chicco Next2me Magic Co Sleeping Bed Instruction Manual

Next2me Magic Co Sleeping Bed
Instruction Manual

Next2me Magic Co Sleeping Bed

C hiCCo Next2me CriB
IMPORTANT – READ CAREFULLY AND KEEP FOR FUTURE REFERENCE.

WARNING: TO AVOID DANGER OF SUFFOCATION REMOVE THIS PLASTIC COVER BEFORE USING THE PRODUCT. THIS COVER SHOULD BE DESTROYED OR KEPT AWAY FROM BABIES AND CHILDREN.

WARNING: Do not use this product with out reading the instructions for use first.

• WARNING: When in its highest position the product is intended for use by children of 0 to 5/6 months (weighing up to 9 kg).
• WARNING: Stop using the product as soon as the child can sit or kneel or pull itself up.
• WARNING: Placing additional items in the product may cause suffocation.
• WARNING: Do not use the product if any part is broken, torn or missing.
• WARNING: DO NOT USE the product in “Crib Configuration” and/or “Bedside sleeper Configuration” if any part is missing, damaged or broken. Contact Artsana SpA for spare parts and user instructions if needed. DO NOT REPLACE missing, damaged or bro– ken parts with non-OEM components or components not approved by Artsana SpA.
• WARNING: Consult the user manual for the list of components. Examine the prod– uct regularly to make sure that there are no loose, damaged or missing parts.
• WARNING: Always use all parts needed for each configuration of use.
• WARNING: Be aware of the risk of burns from cigarettes, naked flames and other heat sources, like electric or gas heaters, that are near the crib.
• Before assembly, check that the product and all of its components have not been damaged during transportation. Should any part be damaged, keep out of reach of children and do not use.
• Make sure that the adult using the product knows exactly how it works.
• WARNING: The product is ready for use only when all locking mechanisms are engaged. Make sure they are securely engaged before use.
• WARNING: When your child is unattended and the product is in “Crib Configuration”, always make sure that the side is raised and locked in the closed position and aligned with the upper perimeter of the crib.
• When the product is being used, and above all in “Crib Configuration”, the wheels must always be locked.
• All operations for opening, adjusting, fastening and installing the product must be carried out by an adult.
• Before using in the “Bedside sleeper Configuration” (fastened to bed), make sure the product is fastened and installed correctly. Check the fastening system hold before each use by attempting to push the crib away from the parents’ bed.
• The fixing straps are included in the packaging. Other fastening systems should not be used.
• To prevent danger of choking due to the child’s head being trapped, when the crib is in the “Bedside sleeper Configuration” (fastened to the bed) it should be properly fastened to the parents’ bed with the fixing straps as explained in the instruction booklet.
• WARNING: Before placing the child inside the crib when the product is in the “Bed– side sleeper Configuration” (fastened to the bed), be sure that the fixing straps are fastened and tightened correctly. The product must be attached to the parents’ bed frame/support and there should be no gaps between the lowest part of the Bedside sleeper crib and the parents’ mattress.
• If there are gaps between the lowest part  of the Bedside sleeper crib and the parents’ mattress, DO NOT use the product.
• Do not fill any spaces or gaps between the parents’ mattress and the crib with pillows, blankets, bedsheets or any other material that may cause a choking hazard.
• DANGER! The Bedside sleeper, when not attached to the adult’s bed, shall have all its sides in place and/or in their highest position.
• WARNING: To avoid hazards from the child’s neck being caught on the top rail on the side that is next to the adult bed, the top rail must not be higher than the adult bed mattress.
• WARNING: To avoid the risk of your child being strangled the attachment system to the adult’s bed shall always be kept away from and out of the criy
• The product must always be placed on a horizontal surface. Never leave the product on a sloping surface with your child inside.
• Unattended children must not be left to play near the product.
• Do not use the product without the frame.
• Keep the fixing straps out of reach of children.
• Only use the mattress provided with the product or replacement mattresses ap– proved by Artsana.
• WARNING: Do not use more than one mattress in the product. Only use the mat– tress that comes with the product.
• WARNING: Only use the mattress sold with this crib, do not add a second mat– tress on this one, suffocation hazard.
• WARNING: When not attached to the bed, the crib can be inclined by a maximum of 2 positions between one leg support and the other.
• Infants can suffocate on soft bedding. Avoid placing pillows or similar items under newborn babies for additional comfort during sleep.
• Use the crib in the “Bedside sleeper Configuration” (fastened to the bed) only with beds of the size indicated in the reference figure at the beginning of the manual
• Do not leave anything inside the product that might reduce its depth.
• To prevent the child from being trapped, do not place the crib close to walls or obstacles.
• Do not leave any small objects inside the product that might be swallowed.
• Only use spare parts approved by the manufacturer. Do not attach any accessories to the product that have not been supplied by the manufacturer.
• Do not make adjustments to the product when the child is in it
• When in the “Bedside sleeper Configuration” (fastened to the bed), the crib must never be inclined.
• Do not move the product when the child is inside.
• Do not use the product with more than one child at a time.
• WARNING: Do not place the product close to another product, which could present a danger of suffocation or strangulation, e.g. strings, blind/curtain cords, etc To avoid strangulation hazards, never give children objects with strings attached, or leave these objects within their reach.
• Prolonged exposure to direct sunlight may cause the product’s colour to fade. After prolonged exposure of the product to high temperatures, wait a few minutes prior to putting your child in it.
• All assembly couplings must be fastened correctly. Be sure there are no loose screws, as a child’s body or clothing (e.g., laces, necklaces, cords from pacifiers) may get trapped and cause a strangulation hazard.
• Keep the product out of reach of children when it is not in use.
• WARNING: Be careful when the child is in the crib, that objects or bedding items do not fall into the crib

