HOTTEK HT-960-002 Kettle User Manual

HT-960-002 Kettle
User Manual

Specifications

Dear customers!
Before using the appliance, please, read this User Manual carefully. It contains significant information concerning your personal safety, as well as recommendations how to use proper this appliance and to care for it.
Keep this User Manual, warranty card, cashier’s receipt, as well as, if it is possible, the carton package and immediate package!

General safety instructions

• Read carefully this User Manual before using the appliance.
• Before plugging in, make sure that the voltage specified on the nameplate corresponds to the voltage in the electric power system.
• Always pull out the plug from the socket, if you are not going to use the appliance, if you want to install the component parts or to clean the appliance. Prior to this, the appliance must be disconnected from the power system. When you are pulling out the appliance from the electrical socket, do not pull on the cord, please, pull the plug.
• Never leave the appliance unattended. Always turn it off, even if you have to leave for a short time.
• This appliance is not intended for use by persons (including children) who have a physical, neurological or mental disabilities or a lack of experience and knowledge, except in cases when such persons have been supervised or briefed how to use the appliance by a person responsible for their safety.
• It is necessary to supervise the children in order to prevent their games with appliance
• Keep the appliance and the cord away from heat, moisture, sharp edges, etc.
• Check regularly the cord and the appliance for damage. If there is any problem, do not use the appliance.
• The power line cord has not to be used as a handle to carry the appliance.
• Do not repair the appliance yourself. To repair and replace the faulty cord contact the service workshop.
• Don’t submerge the appliance in water or any other liquid under any circumstances. However, if the kettle has fallen into water, unplug it immediately. Don’t take out from the water under any circumstances the in-lane appliance.
• Do not use the appliance if your hands are wet or damp. Store the ap- pliance in a dry place.
• The appliance is designed for domestic use and not industrial.
• Before using, make sure that your power system is protected from power surges.
• Do not use the appliance outdoor. Special safety instructions
• The kettle can be used only with the standard stand. Do not use the stand for other purposes.
• Do not take the running kettle off the stand. If you need to take off the kettle, turn it off firstly, and only then you can take the kettle off the stand.
• Do not use the appliance and do not put it near hot surfaces, hot plates, and flame.
• Make sure the cord does not come into contact with hot surfaces.
• In order not to endanger the children, never leave them unattended in a room with electrical appliances. Put the kettle in such place where the children do not have access to it.
• The kettle is only intended to heat water. Do not use the kettle to heat any other liquids. Use the kettle for this purpose.
• Fill the kettle only with cold, fresh water.
• Place the kettle on a firm, level surface. If it is the wooden surface, place a protective pad, so as not to damage the wood.
• To avoid burns or damage the things close to the kettle, do not point the kettle nose to people on the wall or on pieces of furniture.
• Before switching on the kettle, make sure the cover is closed properly. Never open the cover in the water heating process
• Do not handle the kettle with wet or damp hands.
• The kettle is heated to a high temperature. Be careful and not to get burned with boiling water or steam. Do not touch any parts of the kettle, except for the handle and switch. Before you take the handle, make sure that the kettle cover is closed securely.
• Be careful when you open and close the cover of hot kettle.
• Before switching on the kettle, check the amount of water in it. The water level is displayed on the scale on the kettle body
• The water level has not to be below the minimum point and be above the maximum point. If the water level is above the maximum point, boiling water can splash out.
• Never operate the kettle without water.
• To avoid danger, do not use the kettle near flammable or explosive vapors.
• Do not leave the kettle plugged in unheated premises at low temperatures. At temperatures below freezing, the thermostat can switch on and thereby to switch on the kettle.
• Installation of this appliance is not provided, since it is delivered ready for service.
• The special transportation regulations do not apply to this appliance. When transporting the unit, use the original packaging. When transporting, avoid drops, shocks and other mechanical effects on the appliance, as well as direct influence of rain and aggressive medium.
• The appliance sale has to be carried out in accordance with the current legislation of the participating countries of the Customs Union.

