INNOVATIVE 8318 Large Flexmount Instruction Manual
- June 3, 2024
- INNOVATIVE
Table of Contents
8318 Large Flexmount
Instruction Manual
8318 Large Flexmount
Parts List
Installation Instructions
MODEL 7500 Parts List
OPTIONAL SPACER KITS
In some cases, the mounting surface on your monitor may be recessed further
than permitted by VESA® standards. As a result, a spacer kit may be required.
.25″ Spacer Hardware Kit
(4) .25″ Spacers
(4) M4 x 18mm Phillips Pan Head Screws
Order # P404923-B
.5″ Spacer Hardware Kit
(4) .5″ Spacers
(4) M4 x 25mm Phillips Pan Head Screws
Order # P404923-C
How do I counterbalance my arm?
IMPORTANT!
- Monitor must be on arm
- Arm must be in mount
Press the arm down to approximately parallel with the desk prior to turning the strength adjustment screw.
If the arm drifts upward, turn the adjustment screw clockwise.
If the arm drifts downward, turn the adjustment screw counter-clockwise.
Depending on the weight of your monitor, you may have to make 15-20 turns.
In some instances, further counterbalance adjustments are needed to allow the
arm’s instant height adjustment function to work properly.
If your arm is not staying in position after performing step 1, follow these
steps:
With arm in raised position, tighten set screw (A).
With arm in horizontal position, tighten set screw (B).
Do not over tighten screws.
SWITCH™ Installation Instructions
Horizontal Positioning
SWITCH™
Installation Instructions | Vertical Positioning
SWITCH™ Parts List
| ITEM | DESCRIPTION / PART NO. | QUANTITY |
|---|---|---|
| Rotation Prevention Bracket | ||
| 106271 | 1 |
10-32 x 1/2″ FPhMS
709129| 4
M4 x 12mm Pan Head Screw
701153| 8
75/100mm VESA® Adapter
109464| 2
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>