STAHL 265083 Cable Gland with Multiple Sealing Insert Black Instruction Manual
- June 3, 2024
- STAHL
Table of Contents
STAHL 265083 Cable Gland with Multiple Sealing Insert Black Instruction
Installation Equipment and Accessories
Cable gland with multiple sealing insert Black 8161/7-M25-9999-MFD-04035 Art. No. 265083
- For safe cable entry in Ex e and Ex i areas
- Can be used at temperatures of between -60 … +75 °C, degree of protection IP68
- Available in Ex e and Ex i versions (Ex i version distinguished by its blue cap nut)
- Suitable for cable diameters from 1 … 48 mm
- Versions with multi- seal inserts
WebCode 8161B
R. STAHL’s 8161/ 7 and 8161/ 8 series cable entries can be used to safely run cables into Ex e enclosures. They are suitable for cables between 1 to 48 mm in diameter. They are available for Ex e and Ex i circuits – the Ex i version can be distinguished by its blue cap nut. A stopping plug can be integrated to seal any cable entries that are not being used.
Technical Data
Explosion Protection
Ex version| Ex e
Application range (zones)| 1
2
21
22
IECEX gas certificate| IECEx PTB 14.0011 X
IECEx gas explosion protection| Ex eb IIC Gb
IECEX dust certificate| IECEx PTB 14.0011 X
IECEx dust explosion protection| Ex tb IIIC Db
ATEX gas certificate| PTB 14 ATEX 1008 X
ATEX gas explosion protection| E II 2 G Ex eb IIC Gb
ATEX dust certificate| PTB 14 ATEX 1008 X
ATEX dust explosion protection| E II 2 D Ex tb IIIC Db
Ambient Conditions
Ambient temperature| -40 °C … +75 °C
Use at the height of| < 2000 m
Mechanical Data
Version| Multiple seal
Strain relief| No
Degree of protection (IP)| IP66
Degree of protection note| IP68 at 5 bar 30 min. (IP protection according to
IEC/EN 60529)
Sealing material| EPDM profile seal
Sealing ring material| EPDM
Material| Polyamide
Material 2| Glass fibre reinforced
Silicone-free| Yes
Self-extinguishing| Yes
Mechanical Data
Flame-retardant| Yes
Halogen-free| Yes
Surface resistance| ≤1013 Ω
Number of cables| 4
Clamping range| 3.2 – 3.5 mm
Armouring type| Unarmoured cable types
Cable entry| 1 x M25 – 4 x Ø 3,2 – 3,5 mm
Clamping range| 3.2…. 3.5 mm
Total length| 38 to 46 mm
Width across corners| 32 mm
Width across flats| 29 mm
Thread size| M25
Thread length| 10 mm
Thread pitch| 1,5 mm
Impact strength (IEC 60079)| 7 J
Impact strength| 7 J
Colour| Black
Lot size| 50
Weight| 0.02 kg
Weight| 0.04 lb
Dimensional Drawings (All Dimensions in mm [inches]) – Subject to
Alterations
- M = Thread size
- SW = Width across flats
- L1 = Thread length
- L = Total length
Cable glands without bend protection
Thread size| Width across flats| Total length| Total length (with long thread)| Thread length| Thread length (long thread)| Clamping range| Clamping range + reduction sealing
insert
| Di- men- sion d1| Di- men- sion d2| Di- men- sion d4
M12| 16.00
mm
| 29 to 34
mm
| 35 to 40
mm
| 9.000
mm
| 15.000
mm
| 3.00 – 6.00
mm
| 1.00 – 6.00
mm
| 18 mm| 7.3
mm
| 6.3
mm
M16| 20.00
mm
| 31 to 37
mm
| 37 to 43
mm
| 9.000
mm
| 15.000
mm
| 5.00 – 9.00
mm
| 2.00 – 9.00
mm
| 22 mm| 10.3
mm
| 9.3
mm
M20| 24.00
mm
| 36 to 43
mm
| 41 to 48
mm
| 10.000
mm
| 15.000
mm
| 7.00 –
13.00 mm
| 4.00 –
13.00 mm
| 27 mm| 13.3
mm
| 13.3
mm
M25| 29.00
mm
| 38 to 46
mm
| 43 to 51
mm
| 10.000
mm
| 15.000
mm
| 10.00 –
17.00 mm
| 7.00 –
17.00 mm
| 32 mm| 17.3
mm
| 17.3
mm
M32| 36.00
mm
| 42 to 50
mm
| 45 to 53
mm
| 12.000
mm
| 15.000
mm
| 13.00 –
21.00 mm
| 9.00 –
21.00 mm
| 40 mm| 21.3
mm
| 21.3
mm
| | | | | | | | | |
---|---|---|---|---|---|---|---|---|---|---
M40| 46.00
mm
| 52 to 65
mm
| 58 to 71
mm
| 12.000
mm
| 18.000
mm
| 17.00 –
28.00 mm
| 12.00 –
28.00 mm
| 51 mm| 28.3
mm
| 30
mm
M50| 55.00
mm
| 59 to 72
mm
| 63 to 76
mm
| 14.000
mm
| 18.000
mm
| 23.00 –
35.00 mm
| 16.00 –
35.00 mm
| 61 mm| 35.3
mm
| 40
mm
M63| 68.00
mm
| 64 to 78
mm
| 67 to 81
mm
| 15.000
mm
| 18.000
mm
| 34.00 –
48.00 mm
| 28.00 –
48.00 mm
| 75 mm| 48.3
mm
| 53
mm
We reserve the right to make alterations to the technical data, dimensions, weights, designs and products available without notice. The illustrations cannot be considered binding
R. STAHL Schaltgeräte GmbH | Am Bahnhof 30 | 74638 WALDENBURG
Tel. +49 7942 943 1700 | +49 7942 943 1777 | Email: sales.de@r-stahl.com | r-stahl.com
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>