JOTRON Tron AIS TR-8000 MkII Inland AIS Transponder User Guide

: June 5, 2024
: JOTRON

Table of Contents

JOTRON Tron AIS TR-8000 MkII Inland AIS Transponder
Introduction
Software Revisions
Block Diagram
Quick Guide
Spare parts
- Counterfeit spare parts
Tron AIS TR-8000 MkII Installasjon Registration Form
Installation completed and successfully commissioned by
References
Read User Manual Online (PDF format)
Download This Manual (PDF format)

JOTRON Tron AIS TR-8000 MkII Inland AIS Transponder

JOTRON Tron AIS TR-8000 MkII Inland AIS Transponder
product

Introduction

The Jotron TR-8000 MkII has been developed to offer you the highest level of performance and durability and we hope that it will provide many years of reliable service. This
product has been designed to meet the highest possible quality standards and should you encounter any problems with this product, please contact your local dealer who will
be pleased to offer any assistance. Jotron Tron AIS TR-8000 MkII consists of two separate units interconnected by Ethernet. The Transponder Unit is the main unit, handling the basic AIS functionality, including sensors and RF functions, while the Display Unit is used for setup and display of the AIS data.

Tron AIS TR-8000 MkII – Operators and Installation.
Tron AIS TR-8000

These are available for download at: www.jotron.com/product category/gmdssais lights/

Software Revisions

The TR-8000 is delivered with software version according to table below which is filled in by Jotron, our Distributor, Dealer, or Installation company. When software update is done according to instructions in Jotron TB 01-2012. Technical Bulletin an additional line of information shall be filled in to reflect the latest change. There will be no need for retraining after SW upgrade is performed.The sub menu that shows software versions can be found selecting

JOTRON Tron AIS TR-8000 MkII Inland AIS Transponder 1

Block Diagram

A typical connection of Dual Display set up.

JOTRON Tron AIS TR-8000 MkII Inland AIS Transponder 2

Quick Guide

Connect

Antennas

Display cable between Display and Transponder
Power to both units
Sensors
External displa
Pilot Port Option
Alarm

Fill in Own Ship information

Ship Name
IMO number
MMS
Call Sign
GPS antenna positions (Internal & external)
Type of Vessel

Check GPS and position

Internal GPS signal strength
Transmitted data

Configure External Display Interface

RS422 always enabled
Ethernet

Configure Pilot port interface[option]

Display or Transponder

Check External Sensor communication

Indicators shows Sensors detected.
Port Monitor shows RAW data from Sensor 1 to Sensor 3
Check External Display communication
Check Communication test
Fill in Voyage Settings.
Navigational status
Destination
ETA
Draught
Cargo Category
Check reception of ship in ship list normal operation.

Optional Accessories

For an overview of the available optional accessories for this product, refer to jotron.com

Spare parts

For an overview of the available spare parts for this product, refer to jotron.com

Counterfeit spare parts

Ensure that all spare parts being fitted to this product are only original spare parts manufactured or approved by Jotron. Any use counterfeit parts will invalidate the product type-approval certificate.

Recycling and Disposal
This product should not be disposed as normal waste and must be handled in accordance with the applicable federal, state and local waste disposal regulations in the country where the equipment is used.

Warranty
All Jotron products are warranted against factory defects in materials and/or workmanship during the warranty period. Refer to the sales terms and conditions for specific warranty information regarding this product.

Service
All services such as testing, installation, programming, replacement, marking, and battery exchange are provided by an authorized Jotron service agent. Improper service or maintenance may destroy the functionality and/or performance of this product. Jotron does not accept any responsibility for the dismantling or reassembling of any Jotron product that occurs externally from a Jotron authorized facility and/or is handled by someone other than an authorized, training, and certified person.

Service agents
Refer to jotron.com for an overview of Jotron partners and distributors. https://jotron.com/partners and distributors.

Tron AIS TR-8000 MkII Installasjon Registration Form

Vessel name| | IMO Number|
---|---|---|---
Flag State| | MMSI Number|
Owner / Company| | Radio Call Sign|
On Board Contact

Name

| | Telephone Numbers| Mobile

GSM

Superintendents

Name

Tonnage

| Antenna Location|

GNSS Antenna connected to External Position Source

| ****

GNSS Antenna connected directly to TR-8000

Internal

---|---|---|---
A=Distance to Bow| mtrs| mtrs
B=Distance to Stern| mtrs| mtrs
C=Distance to Port Side| mtrs| mtrs

D=Distance to Starboard side

| ****

mtrs

| ****

mtrs

Installation completed and successfully commissioned by

Technician, type name|
---|---
Service provider / company|
Place| Date| Signature

Please fill in with capital letters
This form must be sent to Jotron AS, beacon@jotron.com or Fax.: + 47 33 12 67 80 Att: Service department in order to have a valid 24 months product warranty.

Document Revision Log

Document revision log

Rev| Date| Reason for Issue| Author
A| 26.08.2021| New MkII manual in new company profile| ØB
B| 03.01.2022| Added Dual Display drwing in chap 3.| ØB
| | |
| | |
| | |
| | |

NORWAY / HEADQUARTERS

Jotron AS Ringdalskogen 8 3270 Larvik, Norway
Tel: +47 33 13 97 00

SINGAPORE

Jotron Asia Pte. Ltd 10 Ubi Crescent, Ubi Techpark Lobby B, #05-11/12, Singapore 408564
Tel: +65 65 42 63 50 jotron.com

USA

Jotron USA, Inc 6300 Rothway Street, Suite C Houston, TX 77040, USA
Tel: +1 713 268 1061

UK

Jotron UK Ltd. Crosland Park, Cramlington NE23 1LA, UK
Tel: +44 1670 712000

CHINA
Norway Jotron AS Beijing Representative Office (ATC business) No. 1204 room, building D Tiejian plaza, Chaoyang district Beijing 100012 China