
Tips : The earbuds can be used separately. Each one is designed as a independent Bluetooth earbud.
Tips :
- It will auto-connect the last paired device when it powers on.
- If you want to connect with other devices, please turn off the Bluetooth of your last paired device and then the earbud is available for pairing with a new device.
- Put the earbud in the charging box and it will charge automatically.
- The earbud will auto-power off in 10 minutes if Bluetooth is not connecting.
- Please make sure the earbuds are in pairing mode (the indicator of the master earbud flickers) if the earbuds cannot pair with your device.
Smart Touch Control
You can operate as below after earbuds connected with your smart phone.
Music playback controls
Play/ Pause : Touch once the sensor area of one earbud.
Next : Touch twice the sensor area of the right earbud to play the next
track.
Previous : Touch twice the sensor area of the left earbud to play the
previous track.
Hands-free calls
Touch once the sensor area of one earbud to answer the coming call, touch again to hang up.
Reject calls
Touch and hold the sensor area of one earbud for2 seconds to reject a call.
Note : The earbuds support two-way stereo calls.
Product Parameters
Earbud
Battery: 40mAh each
Bluetooth version: Bluetooth 5.0
Working Voltage: 3.7V
Loudspeaker: lpc <[)8MM 160 5 mW
Sensitivity: -40±2dB
Frequency: 120Hz ~ 20KHz
Bluetooth protocol: HSP/ HFP/ A2DP / AVRCP
Bluetooth format: sbc, aac, mp3
Weight: 5 g (single one)
Size: 43 x 23.5 x 24.5 mm
Charging Box
Charging box battery capacity: 450mAh
Charging: Charge with a DCSV-lA USB adaptor
Weight: 50 g (exclude earbuds)
Size: 98 x 48 x 23 mm
MIFA INNOVATIONS LLC
Hotline : 4007-881-899
www.mifa.net Designed in US Made in China
Copyright© MIFA.AII rights reserved.
MIFA, the MIFA logo and other MIFA marks areal I owned and registered by MIFA
INNOVATIONS LLC. All other trademarks are the property of their respective
owners
The information contained here is subject to change without prior notice.
mifa X3 Wireless Sport Earbuds Manual – Optimized PDF
mifa X3 Wireless Sport Earbuds Manual – Original PDF
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>