ALLEN HEATH IP1 Audio Source Selector and Remote Controller Instruction Manual
- June 3, 2024
- ALLEN HEATH
Table of Contents
ALLEN HEATH IP1 Audio Source Selector and Remote Controller
IP1 /EU
Fitting Note
The IP1 is part of the Allen & Heath IP series of remote controllers.
Live requires firmware V1.60 or higher to work with IP1.
This product must be installed by a professional installer or qualified
electrician.
Mounting the Remote Controller
This model fits standard UK wall boxes (BS 4662) and European wall boxes (DIN
49073) with a minimal depth of 30mm and Honeywell / MK Elements or compatible
plates. Refer to the instructions of the face plate and/or wall box for screw
specification and mounting.
Connection and configuration
The IP1 provides a Fast Ethernet, PoE compliant network port for connection to
the mixing system.
The maximum cable length is 100m. Use STP (shielded twisted pair) CAT5 or
higher cables.
The factory default network settings are as follows:
| Unit Name | IP1 |
|---|---|
| DHCP | Off |
| IP Address | 192.168.1.74 |
Subnet Mask255.255.255.0
Gateway| 192.168.1.254
When connecting multiple IP Remote Controllers to the same network, ensure
each unit is set to a unique Name and IP Address beforehand.
A jumper link on the main PCB board lets you reset the network settings to
factory default. To reset, short the link for 10s whilst applying power to the
unit.
Refer to the IP1 Getting Started Guide available for download at www.allen-
heath.com for more information on IP1
connections, settings and programming.
Front panel
Technical specs
| Network | Fast Ethernet 100Mbps |
|---|---|
| PoE | 802.3af |
| Max power consumption | 2.5W |
| Operating Temperature Rang | 0deg C to 35deg C (32deg F to 95deg F) |
Read the Safety Instructions Sheet included with the product before operating.
A limited one year manufacturer’s warranty applies to this product, the
conditions of which can be found at:
www.allen-heath.com/legal
By using this Allen & Heath product and the software within it you agree to be
bound by the terms of the relevant End
User Licence Agreement (EULA), a copy of which can be found at: www.allen-
heath.com/legal
Register your product with Allen & Heath online at: http://www.allen-
heath.com/support/register-product/
Check the Allen & Heath website for the latest documentation and software
updates
Copyright © 2021 Allen & Heath. All rights reserved
References
- Allen & Heath - Heard Everywhere
- Allen & Heath - Heard Everywhere
- Legal - Allen & Heath
- Product Support - Allen & Heath