Overview of the component parts

1. Body of the kettle
2. Nose and filter
3. Kettle cover
4. Device to open the cover
5. Switch “O/I”
6. Water level scale
7. Appliance stand with the cable winding

Before first use

• Remove all packaging materials (stickers, labels, packages, etc.) prior to first use.
• Before using the kettle, pour water into the kettle, boil it, and then drain it. Do this several times. Every time fill the kettle with fresh, cold water to the maximum point.
• To fill the kettle with water turn on the tap and let the water run for 1-2 minutes before fill it into the kettle.
• Always pull out the plug from the socket, if you fill up or add water into the kettle without taking it off the stand.

Using the appliance

• Place the stand on a dry, solid, and horizontal surface.
• Fill the kettle with the required amount of water. Check the water level on the scale (6) on the kettle body. Make sure that the water level is between the minimum and maximum points.
• The amount of water less than 0.5 liter (below the minimum level) can lead to water boil-off, heating and breaking the empty kettle.
• The water exceeding the maximum point (1.7 L) will be splash out when boiling.
• Make sure that the kettle cover (3) is closed correctly and firmly, otherwise the kettle does not switch off automatically.
• Put the kettle on the stand. The base of the kettle has to fit exactly into the stand.
• Pull the plug into the socket.
• Turn the “O/I” switch (5) to position “I”, after that the illumination will light up and heating will begin.
• Do not touch any parts of the kettle, except for the handle.
• When the water boils, the illumination will put out and the kettle will shut off automatically. The switch “O/I” (5) will return automatically to position “O”. The kettle can be turned off manually by moving the switch to “O/I” (5) to position “O”.
• Take the kettle off the stand and pour the water into the cups carefully. The kettle must be switched off.

Attention!
It is strictly prohibited to switch on the kettle without water!

Cleaning and Maintenance

• Before cleaning, pull out the plug from the socket and wait until the kettle cool down.
• Do not use abrasive and aggressive substances to clean.
• Do not immerse the kettle, stand and cord in water or other liquid.
• Clean the body with a slightly damp cloth or sponge. Clean dirt and stains with a soft cloth dampened with a weak solution of gentle detergent.
• Remove the limescale in the kettle regularly. It is formed mainly on the heating element, and prevents heating. The limescale formation rate depends on the degree of water hardness and frequency of the use.

Descaling

• If the kettle is switched off before boiling, you have to remove the resulting limescale in it.
• It is needed to descale regularly when ordinary use of the kettle at least 2 times a year.
• Using ordinary descaling agents, boil the solution in the kettle several times, as described in the instructions attached to the agent. Then pour the solution and rinse kettle.
• Also the limescale can be removed with the vinegar. To do this, fill the kettle to the maximum point with the solution in the following proportions: 1 part of vinegar and 2 parts of water. Turn on the kettle and wait until it turns off automatically. Leave the solution in the kettle overnight. The next morning pour the solution from the kettle. Fill the kettle with clean water up to the maximum point and boil it. Pour the boiled water from the kettle to remove the remains of the solution. Rinse the kettle with water.

Storing

• Unplug the appliance from the power system, drain the water, let it cool and dry.
• Keep the appliance in a clean, dry place out of reach of children.
• When storing the cord can be wound on the cable winding device, which is at the bottom of the kettle stand. Never hang the appliance by the cord!
• Electrical equipment have to be stored in a dry place at ambient tem- perature no higher than plus 40 °C with a relative humidity of 70%, and the absence of dust, acid and other fumes in surrounding medium which affect adversely the materials of the electrical devices.

Utilization
After the end of the service life do not discard the unit with household waste. Hand it at an official collection point for recycling. Doing it you will help protect the environment.
The manufacturer preserves the right to change the design and the specifications of the unit without a preliminary notification.
Unit operating life is 2 years
This product conforms to the EMCRequirements as laid down by the Council Directive 2004/108/ЕС and to the Low Voltage Regulation (2006/95/ЕС)
The serial number is an eleven-digit number, the first four of which indicate the date of manufacture. For example, serial number 0217ххххххх means that the appliance was manufactured in February (the second month of a year) 2017.

om ugett go npogyxma
www.hottek.ru

Documents / Resources

| HOTTEK HT-960-002 Kettle [pdf] User Manual
HT-960-002 Kettle, HT-960-002, Kettle
---|---

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>