TOPMAQ LD-P02201 20 Ton Hydraulic Press User Manual
- June 3, 2024
- TOPMAQ
Table of Contents
TOPMAQ LD-P02201 20 Ton Hydraulic Press
20TON SHOP PREss
| Ref# | Description | QTY |
|---|---|---|
| 1 | Upper Crossbeam | 1 |
| 2 | Bolt Ml6x35 | 8 |
| 3 | Flat Washer 016 | 8 |
| 4 | NutM16 | 8 |
| 5 | Spring | 2 |
| 6 | Bottle Jack | 1 |
| 7 | Jack Base | 1 |
| 8 | Hook | 2 |
| 9 | Post | 2 |
| 10 | Flat Washer 08 | 2 |
| 11 | Nut MS | 2 |
| 12 | Press Plate | 2 |
| 13 | Press Platform | 1 |
| 14 | Rod | 2 |
| 15 | Spreader | 1 |
| 16 | Angle Steel Leg | 2 |
| 17 | BoltM12x3O | 4 |
| 18 | Flat Washer 012 | 4 |
| 19 | Nut Ml2 | 4 |
| 20 | Socket Head Bolt M8x12 | 2 |
A NOTE ON SAFETY
We’ve done all we can to assure this press offers the utmost safety, but you have to do your Ref# amount of warning can take the place of yom good judgment. so make sure it’s the first thing you bring to any job. Beyond that here are some obvious tips. Steel and other materials can shatter, so always use protective eyewear tha1 complies with the appropriate ANSI code. If you detect anything that may indicate imminent structural failure stop using the press immediately and inspect it thoroughly. Bolt the press to the floor if it is to be used on bulky or unstable items. Do not use the press to compress springs or any other item that could disengage and cause a potential hazard.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>