Liprous DY101 Bluetooth Headset User Manual

Liprous DY101 Bluetooth Headset

INTRODUCTION

Thank you for purchasing your new DY101 Bluetooth Headset. This user manual will provide you with all of the information you need to get started with your Headset. If you have any problems setting up or using your Bluetooth Headset, please contact us by email at: DY_Bussiness@outlook.com Please read this manual carefully before using the product and keep it properly. Alternatively, solutions to common problems can be found in the FAQs the section at the end of this manual.

Package Contents

Product Overview

How to use

A . Bluetooth Pairing and Connection

• In power off status, press and hold the MFB for 3 seconds to enter pairing mode with LED Blue & Red flash alternately.
• Open the Bluetooth function of your device. Search and click to connect to “DY101” on the Bluetooth list of your phone. The LED will change to Blue and flash slowly after connected. When the device cannot search for bluetooth,shut down the bluetooth and restart the search

Tips:
Please make sure the Bluetooth version of your device is 3.0 or above before connecting

How to pair with a computer

Pair with a computer via USB Dongle

• Plug the USB Dongle into the USB port of your computer and wait for your computer to recognize it. The LED indicator on the USB Dongle flashes blue.
• Press and hold the MFB button of DY101 for 3 seconds to enter pairing mode.Check that the indicator of the headset flashes blue and red alternately. You will hear the voice guidance say”Pairing”.
•  Pairing is successful when you hear “Your headset is connected” and the LED indicator on the USB Dongle is solid blue. This pairing process can take up to 20 seconds.

Pair with a computer via Bluetooth C: Reconnect

• On your device, press and hold the MFB button of DY101 for 3 seconds to enter pairing mode, makes it discoverable by the computer. Check that the indicator flashes blue and red alternately. You will hear the voice guidance say”Pairing”.
•  On your PC, select Start > Settings > Bluetooth & other devices > Add Bluetooth or other device > Bluetooth > Click on the model number [DY101] of your device. Pairing is successful when you hear “Your headset is connected”. A window will pop up indicating the Bluetooth connection is complete. If your computer asks for a Bluetooth driver, contact your computer manufacturer

Check the sound settings to make sure sound is played via the correct output and input

• The microphone and the speaker of the headset may be disabled or not set as the default device on your computer.
• Right-click the Speakers icon at the bottom right, then click Open Sound settings.
• Select [DY101] as your output device (speaker).
• Select [DY101] as your input device (Microphone).

PC Connection Settings **Zoom & Other Setting Apps**

C: Reconnect

• The headphone has matching records.
•  In off status, long press MFB for 3 seconds to start up, with Blue Led flickers 3 times,the headphone will search and reconnect the paired device automatically.

D: Delete paired records

In on status, long press MFB and Volume+ for 5 seconds at the same time to delete paired records,with Red & Blue LED flickers once at the same time.Meanwhile, delete [DY101] from the paired list on your device and search for connections again.

Operations Instructions

Charging Method

Please charge the DY101 at once when the Red LED flash. Charging time is about 2 hours. Solid Red LED turn off and Blue LED turn on when full charged.

Tips:

• Please charge the headset once every two months if you won’t use it for a long time.
• The headphone need to be charged when prompts that the power is low. In order to ensure the charging quality, the earphone will automatically disconnect from the mobile phone when charging

LED Indicator

Voice Prompt

FAQs

• Q: How to reconnect and operate when failed to reconnect?
  • A: When DY101 connected to your mobile phone successfully for the first time, it will search and reconnect the paired device automatically when power on. If the reconnection failed, please pair and connect again. The headset can be reconnected in 5 minutes. It will power off auto matically if disconnected over 10 minutes.
• How to delete pair record?
  • A: In power-on status, long press Volume+ and MFB for 5 seconds to clear the pair record. If the pair record has been delete, DY101 will not reconnect the device automatically. You need to connect it manually.
• Q: What ‘s the password for pairing?
  • A: Some devices require a password for pairing. Ple ase try 0000, 8888,1111,or 1234.
• Q:What devices could charge for the headset?
  • A: Any car charger, power bank, PC etc. (DC 5V / above 500mA)
• Q: What to do if I cannot turn the power on or fail to connect to devices?
  • A: Please try to reset the headset. Connect the headset to the power supply. This will reset the headset and turn off the power, then turn on the power to use it. If you still cannot use it normally, you can ask customer service or manufacturer for technical support.
• Q: Is the active noise reduction technique applied in this headset?
  • A: This headset is specially developed for call centre and has the noise reduction function for uplink calls, but it does not provide the local active noise reduction function
• Q: Can I use the headset to play music?
  • A: The main application scenario of this headset is business calls and it focuses on the human voice frequency band. When used for music playback, the experience will be worse than that of a stereo headset.
• Q: How can I connect the headset to my computer?
  •  Plug the dongle to the USB port of your computer to connect the headset.
  • If your computer has Bluetooth function, you can use the headset by connecting to Bluetooth.
• Q: Why does the headset turn of automatically?
  • A: If there is no connection for more than 5 minutes or the battery voltage is lower than 3.1V, the he adset will automatically shut down. Please restart or charge the headset.

