Odyssey X86J4125 v2 IoT Edge PC User Manual

: June 3, 2024
: Odyssey

Odyssey X86J4125 v2 IoT Edge PC

Package Contents

ODYSSEY – X86J4125 v2
User Manual
International Power Adapter

[Not included in TELEC version!

SATA Cable
Antenna x2
RTC Battery
Heat Sink [Assembled]
Cooling Fan [Assembled]

[Included in EMMC and Blue version]

Specifications

Processor

| ****

Intel® Celeron® J4125

Frequency: 2.0-2.7GHz

---|---

Coprocessor

| ****

Microchip Raspberry Pi” RP2040 32bit ARM® Dual-Core Cortex®MO+

Graphics

| Intel• UH □ Graphics 600 Frequency, 250 – 750MHz

Memory

Storage

| LPDDR4 8GB

64GB eMMC V5.1

Wireless

| ****

Wi-Fi 802.11 a/b/g/n/ac • 2.4/5 GHz HT160

Bluetooth® 5.0

Networking

| ****

Intel® 1225-V PCle 2.5GbE LAN

Audio

| Microphone+ headphone Combo Connector

Headers

| 28-pin header from Raspberry Pi RP2040

40-pin header compatible with Raspberry Pi

USB

| ****

USB 2.0 Type-A x2

USB 3.1 Type-A xl USB 3.1 Type-C xl

---|---

Video Interfaces

| ****

HDMl2.0a, Up to 4096,2160@ 60Hz 24bpp DPl .2a, Up to 4096×2160@ 60Hz 24bpp

Expansion Sl o t s

| ****

M.2[Key B, 2242/22B0L SATA Ill, USB2.0, UIM M.2 [Key M, 2242/22801, PCle 2.0 ,4

M icro SD ca r d So c k e t

SIM Card Socket SATAIII

RTC

| ****

JST 1.0 CR2032 3V

TPM

| ****

Built-in TPM [2.01.optional external TPM

Power

| ****

DC Jack 5.5/2.1mm or Type-CPD DC Jack inpuL 12-19V DC

Type-C inpuL USB PD

Dimension s

| ****

110x110mm

Certi f ications

| ****

FCC, CE, TELEC, UKCA

Before you Start

Make sure you have the following:

Make sure you have the following:

An external monitor
A keyboard and a mouse
An HDMI Cable

Attaching External Storage

If you have bought the 64GB EMMC storage version of the ODYSSEY – X86J4125 v2, you can skip this step. However, if you need more storage for your needs, feel free to follow this step.
There are four methods of adding storage to ODYSSEY – X86J4125 v2

Through M.2 PCIE Connector
Through M.2 SATA connector
Through SATA Connector
Through Micro-SD Card Slot

Note, Only three storage types support to install an operating system inside (M.2 SATA, M.2 PCIE and SATAI. and the Micro SD Card can only be used as external storage.

Connecting Antennas

Insert the two antennas into the two sockets on the ODYSSEY – X86J4125 v2

Note: One antenna is for Wi-Fi and Bluetooth whereas the second antenna is for strong 5G connectivity

Connecting to a display

There are two ways to connect your ODYSSEY – X86J4125 v2 to an external display

Connecting to a keyboard and a mouse

Connect your favorite keyboard and mouse to the ODYSSEY – X86J4125 v2 through any of the USB connectors

Powering up

There are two ways to power up your ODYSSEY – X86J4125 v2.
Method 1
Use the 12V/2A power adapter [provided]
Method 2
Use a USB Type-C Cable [Supports DP]
Press the power button and you will notice the blue power LED turn on
Wait a few seconds until it boots into the operating system.

Installing an Operating System

ODYSSEY -X86J4125 v2 supports both Windows and Linux operating systems. If you have bought the non EMMC version, you could attach an external storage by following the previous steps and install your desired operating system by creating a bootable USB drive. Also, if you have bought the EMMC version with windows pre-installed, you could additionally install Linux according to your requirements.

Step 1

Connect your bootable USB drive into one of the USB ports on the ODYSSEY -X86J4125 v2

Step 2

Press the power button and keep pressing F7 key on the keyboard until you see the Boot Manager screen.

Step 3

Select the connected USB Drive as the boot drive and press enter

Step4

Then follow the instructions on the installation screen to complete installing your desired operating system.

Adding 46 Cellular Connectivity

Step 1

Insert a Micro-SIM Card to the bottom layer of the slot.

Step 2

Insert a USB interface 4G module.

Note: This module is a must have if you want to use the connected SIM card.

Pinout diagram

FAQ

Q: How can I access the BIOS setup?
- A: Press the Power Button and keep pressing DEL key until you see the BIOS Setup.
Q: I cannot connect to Wi-Fi and Bluetooth
- A: Check BIOS settings and enable Wi-Fi and Bluetooth from BIOS.
Q: ODYSSEY – X86J4125 v2 doesn”t power up
- A: Make sure you use the 12V/2A power adapter provided in the box and check the connection.