RYOBI FVM51 Rotary Tool Accessory Kit User Manual
- June 3, 2024
- RYOBI
Table of Contents
RYOBI FVM51 Rotary Tool Accessory Kit
WARNING:
Do not use any attachments or accessories not recommended by the manufacturer
of this product. The use of attachments or accessories not recommended can
result in serious personal injury.
DANGER:
If you are changing an accessory immediately after use, be careful not to
touch the collet, collet nut, or the accessory with your hands or fingers. You
will get burned because of the heat buildup from cutting. Always use the
wrench provided.
ACCESSORY TABLE
ACCESSORY TABLE
Figure| Qty| Accessory| Application| RPM
| 1| 1/16 in. Engraving Bit| Engraving metal, wood, and plastics| 35K
| 1| 1/8 in. Screw Mandrel| Holding polishing wheels| 15K
| ****
4
| (2) 1/2 in. Felt Polishing Wheels
(2) 1 in. Felt Polishing Wheels
| Polishing and buffing metals, stone, glass and ceramics| ****
15K
|
1
| ****
Polishing Compound Vial
| Used with felt polishing wheels to polish metal and plastic| ****
N/A
|
1
| ****
Carbon Steel Brush
| ****
Cleaning and deburring metal, rust and paint
| ****
15K
|
1
| ****
1/4 in. Drum Sanding Mandrel
| ****
Holding sanding drums
| ****
35K
|
4
| ****
(2) 1/4 in. 60 Grit Sanding Bands
(2) 1/4 in. 120 Grit Sanding Bands
| ****
Sanding wood, metal, and plastics
| ****
35K
| ****
2
| (1) 3/8 in. Arch Aluminum Oxide Grinding Stone
(1) 3/8 in. Cylinder Aluminum Oxide Grinding Stone
| ****
Sharpening and deburring metals, steel, and rust
| ****
35K
****| 1| Wrench| Changing accessories on collet| N/A
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>