Precautions

• Note on static electricity accumulated in the body may cause mild tingling in your ears.To minimize the effect. wear clothes made from natural materials.
•  Do not place this headset in a place exposed to humidity, dust, soot or steam,or subject to direct sunlight. Do not leave the headset in a car for a long time.lt may cause a malfunction. Listening with this headset at a high volume may affect your hearing. For traffic safety. do not use this headset while driving or cycling.
•  Do not use the headset in places where it would be dangerous if you are unable to hear ambient sounds, such as at railroad crossings, train station platforms.pedestrian crossings,and construction sites.
•  Do not put weight or pressure on this headset as it mayy cause the headset to deform during long storage.
•  Do not subject the headset to excessive shock.
•  Clean the headset with a soft dry cloth.
•  Do not expose the headset to water. The headset is not waterproof. Remember to follow the precautions below.
•  Be careful not to drop the headset into a sink or other container filled with water.
•  Do not use the headset in humid locations or in bad weather, such as in the rain or snow.
•  Do not get the headset wet. If you touch the headset with wet hands or put the headset in a damp article of clothing. the headset may get wet and this may cause a malfunction of the headset.
•  If you experience discomfort after using the BLUETOOTH device, stop using the BLUETOOTH device immediately. Should any problem persist, please contact us.
•  If you have any questions or problems concerning this headset that are not covered in this manual, please contact us by email at: DY_Bussiness@outlook.com

Limited 18-Month warranty

What does this warranty covers?

SKY WING Communication Electronics Co.,Ltd SKYWING warrants to the original purchaser of this product that the product shall be free of defects in design. assembly,material,or workmanship. What the period of coverage is.Skywing warrants the product for 18 Months. What will we do to correct problems? SKywing Will repair or replace,at its option,any defective product free of charge(except for shipping charges for the product).

What is not covered by this warranty?

All above warranties are null and void if the product is not provided to Skywing for inspection upon Skywing’s request at the sole expense of the purchaser,or if Skywing determines that the product has been improperly installed, altered in any way.or tampered with.The Product Warranty does not protect against acts of God such as flood,earthquake, lightning.war, vandalism,theft, normal use wear and tear, erosion,depletion, obsolescence, abuse,damage due to low voltage disturbances(e.g.brownouts or sags),the non- authorized program,or system equipment modification or alteration. How to claim the warranty Please contact retailers or visit DY_Bussiness@outlook.com for more information.To extend the warranty period, please visit our website and register as our member within 1 month of purchasing the product.

Disclaimer
Every effort has been made to ensure that the information and procedures in this guide are accurate and complete, no liability can be accepted for any errors or omissions and we reserve the right to make any changes without further notice to any products mentioned herein.

Bluetooth

The Bluetooth word mark and logos are registered trademarks owned by the Bluetooth SIG, Inc. and any use of such marks by SKY WING Communication Electronics Co., Ltd is under license. Other trademarks and trade names are those of their respective owners.

FCC Statement

This device complies with Part 15 of the FCC rules. Operation is subject to the following two conditions:

•  this device may not cause harmful interference, and
• this device must accept any interference received, including interference that may cause undesired operation.

Changes or modifications not expressly approved by the party responsible for Mcompliance could void your authority to operate the equipment.
Note:
This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
• Consult the dealer or an experienced radio/ TV technician for help.

Correct Disposal of This Product

(Waste Electrical& Electronic Equipment)

This Marking shown on the product or its literature, indicate that it should not be disposed of with other household wastes at the end of its working life. To prevent possible harm to the environment or human health from uncontrolled waste disposal, please separate this from other types of wastes and recycle it responsibly to promote the sustainable reuse of material resources. Household user should contact either the retailer where they purchased this product, or their local government o ce, for details of where and how they can take this item for environmentally safe recycling Business users should contact their supplier and check the terms and conditions of the purchase contact. This product should not be mixed with other commercial wastes for disposal

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>