LIEBHERR LSMCH Smart Cooling Hub User Guide

LSMCH Smart Cooling Hub
User Guide

Included in the delivery

SmartCoolingHub| Power supply unit
with adapters for EU,
UK and USA| 2x RS485 connectors
Other connectors
available as Liebherr
accessories| 1.5 m cable
Other cables
available as Liebherr
accessories
---|---|---|---

Not included in the delivery

Liebherr networkable appliance
Compatibility check on  SmartMonitoring website| Computer or tablet
with internet access| Slotted screw driver
size: 2,5 mm| LAN cable
(If there is a LAN
network connection)
---|---|---|---

For more information and other accessories visit the SmartMonitoring website: home.liebherr.com/smartmonitoring or contact your dealer.

Preparation

• For assistance with set-up, please contact Liebherr Service (see contact info).
• The plug-in power supply must be plugged together for the local socket standard. Select an adapter and slide onto the power supply unit until it clicks into place. A  power connection designed for the power supply unit should be located near the SmartCoolingHub.
• Broadband Internet connection with wireless network (WLAN 2.4 GHz) or wired (Ethernet/LAN)
• The SSID must be visible for the WLAN connection.
• Share the following network ports within your network and at the Internet transition point (keyword: Firewall):
• DNS: Port 53(OUT)UDP/TCP
• HTTPS: Port 443 (OUT)/TCP WiFi IEEE 802.11 b/g/n 2.4 GHz, WPA2-PSK
• NTP: Port 123 (OUT)/UDP
• Secure MQTT: Port 8883 (OUT)/TCP, 8884 (OUT)/TCP Alternatively: (automatic) UPnP port sharing (Universal Plug and Play)
• DHCP mode active (automatic IP address assignment)
• The MAC address of the SmartCoolingHub must be shared in the network (see label on the back of the SmartCoolingHub if a MAC fi lter is used in your network).
• An Internet-enabled device with a current browser version and a minimum resolution of 1024×768 pixels is required to access SmartMonitoring.
• For your convenience, make a note of the serial numbers of your refrigerators in advance.
• A MyLiebherr customer profi le is required to log in to the SmartMonitoring dashboard (registration possible during set-up).
• You will need additional accessories to set-up other appliances.
• Recommendation: one SmartCoolingHub per room
• If the distance between the SmartCoolingHub and the appliance is greater than 50 m, you should consult a qualifi ed technician for installation.

Getting started

Start the set-up at the following address:smartmonitoring.liebherr.com/setup or scan this QR-Code:

http://lhg.short-co.de/4px3v

You will also fi nd the following there:

• Set-up videos
• Appliance instruction manual
• SmartMonitoring instruction manual

LED Status Description

minutes).
Flashing red rapidly| Network error (no IP address received or no Internet connection available)

For more information, refer to the SmartMonitoring instruction manual.

References

• SmartMonitoring not available | Liebherr
• SmartMonitoring by Liebherr

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>