LACOO T-HAD12222-ZJZ White Wood Electric Standing Desk Instruction Manual
- June 3, 2024
- LACOO
Table of Contents
T-HAD12222-ZJZ White Wood Electric Standing Desk
Instruction Manual
T-HAD12222-ZJZ White Wood Electric Standing Desk
| min 730mm max 1220mm
---|---
| 80kg(176Ibs)
Read the entire instruction manual before you start installation and assembly.
If you have any questions regarding any of the instructions or warnings,
please contact our online after-sale service for help.
CAUTION: Use with products heavier than the rated weights indicated may
result in instability causing possible injury.
- Mounts must be attached as specified in assembly instructions. Improper installation may result in damage or serious personal injury.
- Safety gear and proper tools must be used. This product should only be installed by professionals.
- Make sure that the supporting surface will safely support the combined weight of the equipment and all attached hardware and components.
- Use the mounting screws provided and DO NOT OVER TIGHTEN mounting screws.
- This product contains small items that could be a choking hazard if swallowed. Keep these items away from children.
- This product is intended for indoor use only. Using this product outdoors could lead to product failure and personal injury.
IMPORTANT: Ensure that you have received all parts according to the
component checklist prior to installation. If any parts are missing or faulty,
please contact our online after-sale service for help.
MAINTENANCE: Check that the bracket is secure and safe to use at regular
intervals (at least every three months).
Handeset Instruction
Lifting Function:
- Press ” ” button, the desk will rise and stop automatically when it rises to the highest point.
- Press ” ” button, the desk will descend and stop automatically when it descends to the lowest point.
Reset Function:
- When the height of the desktop is not correct, it is necessary to reset and correct, please hold the ” ” and ” ” keys for more than 3 seconds, until the red indicator light comes on, release the keys, the system has entered the reset and ready state.
- To reset, press and hold the ” ” key, the system will descend to the lowest point of the machine, and then automatically start bouncing up until the system is reset and released.
Problem Solving:
- The red indicator light is on to indicate that it is in the state of reset preparation. You can press and hold the ” ” key to reset it in the aforementioned way.
- The flashing red indicator light indicates a signal failure, which may be caused by the non-rotation of the motor, the incorrect return of Hall data, and the verification of the proper handling, the ” ” button can be pressed and held down in the afore mentioned manner to enter the reset preparation state.
- The red indicator light flashes twice to indicate that the system is overheated. Let the system rest for more than 18 minutes and then it can be used normally again.
- If the above method fails to solve the problem, unplug the power supply, check the system components and connections are intact, power up again, re-operation.
- If the above operation, the desk still can not work properly, please contact customer service for processing.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>