COMPONENTS

A. Support leg with wheels

B. Support leg with non-slip feet

C. Central supporting structure

D. Fixing belts

E. Fabric lining

F. Mattress with removable cover

G. Upper tubular structure

H. Upper removable tubular structure

I. Bag

A1) Height adjuster button

A2) Removable structure support

A3) Height indicator

A4) Feet rotation release button

A5) Adjustable feet

A6) Wheels with brake

B1) Non-slip feet

B2) Upper structure fastening support

C1) Fixing pin

C2) Fabric lining fixing button

C3) Grey fixing buckles

D1) Red anchoring buckles

E1) Belt with clip

E2) Pocket

E3) Zip for fabric removal

E4) Zip for Bedside sleeper opening

E5) Mesh window

E6) Side support for restraint

G1) Leg fixing

H1) Removable tubular structure release button

ASSEMBLY OF THE CRIB

1. Hold the support leg making sure that the external tube slides upwards until you hear the locking CLICK in the first position (fig. 1). Repeat the same operation with the other support leg.

2. Fix the central supporting structure to the 2 legs as illustrated in figure 2. The CLICK of the pivot indicates correct fixing of the structure (fig. 3).
   WARNING: make sure that the grey buckles are on the same side as the adjustable feet (fig. 4).

3. Assemble the upper structure and the fabric to the legs, sliding the tube of the leg inside the side pocket of the fabric (fig. 5). Carry out this operation for both sides.

4. Subsequently fix the upper structure to the legs, inserting the relative plastic support as illustrated in figure 6. Push down– wards until you hear the CLICK of correct fixing (fig. 7). Carry out this operation for both sides.

5. Fix the fabric lining to the central structure, hooking the 2 belts with clips positioned at the bottom of the lining (fig. 8).

