niko 350-34003 Motion Detector M34LR KNX 39-41 m 360° for Flushmounting Box Instruction Manual
- June 3, 2024
- niko
Table of Contents
niko 350-34003 Motion Detector M34LR KNX 39-41 m 360° for Flushmounting
Box
350-34003
This motion detector with 5 channels is suitable for KNX systems. It can be
installed in a flush-mounting box. Spring clips for flush-mounting and a
surface-mounting box can be ordered separately. In conformity with the
European directive for EMC and safety EN 60669-2-1.
- High performance (up to 41 m)
- Plug-in terminals for fast installation
- Easy configuration (well-structured ETS file)
- 5 channels
- Various applications: presence, lux, constant light switch, HVAC, alarm
- IP40
- For flush-mounting box, flush or surface mounting via accessories
Detection range
TOOLS
Technical data
- Article number 350-34003
- Configuration master/secondary
- Input voltage 30 Vdc via KNX-bus
- Detector output KNX
- Maximum power consumption 0.3 W
- Maximum current consumption 10 mA
- Light intensity range 10 lux – 2000 lux
- Number of channels 5 channels
- Switch-off delay 1 s – 18 h 12 min 15 s
- Detection angle 360 °
- Detection range (PIR) ø 41 m from a height of 3 m
- Ambient temperature -20 – +50 °C
- Mounting method flush-mounting box
- Mounting height 2 – 3 m
- Drill diameter 56 mm
- Minimum flush-mounting depth 48 mm
- Colour white (RAL 9010)
- Dimensions visible (HxWxD) 111 x 111 x 53 mm
- Dimensions (HxWxD) 111 x 111 x 70 mm
- Wire capacity – ø 0.8 mm
- Protection degree IP40
- Impact resistance IK02
- Modification of settings ETS software
- Marking CE
Accessories
- 390-34103 Surface-mounting box for M34LR
- 390-34203 Flush-mounting box with spring clips for M34LR/M34HC
Dimensions
Wiring diagram
warranty
4 year warranty
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>