Wild Camping Outdoor Bluetooth 5.3 speakers User Guide
- June 5, 2024
- MiFa
Table of Contents
mifa Wild Camping Outdoor Bluetooth 5.3 speakers
PACKING CONTENTS
POWER ON
- When the speaker is abnormal, press and hold the power button for B seconds and release it, it can be forced to reset and restart.
BLUETOOTH CONNECTION
MODE SWITCH
PLAY
LIGHT
Tip: When the lighting knob is turned to the minimum, the lighting function will be automatically turned off after 15 minutes.
PARTYADD
- Press the button of any speaker to enter party add state becomes the main speaker while its white light flickers slowly.
- Press and hold the buttons of the others speaker for 2 seconds to enter the party add state as well, they will be the following speakers while their white light flickers quickly.
- Once connected, the white light of main speaker flickers slowly and the white light of the following speakers stay on.
BATTERY
POWER BANK
Technical Specifications
- Speaker: 2xD45mm Full-range loudspeakers
- Passive Radiators: 2x Bass Radiators (46mmx 66mm)
- Output Power: 2x10W RMs
- Frequency Response: 7Hz-20kHz
- Signal-to-noise Ratio: >80dB
- Battery Type: Lithium battery 3.7V 9600 mAh/35.52Wh
- Charging Port: USB-0
- USB-A Output: 5V/2A (MAX)
- Battery ChargingTtime: about 4 hours (5V/3A)
- Speaker Play Time: about 38 hours ( depends on volume and audio content, light oft)
- Lighting Duration: about 18 hours ( ight in max brightness, audio oft)
- Combined Duration: about 13 hours (depends on volume and audio content, gnt in max brightness)
- Bluetooth Version: 5.3
- Micro SD format: MP3, WMA, WAC, FLAC, APE
- Protection Level: TP6/ waterproof and dustproof
- lighting Color Temperature: Candlelight 2000K, soft white 2700K
- Lighting Brightness: 230Lumen
- Product Size: L10mm 253.5mm 110mm/4.33″ *9.98** 4.33″
- Product Net Weight: 0.82kg
FCC Rules
This device complies with part 15 of the FCC Rules. Operation is subject to
the following two conditions: (1) This device may not cause harmful
interference, and (2) this device must accept any interference received,
including interference that may cause undesired operation.
Any Changes or modifications not expressly approved by the party responsible
for compliance could void the user’s authority to operate the equipment.
Note: This equipment has been tested and found to comply with the limits
for a Class B digital device, pursuant to part 15 of the FCC Rules. These
limits are designed to provide reasonable protection against harmful
interference in a residential installation. This equipment generates
uses and can radiate radio frequency energy and, if not installed and used in
accordance with the instructions, may cause harmful interference to radio
communications. However, there is no guarantee that interference will not
occur in a particular installation. If this equipment does
cause harmful interference to radio or television reception, which can be
determined by turning the equipment off and on, the user is encouraged to try
to correct the interference by one or more of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help.
This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and operated with minimum distance 20cm between the radiator & your body.