6. Position the mattress on the bottom of the crib (fig. 9).

7. Lock the 2 wheels of the crib, lowering the levers that activate the brakes (fig. 10).
   At this point the crib is ready to be used.
   WARNING: check to make sure that all of the fasteners have been correctly attached and that the zips are closed and locked right to the end of their travel.
   WARNING: do not use the crib with adjustable feet partially or totally rotated and unlocked (fig. 11). The correct position for use is illustrated in figure 12. In the case of accidental knocks against adjustable feet, return them to the correct position by lifting the crib slightly.
   HEIGHT ADJUSTMENT OF THE COT
   The crib can be adjusted to different height positions. In order to adjust the height, pull the adjustment lever upwards and lift the crib to the desired position (fig. 13). Repeat this operation on the opposite side.
   The base of the crib can be inclined slightly by adjusting the 2 legs to different heights (fig. 14).
   WARNING: the crib can be inclined with a maximum variance of 2 positions between one leg and the other (for example: the right leg in position 3 and the left leg in position 1, see fig. 15).
   WARNING: The head of the child should always be positioned on the highest side (fig. 16).
   BEDSIDE SLEEPER MO DE (FIXING TO THE BED)
   The crib can be fixed to the parent’s bed (Bedside sleeper mode).
   WARNING – IMPORTANT FOR THE SAFETY OF YOUR CHILD
   This method is only possible with bed types that comply with all of the conditions described in this paragraph. In particular the side support of the crib should always be put close to the parent’s mattress and the mattress should always be aligned with the height of the side support for restraint of the crib (see fig. 17). Furthermore, the crib should be firmly fixed to the structure of the parents bed or to the mattress support (net or slats).
   WARNING: Check to make sure that the crib in the Bedside sleeper mode does not interfere with the parent’s bed.
   WARNING: During use, make sure that the parents bed sheets, blankets etc. do not enter and cover the interior of the crib.

8. Pull the lateral zips all the way down to open the lowerable side (fig. 18).

9. Then press the removable tubular structure release button and remove partially on one side and then on the other (fig.19). Once this operation has been performed on both sides, remove the tube and fix it to the legs of the structure using the relative supports (fig. 20).
   WARNING: use the crib with the tube lowered, only in the Bedside sleeper mode.

10. Move the crib close to the parent’s bed and check the height of the crib compared with the mattress of the parents bed.
    WARNING: the height of the parent’s mattress should always be level or be more than that of the side support for containment of the crib max 2cm (fig. 21).
    WARNING: in the Bedside sleeper mode the 2 legs of the crib should always be adjusted to the same height.

11. In order to fix the crib to the parents bed (Bedside sleeper mode) use the pair of straps provided. The straps can be found in the lower pocket of the fabric lining (fig. 22).

12. Fix the grey buckles underneath the fabric lining on both sides. Make sure that the red buckles are positioned above the strap belt as illustrated in figure 23.

13. Subsequently fix the belt around the structure of the parent’s bed, from the bottom towards the top (fig. 24) and fix the red buckle to form a loop (fig. 25). Repeat this operation on the other side. For easier installation, during fixing of the buckles, we suggest that the crib is kept at a short distance from the parent’s bed.

14. At this point, move the crib to the side of the parent’s bed and tighten the loop by pulling the belts firmly (fig. 26). Carry out this operation on one side and then on the other side, adjusting the belts until the crib is firmly in contact with the parents mattress.
    WARNING: before every use always check to make sure that there is no space between the parent’s mattress and the side of the crib. If there is, pull the belts firmly to tighten until there’s no space and the permitted condition of use has been restored.

15. Store any excess of belts inside the pocket positioned on the bottom of the fabric lining.

16. Lock the wheels of the crib as described in point 7.

If, during the fixing operations of the crib to the parent’s bed, it is not possible to slide the feet of the crib under the parent’s bed, it is still possible to fix the crib following the operations described in the previous points by rotating the adjustable feet during alignment of the crib to the bed.

In order to rotate the feet pull the rotation release button using one hand and turn the feet of the crib inward (fig. 27).

WARNING: Use of the product is only permitted with beds and/or mattresses with straight sides. Use of the product with round beds and/or mattresses or water beds is not permitted.

WARNING: When the product is used in the “Bedside sleeper mode” (fixing to the bed, it should always be fitted to the long side of access to the bed. DO NOT fix the product to the head or bottom of the bed.

MAINTENANCE ADVICE

The crib and the mattress have a resistant fabric cover, which is completely removable and washable.

The removal/application activities should be carried out by adults only. On a regular basis check the condition of the product and the presence of any possible damage. In the

case of damage do not use it and keep it out of the reach of children.

For washing of the fabrics, carefully comply with the instructions indicated on the label.

For cleaning do not use solvents, abrasive products or aggressive products.

Hand wash in cold water

Do not bleach

Do not tumble dry

**** Do not iron

Do not dry clean

After each wash check the resistance of the fabric and of the stitching.

WARNING: During the removal and/or application of the lining, handle the fabric carefully in order to avoid accidental damage or tears.

WARNING: the removal and/or application operations may take a few minutes and should be carried out by an adult.

MAKING THE BED

It is possible to unfasten the crib from the parents’ bed in order to make the bed easily. Just unfasten the grey buckles located below the fabric finish.

To re-secure the crib to the parents’ bed, pull once again the belts to make sure the crib is properly and firmly secured to the parents’ bed. Pay attention to follow all the steps previously mentioned in paragraph ‘’Bedside sleeper mode (Fixing to the bed)’’.

REMOVABLE LINING

17. Remove the mattress and release the buttons on the lower part of the fabric structure (fig. 28).

18. Press the buttons located on the legs’ fastening point (fig.  29) and pull the upper tubular structure upward, removing  the fabric lining from the legs (fig. 30). Perform these operations on both sides.

19. Open the lateral zips located on either end of the lowerable side and press the release buttons to remove the detach– able upper tube, as explained in the paragraph “Co-sleeping

Mode (attached to the bed).” Then pull out the removable upper tubular structure (fig. 31), paying attention not to damage the internal part of the lining.

20. Open the zip located on the upper edge of the crib and remove the fabric lining completely (fig. 32).

DISASSEMBLING THE CRIB

The crib can be fully disassembled in order to store it in the bag supplied with the product. To disassemble the crib, repeat the operations described in points 17-18 of paragraph ‘’Removable lining’’. Then unfasten the central support structure by pressing the fastening pins on both crib’s legs (fig. 33).

WARRANTY

The product is guaranteed against any conformity defect in normal conditions of use as provided for by the instructions for use.

The warranty shall not therefore apply in the case of damages  caused by improper use, wear or accidental events.

For the duration of warranty on conformity defects please refer to the specific provisions of national laws applicable in the country of purchase, where provided

ARTSANA UK Ltd.
2nd Floor

1 Imperial Place

Maxwell Road

Borehamwood

Hertfordshire – WD6 1JN

01623 750870 (office hours)

www.CHICCO.co.uk

ARTSANA S.p.A.

Via Saldarini Catelli, 1

22070 Grandate (CO) – Italy

Tel. (+39) 031 382 111

Fax (+39) 031 382 400

www.CHICCO.com

References

• Site Officiel Chicco Belgique | Chicco.be
• Ihre Vetrauensmarke für Baby- & Kinderartikel | Alles für Ihr Baby
• Official Corporate Chicco website
• Tienda para bebés y recién nacidos | Chicco Argentina
• Site Oficial Chicco Brasil
• Chicco México
• Ihre Vetrauensmarke für Baby- & Kinderartikel | Alles für Ihr Baby
• Productos Bebés y Niños | Chicco.es
• Site Officiel Chicco France | Chicco.fr
• Best baby products in India | Infant care products online Chicco India
• Chicco Portugal - Puericultura, Roupa e Brinquedos
• Официальный сайт Chicco Россия
• UK.COM

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>